168 research outputs found

    Relationship between Rheological Behaviour and Final Structure of Al

    Get PDF
    Using rheological parameters of ceramic suspensions, it is possible to taylor the structure of the ceramic foams produced by replica. This method consists in the impregnation of a polymeric flexible template (polyurethane foam) with a ceramic suspension (slurry) containing the appropriate additives, followed by burning out organic compounds and additives and sintering the ceramic structure. In this work, ceramic foams were produced by the replica method from Al2O3 and 3% Y2O3-ZrO2. Rheological parameters of the ceramic suspensions were investigated to improve the mechanical performance of final structures. Different types and quantities of raw materials were combined in order to select the formulations for ceramic foams. The parameters that have a significant influence on the process are the binder type and the amount of solids. Significant changes on the hysteresis area of the suspensions resulted in a lower density of macrodefects in the material. Likewise, when the shear rate viscosity is enhanced, the thickness of the struts increased proportionally. Lastly, when the hysteresis area magnitude and the ceramic thickness increased, the material with higher uniformity was internally densified, and the stress concentration of the internal defects was smoothe

    Upgrade of the Glasgow photon tagging spectrometer for Mainz MAMI-C

    Full text link
    The Glasgow photon tagging spectrometer at Mainz has been upgraded so that it can be used with the 1500 MeV electron beam now available from the Mainz microtron MAMI-C. The changes made and the resulting properties of the spectrometer are discussed.Comment: 20 pages, 12 figure

    Photoproduction of pi0-mesons from nuclei

    Full text link
    Photoproduction of neutral pions from nuclei (carbon, calcium, niobium, lead) has been studied for incident photon energies from 200 MeV to 800 MeV with the TAPS detector using the Glasgow photon tagging spectrometer at the Mainz MAMI accelerator. Data were obtained for the inclusive photoproduction of neutral pions and the partial channels of quasifree single pi0, double pi0, and pi0pi+/- photoproduction. They have been analyzed in terms of the in-medium behavior of nucleon resonances and the pion - nucleus interaction. They are compared to earlier measurements from the deuteron and to the predictions of a Boltzmann-Uehling-Uhlenbeck (BUU) transport model for photon induced pion production from nuclei.Comment: 15 pages, 22 figures, accepted for publication in EPJ

    Lime and gypsum rates effects in new soybean areas in the cerrado of Matopiba, Brazil.

    Get PDF
    High rates of limestone have been increasingly utilized in newly converted areas for grain production in agricultural frontier regions to expedite the short-term correction of soil fertility, leading to compensatory yields. However, there is a lack of information about different doses of lime and gypsum for soils in the Cerrado of Matopiba, especially in the state of PiauĂ­, Brazil

    Bacterial cellulose-lactoferrin as an antimicrobial edible packaging

    Get PDF
    Bacterial cellulose (BC) films from two distinct sources (obtained by static culture with Gluconacetobacter xylinus ATCC 53582 (BC1) and from a commercial source (BC2)) were modified by bovine lactoferrin (bLF) adsorption. The functionalized films (BC+bLF) were assessed as edible antimicrobial packaging, for use in direct contact with highly perishable foods, specifically fresh sausage as a model of meat products. BC+bLF films and sausage casings were characterized regarding their water vapour permeability (WVP), mechanical properties, and bactericidal efficiency against two food pathogens, Escherichia coli and Staphylococcus aureus. Considering their edibility, an in vitro gastrointestinal tract model was used to study the changes occurring in the BC films during passage through the gastrointestinal tract. Moreover, the cytotoxicity of the BC films against 3T3 mouse embryo fibroblasts was evaluated. BC1 and BC2 showed equivalent density, WVP and maximum tensile strength. The percentage of bactericidal efficiency of BC1 and BC2 with adsorbed bLF (BC1+bLF and BC2+bLF, respectively) in the standalone films and in inoculated fresh sausages, was similar against E. coli (mean reduction 69 % in the films per se versus 94 % in the sausages) and S. aureus (mean reduction 97 % in the films per se versus 36 % in the case sausages). Moreover, the BC1+bLF and BC2+bLF films significantly hindered the specific growth rate of both bacteria. Finally, no relevant cytotoxicity against 3T3 fibroblasts was found for the films before and after the simulated digestion. BC films with adsorbed bLF may constitute an approach in the development of bio-based edible antimicrobial packaging systems.The authors would like to acknowledge Portuguese Foundation for Science and Technology (Fundação para a CiĂȘncia e Tecnologia) for the research grants: Jorge PadrĂŁo SFRH/BD/64901/2009, Sara Gonçalves SFRH/BD/63578/2009, JoĂŁo Pedro Silva SFRH/BPD/ 64958/2009, Ana Cristina Pinheiro SFRH/BPD/101181/2014. V. Sencadas thanks support from the COST Action MP1206: “Electrospun nano-fibres for bio inspired composite materials and innovative industrial applications” and MP1301: “New Generation Biomimetic and Customized Implants for Bone Engineering”. The authors would also like to thank the co-funded by the Programa Operacional Regional do Norte (ON.2 e O Novo Norte), QREN, FEDER Projects “BioHealth e Biotechnology and Bioengineering approaches to improve health quality”, Ref. NORTE-07-0124- FEDER-000027; “BioInd e Biotechnology and Bioengineering for improved Industrial and Agro-Food processes”, REF. NORTE-07- 0124-FEDER-000028; Strategic Project PEST-C/FIS/UI607/2014; Matepro eOptimizing Materials and Processes”, ref. NORTE-07- 0124-FEDER-000037; Strategic Project PEst-OE/EQB/LA0023/2013 and project ref. RECI/BBB-EBI/0179/2012 (project number FCOMP- 01-0124-FEDER-027462). Finally, the authors thank the Fundação para a CiĂȘncia e Tecnologia for the strategic funding from the UID/ BIO/04469/2013 unit

    Creating a positive casual academic identity through change and loss

    Get PDF
    Neoliberalism has significantly impacted higher education institutes across the globe by increasing the number of casual and non-continuing academic positions. Insecure employments conditions have not only affected the well-being of contingent staff, but it has also weakened the democratic, intellectual and moral standing of academic institutions. This chapter provides one practitioner’s account of the challenges of casual work, but rather than dwelling on the negativities, it outlines the potential richness of an identity based on insecurity and uncertainty. This exploration draws on the literature of retired academics and identity theory to illustrate the potential generative spaces within an undefined and incoherent identity
    • 

    corecore