149,721 research outputs found
Intensification in pastoralist cereal use coincides with the expansion of trans-regional networks in the Eurasian Steppe
The pace of transmission of domesticated cereals, including millet from China as well as wheat and barley from southwest Asia, throughout the vast pastoralist landscapes of the Eurasian Steppe (ES) is unclear. The rich monumental record of the ES preserves abundant human remains that provide a temporally deep and spatially broad record of pastoralist dietary intake. Calibration of human δ13C and δ15N values against isotope ratios derived from co-occurring livestock distinguish pastoralist consumption of millet from the products of livestock and, in some regions, identify a considerable reliance by pastoralists on C3 crops. We suggest that the adoption of millet was initially sporadic and consumed at low intensities during the Bronze Age, with the low-level consumption of millet possibly taking place in the Minusinsk Basin perhaps as early as the late third millennium cal BC. Starting in the mid-second millennium cal BC, millet consumption intensified dramatically throughout the ES with the exception of both the Mongolian steppe where millet uptake was strongly delayed until the end of first millennium cal BC and the Trans-Urals where instead barley or wheat gained dietary prominence. The emergence of complex, trans-regional political networks likely facilitated the rapid transfer of cultivars across the steppe during the transition to the Iron Age
Measuring the Effects of Artificial Viscosity in SPH Simulations of Rotating Fluid Flows
A commonly cited drawback of SPH is the introduction of spurious shear
viscosity by the artificial viscosity term in situations involving rotation.
Existing approaches for quantifying its effect include approximate analytic
formulae and disc-averaged be- haviour in specific ring-spreading simulations,
based on the kinematic effects produced by the artificial viscosity. These
methods have disadvantages, in that they typically are applicable to a very
small range of physical scenarios, have a large number of simplifying
assumptions, and often are tied to specific SPH formulations which do not
include corrective (e.g., Balsara) or time-dependent viscosity terms. In this
study we have developed a simple, generally applicable and practical technique
for evaluating the local effect of artificial viscosity directly from the
creation of specific entropy for each SPH particle. This local approach is
simple and quick to implement, and it al- lows a detailed characterization of
viscous effects as a function of position. Several advantages of this method
are discussed, including its ease in evaluation, its greater accuracy and its
broad applicability. In order to compare this new method with ex- isting ones,
simple disc flow examples are used. Even in these basic cases, the very roughly
approximate nature of the previous methods is shown. Our local method pro-
vides a detailed description of the effects of the artificial viscosity
throughout the disc, even for extended examples which implement Balsara
corrections. As a further use of this approach, explicit dependencies of the
effective viscosity in terms of SPH and flow parameters are estimated from the
example cases. In an appendix, a method for the initial placement of SPH
particles is discussed which is very effective in reducing numerical
fluctuations.Comment: 15 pages, 9 figures, resubmitted to MNRA
Performance of thermal barrier coatings in high heat flux environments
Thermal barrier coatings were exposed to the high temperature and high heat flux produced by a 30 kW plasma torch. Analysis of the specimen heating rates indicates that the temperature drop across the thickness of the 0.038 cm ceramic layer was about 1100 C after 0.5 sec in the flame. An as-sprayed ZrO2-8%Y2O3 specimens survived 3000 of the 0.5 sec cycles with failing. Surface spalling was observed when 2.5 sec cycles were employed but this was attributed to uneven heating caused by surface roughness. This surface spalling was prevented by smoothing the surface with silicon carbide paper or by laser glazing. A coated specimen with no surface modification but which was heat treated in argon also did not surface spall. Heat treatment in air led to spalling in as early as 2 cycle from heating stresses. Failures at edges were investigated and shown to be a minor source of concern. Ceramic coatings formed from ZrO2-12%Y2O3 or ZrO2-20%Y2O3 were shown to be unsuited for use under the high heat flux conditions of this study
- …