One month use of Systane® improves ocular surface parameters in subjects with moderate symptoms of ocular dryness

Piera Versura, Vincenzo Profazio, Emilio C CamposDepartment of Surgery and Anesthesiology, Section of Ophthalmology, Alma Mater Studiorum University at Bologna, Bologna, ItalyThe data in this paper were first presented at the 9th International Ocular Inflammation Society (IOIS) Annual Meeting, September 17–20, 2007, Paris, France, and the European Association for Vision and Eye Research (EVER) Congress, October 3–6, 2007, Portoroz, SloveniaObjective: To evaluate the efficacy of Systane® Lubricating Eye Drops in improving the symptoms of moderate ocular dryness.Methods: Fifty subjects with moderate symptoms of ocular dryness were enrolled in this open label study. The mean age of subjects was 57.6 ± 15.4 years. To be eligible, subjects’ tear film break-up time (TFBUT) had to be <10 seconds, and subjects had to have at least one ocular discomfort symptom in addition to dryness. Saline was used for a wash-out period of 3–5 days. Subjects were re-examined, and those continuing to meet the inclusion criteria were dispensed Systane® and re-examined again after 28 days. At each visit, slitlamp examination was conducted, and ocular discomfort symptoms and TFBUT were evaluated. Subjects rated their overall satisfaction at baseline and on the last visit.Results: No significant changes in TFBUT or ocular discomfort symptoms were observed after saline use, compared with screening visit. After 28 days of Systane® use there was statistically significant improvement of TFBUT (p = 0.0001) compared with baseline. Subjects experienced significant symptomatic relief for all 6 ocular discomfort symptoms at the endpoint visit.Conclusion: Systane® effectively relieved the symptoms associated with moderate ocular dryness, with measurable improvement in objective TFBUT, subjective symptoms, and overall satisfaction.Keywords: Systane, lubricant eye drops, TFBUT, ocular dryness, ocular symptom

Synthesis of layered titanosilicate JDF-L1 for fabrication of composite polyamide 6 film

In clay polymer nanocomposite technology, nowadays there is concern about the safety and environmental effects of the nanometric materials. In this work, sheets of layered titanosilicate JDF-L1 were synthesized with a size of 5.3 µmand thickness of 115 nm and used to fabricate composite polyamide 6 (PA6) films. The JDF-L1 synthesis was scaled in one pot and the rosette-like particles obtained were disaggregated using a simple process with NaOH solution. The composite with 2 wt.% of disaggregated JDF-L1, characterized by X-ray diffraction and electron microscopy, showed parallel orientation (with respect to the film itself) and good dispersion of the sheets. The composite had a similar barrier effect as the PA6 and its mechanical properties did not deteriorate. This opens up the use of this composite as a packing material providing other properties, such as a biocidal effect and synergy effect in combination with other additives

Efficacy of two-month treatment with Xiloial® eyedrops for discomfort from disposable soft contact lenses

none4noneVersura P.; Profazio V.; Balducci N.; Campos E.C.Versura P.; Profazio V.; Balducci N.; Campos E.C

Estimating the Underwater Diffuse Attenuation Coefficient with a Low-Cost Instrument: The KdUINO DIY Buoy

A critical parameter to assess the environmental status of water bodies is the transparency of the water, as it is strongly affected by different water quality related components (such as the presence of phytoplankton, organic matter and sediment concentrations). One parameter to assess the water transparency is the diffuse attenuation coefficient. However, the number of subsurface irradiance measurements obtained with conventional instrumentation is relatively low, due to instrument costs and the logistic requirements to provide regular and autonomous observations. In recent years, the citizen science concept has increased the number of environmental observations, both in time and space. The recent technological advances in embedded systems and sensors also enable volunteers (citizens) to create their own devices (known as Do-It-Yourself or DIY technologies). In this paper, a DIY instrument to measure irradiance at different depths and automatically calculate the diffuse attenuation Kd coefficient is presented. The instrument, named KdUINO, is based on an encapsulated low-cost photonic sensor and Arduino (an open-hardware platform for the data acquisition). The whole instrument has been successfully operated and the data validated comparing the KdUINO measurements with the commercial instruments. Workshops have been organized with high school students to validate its feasibility

Scanning Electron Microscopy, X-Ray Microanalysis and Immunohistochemistry on Worn Soft Contact Lenses

The deposits accumulated on the surfaces of soft contact lenses are a cause of problems for the wearer of these lenses, as the deposits are never completely removed by the available washing solutions. Therefore it appears of interest to investigate the composition of these deposits. In this paper we review the major findings in the literature and, in addition, present our personal experience. We have studied new, continuously and daily worn soft contact lenses by scanning electron microscopy (SEM), X-ray microanalysis and immunohistochemistry. We have carefully evaluated preparative methods, and we can conclude that SEM and X-ray microanalysis are best carried out on unfixed, air-dried lenses. The deposits present consist mainly of mucus, especially on the tarsal side of the lenses. Chloride and potassium, coming from the tear fluid, as well as sulfur, derived from proteins, were found. Calcium was very rarely detected. IgG, IgA, IgE and C3c complement fractions were found only on the outer surfaces and not within the lens. We believe that the best characterization of the deposits is achieved by means of correlative techniques on the same lens. In fact, this approach integrates morphology and composition

Caffeine Encapsulation in Metal Organic Framework MIL-53(Al) at Pilot Plant Scale for Preparation of Polyamide Textile Fibers with Cosmetic Properties

Currently in the marketplace, we can find clothing items able to release skin-friendly ingredients while wearing them. These innovative products with high-added value are based on microencapsulation technology. In this work, due to its lightness, flexibility, porosity, chemical affinity and adsorption capacity, metal-organic framework (MOF) MIL-53(Al) was the selected microcapsule to be synthesized at a large scale and subsequent caffeine encapsulation. The synthesis conditions (molar ratio of reactants, solvents used, reaction time, temperature, pressure reached in the reactor and activation treatment to enhance the encapsulation capacity) were optimized by screening various scaling-up reactor volumes (from lab-scale of 40 mL to pilot plant production of 3.75 L). Two types of Al salts (Al(NO3)3·9H2O from the original recipe and Al2(SO4)3 as commercial SUFAL 8.2) were employed. The liporeductor cosmetic caffeine was selected as the active molecule for encapsulation. Caffeine (38 wt %) was incorporated in CAF@MIL-53(Al) microcapsules, as analyzed by TGA and corroborated by GC/MS and UV-vis after additive extraction. CAF@MIL-53(Al) microcapsules showed a controlled release of caffeine during 6 days at 25 °C (up to 22% of the initial caffeine). These capsules were incorporated through an industrial spinning process (with temperatures up to 260 °C) to manufacture PA-6 fibers with cosmetic properties. Up to 0.7 wt % of capsules were successfully incorporated into the fibers hosting 1700 ppm of caffeine. Fabrics were submitted to scouring, staining, and washing processes, detecting the presence of caffeine in the cosmetic fiber. © 2022 The Authors. Published by American Chemical Society

in Utero Exposure to antiemetic and Risk of adult-Onset Colorectal Cancer

BACKGROUND: Incidence rates of colorectal cancer (CRC) are increasing among adults born in and after the 1960s, implicating pregnancy-related exposures introduced at that time as risk factors. Dicyclomine, an antispasmodic used to treat irritable bowel syndrome, was initially included in Bendectin (comprising doxylamine, pyridoxine, and dicyclomine), an antiemetic prescribed during pregnancy in the 1960s. METHODS: We estimated the association between in utero exposure to Bendectin and risk of CRC in offspring of the Child Health and Development Studies, a multigenerational cohort that enrolled pregnant women in Oakland, CA, between 1959 and 1966 (n = 14 507 mothers and 18 751 liveborn offspring). We reviewed prescribed medications from mothers\u27 medical records to identify those who received Bendectin during pregnancy. Diagnoses of CRC in adult (aged ≥18 years) offspring were ascertained by linkage with the California Cancer Registry. Cox proportional hazards models were used to estimate adjusted hazard ratios, with follow-up accrued from birth through cancer diagnosis, death, or last contact. RESULTS: Approximately 5% of offspring (n = 1014) were exposed in utero to Bendectin. Risk of CRC was higher in offspring exposed in utero (adjusted hazard ratio = 3.38, 95% confidence interval [CI] = 1.69 to 6.77) compared with unexposed offspring. Incidence rates of CRC were 30.8 (95% CI = 15.9 to 53.7) and 10.1 (95% CI = 7.9 to 12.8) per 100 000 in offspring exposed to Bendectin and unexposed, respectively. CONCLUSIONS: Higher risk of CRC in offspring exposed in utero may be driven by dicyclomine contained in the 3-part formulation of Bendectin used during the 1960s. Experimental studies are needed to clarify these findings and identify mechanisms of risk