Jet array impingement flow distributions and heat transfer characteristics. Effects of initial crossflow and nonuniform array geometry

Two-dimensional arrays of circular air jets impinging on a heat transfer surface parallel to the jet orifice plate are considered. The jet flow, after impingement, is constrained to exit in a single direction along the channel formed by the jet orifice plate and the heat transfer surface. The configurations considered are intended to model those of interest in current and contemplated gas turbine airfoil midchord cooling applications. The effects of an initial crossflow which approaches the array through an upstream extension of the channel are considered. Flow distributions as well as heat transfer coefficients and adiabatic wall temperatures resolved to one streamwise hole spacing were measured as a function of the initial crossflow rate and temperature relative to the jet flow rate and temperature. Both Nusselt number profiles and dimensionless adiabatic wall temperature (effectiveness) profiles are presented and discussed. Special test results which show a significant reduction of jet orifice discharge coefficients owing to the effect of a confined crossflow are also presented, along with a flow distribution model which incorporates those effects. A nonuniform array flow distribution model is developed and validated

Clinical impact of double protease inhibitor boosting with Lopinavir/Ritonavir and Amprenavir as part of salvage antiretroviral therapy

Purpose: Double protease inhibitor (PI) boosting is being explored as a new strategy in salvage antiretroviral (ARV) therapy. However, if a negative drug interaction leads to decreased drug levels of either or both PIs, double PI boosting could lead to decreased virologic response. A negative drug interaction has been described between amprenavir (APV) and lopinavir/ritonavir (LPV/r). This observational cohort study assessed the virologic impact of the addition of APV to a salvage ARV regimen, which also contains LPV/r, compared to a regimen containing LPV/r alone. Method: Patients initiated on a salvage ARV regimen that included LPV/r obtained from the expanded access program in Toronto, Canada, were evaluated. APV (600-1,200 mg bid) was added at the discretion of the treating physician. Results: Using multivariate Cox proportional hazards models, we found that the addition of APV to a LPV/r-containing salvage regimen was not significantly associated with time to virologic suppression (< 50 copies/mL; adjusted hazard ratio [HR] = 0.75, p = .12) or with time to virologic rebound (adjusted HR = 1.46, p = .34). Those patients who received higher doses of APV had an increased chance of virologic suppression (p = .03). In a subset of 27 patients, the median LPV Ctrough was significantly lower in patients receiving APV (p = .04), and the median APV Ctrough was reduced compared to reported controls. Conclusion: Our data do not support an additional benefit in virologic reduction of double boosting with APV and LPV/r relative to LPV/r alone in salvage ARV therapy. Our study's limitations include its retrospective nature and the imbalance between the two groups potentially confounding the results. Although these factors were adjusted for in the multivariate analysis, a prospective randomized controlled trial is warranted to confirm our findings

Data warehouses-TOLAP-decision making

Data warehouses (DWH) have been established as the core of decision support systems. On top of a DWH, different applications can be realised with regard to conventional reporting. On line Analytical Processing (OLAP) has reached the maturity as an interactive and explorative way of analysing DWH data. However DWH are mostly organised as snapshot databases. For this reason important tasks like "how many times have products of a specific brand been sold in the "past?" cannot be answered successfully - in order to control the success of reshuffling the product range it is necessary to compare the sales of "old" and "new" products. The same applies in cases where the seasonality aspect for a particular range of products has to be answered. On the other hand, temporal databases allow a valid time to be assigned to data. In this manner, a past state can be reconstructed during retrieval. In this paper, we address the integration of DWH and OLAP with temporal database semantics

Production of large-particle-size monodisperse latexes

The research program achieved two objectives: (1) it has refined and extended the experimental techniques for preparing monodisperse latexes in quantity on the ground up to a particle diameter of 10 microns; and (2) it has demonstrated that a microgravity environment can be used to grow monodisperse latexes to larger sizes, where the limitations in size have yet to be defined. The experimental development of the monodisperse latex reactor (MLR) and the seeded emulsion polymerizations carried out in the laboratory prototype of the flight hardware, as a function of the operational parameters is discussed. The emphasis is directed towards the measurement, interpretation, and modeling of the kinetics of seeded emulsion polymerization and successive seeded emulsion polymerization. The recipe development of seeded emulsion polymerization as a function of particle size is discussed. The equilibrium swelling of latex particles with monomers was investigated both theoretically and experimentally. Extensive studies are reported on both the type and concentration of initiators, surfactants, and inhibitors, which eventually led to the development of the flight recipes. The experimental results of the flight experiments are discussed, as well as the experimental development of inhibition of seeded emulsion polymerization in terms of time of inhibition and the effect of inhibitors on the kinetics of polymerization

The first products made in space: Monodisperse latex particles

The preparation of large particle size 3 to 30 micrometer monodisperse latexes in space confirmed that original rationale unequivocally. The flight polymerizations formed negligible amounts of coagulum as compared to increasing amounts for the ground-based polymerizations. The number of offsize large particles in the flight latexes was smaller than in the ground-based latexes. The particle size distribution broadened and more larger offsize particles were formed when the polymerizations of the partially converted STS-4 latexes were completed on Earth. Polymerization in space also showed other unanticipated advantages. The flight latexes had narrower particle size distributions than the ground-based latexes. The particles of the flight latexes were more perfect spheres than those of the ground-based latexes. The superior uniformity of the flight latexes was confirmed by the National Bureau of Standards acceptance of the 10 micrometer STS-6 latex and the 30 micrometer STS-11 latexes as Standard Reference Materials, the first products made in space for sale on Earth. The polymerization rates in space were the same as those on Earth within experimental error. Further development of the ground-based polymerization recipes gave monodisperse particles as large as 100 micrometer with tolerable levels of coagulum, but their uniformity was significantly poorer than the flight latexes. Careful control of the polymerization parameters gave uniform nonspherical particles: symmetrical and asymmetrical doublets, ellipsoids, egg-shaped, ice cream cone-shaped, and popcorn-shaped particles

Acoustic cues to tonal contrasts in Mandarin: Implications for cochlear implants

The present study systematically manipulated three acoustic cues-fundamental frequency (f0), amplitude envelope, and duration-to investigate their contributions to tonal contrasts in Mandarin. Simplified stimuli with all possible combinations of these three cues were presented for identification to eight normal-hearing listeners, all native speakers of Mandarin from Taiwan. The f0 information was conveyed either by an f0-controlled sawtooth carrier or a modulated noise so as to compare the performance achievable by a clear indication of voice f0 and what is possible with purely temporal coding of f0. Tone recognition performance with explicit f0 was much better than that with any combination of other acoustic cues (consistently greater than 90% correct compared to 33%-65%; chance is 25%). In the absence of explicit f0, the temporal coding of f0 and amplitude envelope both contributed somewhat to tone recognition, while duration had only a marginal effect. Performance based on these secondary cues varied greatly across listeners. These results explain the relatively poor perception of tone in cochlear implant users, given that cochlear implants currently provide only weak cues to f0, so that users must rely upon the purely temporal (and secondary) features for the perception of tone. (c) 2008 Acoustical Society of America

Randomized trial of conventional transseptal needle versus radiofrequency energy needle puncture for left atrial access (the TRAVERSE-LA study).

BackgroundTransseptal puncture is a critical step in achieving left atrial (LA) access for a variety of cardiac procedures. Although the mechanical Brockenbrough needle has historically been used for this procedure, a needle employing radiofrequency (RF) energy has more recently been approved for clinical use. We sought to investigate the comparative effectiveness of an RF versus conventional needle for transseptal LA access.Methods and resultsIn this prospective, single-blinded, controlled trial, 72 patients were randomized in a 1:1 fashion to an RF versus conventional (BRK-1) transseptal needle. In an intention-to-treat analysis, the primary outcome was time required for transseptal LA access. Secondary outcomes included failure of the assigned needle, visible plastic dilator shavings from needle introduction, and any procedural complication. The median transseptal puncture time was 68% shorter using the RF needle compared with the conventional needle (2.3 minutes [interquartile range {IQR}, 1.7 to 3.8 minutes] versus 7.3 minutes [IQR, 2.7 to 14.1 minutes], P = 0.005). Failure to achieve transseptal LA access with the assigned needle was less common using the RF versus conventional needle (0/36 [0%] versus 10/36 [27.8%], P &lt; 0.001). Plastic shavings were grossly visible after needle advancement through the dilator and sheath in 0 (0%) RF needle cases and 12 (33.3%) conventional needle cases (P &lt; 0.001). There were no differences in procedural complications (1/36 [2.8%] versus 1/36 [2.8%]).ConclusionsUse of an RF needle resulted in shorter time to transseptal LA access, less failure in achieving transseptal LA access, and fewer visible plastic shavings

Serum Differentially Modulates the Clonal Growth and Differentiation of Cultured Limbal and Corneal Epithelium

Purpose. The stem cell-containing limbal epithelium is in proximity with highly vascularized tissue, as opposed to the transient amplifying cell-containing corneal basal epithelium, which resides on top of avascular corneal stroma. We therefore speculate that limbal stem cells are preferentially under the modulation of serum-derived factors. Methods. Using a previously reported serum-free, chemically defined culture system for ocular surface epithelium, a culture condition primarily supporting transient amplifying cells of both corneal and limbal epithelia, we compared the clonal growth measured by colony-forming efficiency (CFE), colony size, and BrdU labeling, as well as colony differentiation measured by colony morphology and immunofluorescence staining, with the monoclonal antibody AE-5 against keratin K3 when fetal bovine serum (FBS) was added at different concentrations. Results. The addition of 1% FBS decreased CFE and colony size in peripheral corneal cultures but had no effect in limbal cultures. Both cultures showed no obvious difference in colony morphology or BrdU labeling and AE-5 staining. In contrast, at 10% or 20% FBS, CFE and colony size increased in limbal cultures, but dose dependently decreased in peripheral corneal cultures. The presence of a unique subpopulation of progenitor cells in limbal cultures different from transient amplifying cells in corneal cultures was further supported by the emergence of a higher proportion of a unique type (B) colonies in limbal cultures that had high BrdU labeling and heterogeneous or negative AE-5 staining, indicative of their being in a proliferating, undifferentiated state. These colonies showed continuous growth in late cultures and could be passaged into serum-free medium. Conclusio