Shear-dependent apparent slip on hydrophobic surfaces: The Mattress Model

Recent experiments (Zhu & Granick (2001) Phys. Rev. Lett. 87 096105) have measured a large shear dependent fluid slip at partially wetting fluid-solid surfaces. We present a simple model for such slip, motivated by the recent observations of nanobubbles on hydrophobic surfaces. The model considers the dynamic response of bubbles to change in hydrodynamic pressure due to the oscillation of a solid surface. Both the compression and diffusion of gas in the bubbles decrease the force on the oscillating surface by a ``leaking mattress'' effect, thereby creating an apparent shear-dependent slip. With bubbles similar to those observed by atomic force microscopy to date, the model is found to lead to force decreases consistent with the experimental measurements of Zhu & Granick

A scalable life cycle inventory of an automotive power electronic inverter unit—part I: design and composition

Purpose: A scalable life cycle inventory (LCI) model, which provides mass composition and manufacturing data for a power electronic inverter unit intended for controlling electric vehicle propulsion motors, was developed. The purpose is to fill existing data gaps for life cycle assessment (LCA) of electric vehicles. The model comprises new and easy-to-use data with sufficient level of detail to enable proper component scaling and more in-depth analysis of inverter units. It represents a stand-alone three-phase inverter with insulated gate bipolar transistors (IGBTs), typical in electric vehicles. This article (part I) explains the modeling of the inverter design including the principles for scaling, exemplifies results, and evaluates the models’ mass estimations.Methods: Data for the design of power electronic inverter units was compiled from material content declarations, textbooks, technology benchmarking literature, experts in industry, and product descriptions. Detailed technical documentation for two electrically and electronically complete inverter units were used as a baseline and were supplemented with data for casings, connectors, and bus bars suitable for automotive applications. Data, theory, and design rules were combined to establish a complete model, which calculates the mass of all subparts from an input of nominal power and DC system voltage. The validity of the mass estimates was evaluated through comparison with data for real automotive inverter units.Results and discussion: The results of the LCI model exemplifies how the composition of the inverter unit varies within the model range of 20–200 kW and 250–700 V, from small passenger car applications up to distribution trucks or city buses. The models’ mass estimations deviate up to 14% from the specified mass for ten examples of real inverter units. Despite the many challenges of creating a generic model of a vehicle powertrain part, including expected variability in design, all results of the model validation fall within the targeted goal for accuracy.Conclusions: The LCI model combines different principles for the scaling of subparts into one model that capture important design implications of different power demands and voltage ratings. The model can be used for a generic estimation of the mass and material composition of a power electronic inverter unit controlling electric propulsion motors, for LCA, when specific data is lacking

Perturbed CD8+ T cell TIGIT/CD226/PVR axis despite early initiation of antiretroviral treatment in HIV infected individuals.

HIV-specific CD8+ T cells demonstrate an exhausted phenotype associated with increased expression of inhibitory receptors, decreased functional capacity, and a skewed transcriptional profile, which are only partially restored by antiretroviral treatment (ART). Expression levels of the inhibitory receptor, T cell immunoglobulin and ITIM domain (TIGIT), the co-stimulatory receptor CD226 and their ligand PVR are altered in viral infections and cancer. However, the extent to which the TIGIT/CD226/PVR-axis is affected by HIV-infection has not been characterized. Here, we report that TIGIT expression increased over time despite early initiation of ART. HIV-specific CD8+ T cells were almost exclusively TIGIT+, had an inverse expression of the transcription factors T-bet and Eomes and co-expressed PD-1, CD160 and 2B4. HIV-specific TIGIThi cells were negatively correlated with polyfunctionality and displayed a diminished expression of CD226. Furthermore, expression of PVR was increased on CD4+ T cells, especially T follicular helper (Tfh) cells, in HIV-infected lymph nodes. These results depict a skewing of the TIGIT/CD226 axis from CD226 co-stimulation towards TIGIT-mediated inhibition of CD8+ T cells, despite early ART. These findings highlight the importance of the TIGIT/CD226/PVR axis as an immune checkpoint barrier that could hinder future "cure" strategies requiring potent HIV-specific CD8+ T cells

Falls Predict Fractures Independently of FRAX Probability: A Meta-Analysis of the Osteoporotic Fractures in Men (MrOS) Study

Although prior falls are a well-established predictor of future fracture, there is currently limited evidence regarding the specific value of falls history in fracture risk assessment relative to that of other clinical risk factors and bone mineral density (BMD) measurement. We therefore investigated, across the three Osteoporotic Fractures in Men (MrOS) Study cohorts, whether past falls predicted future fracture independently of FRAX and whether these associations varied with age and follow-up time. Elderly men were recruited from MrOS Sweden, Hong Kong, and USA. Baseline data included falls history (over the preceding 12 months), clinical risk factors, BMD at femoral neck, and calculated FRAX probabilities. An extension of Poisson regression was used to investigate the associations between falls, FRAX probability, and incident fracture, adjusting for age, time since baseline, and cohort in base models; further models were used to investigate interactions with age and follow-up time. Random-effects meta-analysis was used to synthesize the individual country associations. Information on falls and FRAX probability was available for 4365 men in USA (mean age 73.5 years; mean follow-up 10.8 years), 1823 men in Sweden (mean age 75.4 years; mean follow-up 8.7 years), and 1669 men in Hong Kong (mean age 72.4 years; mean follow-up 9.8 years). Rates of past falls were similar at 20%, 16%, and 15%, respectively. Across all cohorts, past falls predicted incident fracture at any site (hazard ratio [HR] = 1.69; 95% confidence interval [CI] 1.49, 1.90), major osteoporotic fracture (MOF) (HR = 1.56; 95% CI 1.33, 1.83), and hip fracture (HR = 1.61; 95% CI 1.27, 2.05). Relationships between past falls and incident fracture remained robust after adjustment for FRAX probability: adjusted HR (95% CI) any fracture: 1.63 (1.45, 1.83); MOF: 1.51 (1.32, 1.73); and hip: 1.54 (1.21, 1.95). In conclusion, past falls predicted incident fracture independently of FRAX probability, confirming the potential value of falls history in fracture risk assessment. © 2017 The Authors. Journal of Bone and Mineral Research Published by Wiley Periodicals Inc

Regulation of CD1 Antigen-presenting Complex Stability

For major histocompatibility complex class I and II molecules, the binding of specific peptide antigens is essential for assembly and trafficking and is at the center of their quality control mechanism. However, the role of lipid antigen binding in stabilization and quality control of CD1 heavy chain (HC).beta(2)-microglobulin (beta(2)m) complexes is unclear. Furthermore, the distinct trafficking and loading routes of CD1 proteins take them from mildly acidic pH in early endososmal compartments (pH 6.0) to markedly acidic pH in lysosomes (pH 5.0) and back to neutral pH of the cell surface (pH 7.4). Here, we present evidence that the stability of each CD1 HC.beta(2)m complex is determined by the distinct pH optima identical to that of the intracellular compartments in which each CD1 isoform resides. Although stable at acidic endosomal pH, complexes are only stable at cell surface pH 7.4 when bound to specific lipid antigens. The proposed model outlines a quality control program that allows lipid exchange at low endosomal pH without dissociation of the CD1 HC.beta(2)m complex and then stabilizes the antigen-loaded complex at neutral pH at the cell surface

UV-induced ligand exchange in MHC class I protein crystals

High-throughput structure determination of protein−ligand complexes is central in drug development and structural proteomics. To facilitate such high-throughput structure determination we designed an induced replacement strategy. Crystals of a protein complex bound to a photosensitive ligand are exposed to UV light, inducing the departure of the bound ligand, allowing a new ligand to soak in. We exemplify the approach for a class of protein complexes that is especially recalcitrant to high-throughput strategies: the MHC class I proteins. We developed a UV-sensitive, “conditional”, peptide ligand whose UV-induced cleavage in the crystals leads to the exchange of the low-affinity lytic fragments for full-length peptides introduced in the crystallant solution. This “in crystallo” exchange is monitored by the loss of seleno-methionine anomalous diffraction signal of the conditional peptide compared to the signal of labeled MHC β2m subunit. This method has the potential to facilitate high-throughput crystallography in various protein families

Class I major histocompatibility complexes loaded by a periodate trigger

Class I major histocompatibility complexes (MHCs) present peptide ligands on the cell surface for recognition by appropriate cytotoxic T cells. The unstable nature of unliganded MHC necessitates the production of recombinant class I complexes through in vitro refolding reactions in the presence of an added excess of peptides. This strategy is not amenable to high-throughput production of vast collections of class I complexes. To address this issue, we recently designed photocaged MHC ligands that can be cleaved by a UV light trigger in the MHC bound state under conditions that do not affect the integrity of the MHC structure. The results obtained with photocaged MHC ligands demonstrate that conditional MHC ligands can form a generally applicable concept for the creation of defined peptide−MHCs. However, the use of UV exposure to mediate ligand exchange is unsuited for a number of applications, due to the lack of UV penetration through cell culture systems and due to the transfer of heat upon UV irradiation, which can induce evaporation. To overcome these limitations, here, we provide proof-of-concept for the generation of defined peptide−MHCs by chemical trigger-induced ligand exchange. The crystal structure of the MHC with the novel chemosensitive ligand showcases that the ligand occupies the expected binding site, in a conformation where the hydroxyl groups should be reactive to periodate. We proceed to validate this technology by producing peptide−MHCs that can be used for T cell detection. The methodology that we describe here should allow loading of MHCs with defined peptides in cell culture devices, thereby permitting antigen-specific T cell expansion and purification for cell therapy. In addition, this technology will be useful to develop miniaturized assay systems for performing high-throughput screens for natural and unnatural MHC ligands