187 research outputs found
Design of an antifungal surface embedding liposomal Amphotericin b through a mussel adhesive-inspired coating strategy
Microbial colonisation of urinary catheters remains a serious problem for medicine as it often leads to biofilm formation and infection. Among the approaches reported to deal with this problem, surfaces functionalization to render them with antimicrobial characteristics, comprises the most promising one. Most of these strategies, however, are designed to target bacterial biofilms, while fungal biofilms are much less taken into account. In real-life settings, fungi will be inevitably found in consortium with bacteria, especially in the field of biomaterials. The development of antifungal coating strategies to be combined with antibacterial approaches will be pivotal for the fight of biomaterial-associated infections. The main goal of the present study was, therefore, to engineer an effective strategy for the immobilization of liposomal amphotericin B (LAmB) on polydimethylsiloxane (PDMS) surfaces to prevent Candida albicans colonization. Immobilization was performed using a two-step mussel-inspired coating strategy, in which PDMS are first immersed in dopamine solution. Its self-polymerization leads to the deposition of a thin adherent film, called polydopamine (pDA), which allowed the incorporation of LAmB, afterwards. Different concentrations of LAmB were screened in order to obtain a contact-killing surface with no release of LAmB. Surface characterization confirmed the polymerization of dopamine and further functionalization with LAmB yielded surfaces with less roughness and more hydrophilic features. The proposed coating strategy rendered the surfaces of PDMS with the ability to prevent the attachment of Candida albicans and kill the adherent cells, without toxicity towards mammalian cells. Overall results showed that LAmB immobilization on a surface retained its antifungal activity and reduced toxicity, holding therefore a great potential to be applied for the design of urinary catheters. Since the sessile communities commonly found associated to these devices exhibit a polymicrobial nature, the next challenge will be to co-immobilize LAmB with antibacterial agents to prevent the establishment of catheter urinary-associated infections.This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2019 unit and BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund under the scope of Norte2020 - Programa Operacional Regional do Norte. The authors also acknowledge the support, through the Programa Operacional Competitividade e Internacionalizacao (COMPETE2020) and by national funds, through the Portuguese Foundation for Science and Technology (FCT), of the POLY-PrevEnTT project (PTDC/BTM-SAL/29841/2017-POCI-01-0145-FEDER-029841).info:eu-repo/semantics/publishedVersio
Lung-deposited dose of particulate matter from residential exposure to smoke from wood burning
Residential settings are of utmost importance for human exposure, as it is where people spend most of their time. Residential wood combustion is a widespread practice known as a source of indoor particulate matter (PM). Nevertheless, research on the risks of exposure associated with this source is scarce, and a better understanding of respiratory deposition of smoke particles is needed. The dosimetry model ExDoM2 was applied to determine the deposited dose of inhalable particulate matter (PM10) from residential biomass combustion in the human respiratory tract (HRT) of adults and children. The dose was estimated using PM10 exposure concentrations obtained from a field campaign carried out in two households during the operation of an open fireplace and a woodstove. Simultaneously, PM10 levels were monitored outside to investigate the outdoor dose in a rural area strongly impacted by biomass burning emissions. Indoors, the 8-h average PM10 concentrations ranged from 88.3 to 489 ÎŒg m-3 and from 69.4 to 122 ÎŒg m-3 for the operation of the fireplace and the woodstove, respectively, while outdoor average PM10 concentrations ranged from 17.3 to 94.2 ÎŒg m-3. The highest amount of the deposited particles was recorded in the extrathoracic region (68-79%), whereas the deposition was much lower in the tracheobronchial tree (5-6%) and alveolar-interstitial region (16-21%). The total dose received while using the fireplace was more than twofold the one received in the room with a woodstove and more than 10 times higher than in the absence of the source. Overall, indoor doses were higher than the ones received by a subject exposed outdoors, especially at the alveolar-interstitial region. After 24 h of exposure, it was estimated that approximately 35 to 37% of the particles deposited in the HRT were transferred to the gastrointestinal tract, while approximately 2.0-2.5% were absorbed into the blood. The results from exposure and dose of indoor particles gathered in this work suggest that homeowners should be encouraged to upgrade the wood burning technology to reduce the PM levels inside their residences. This study also provides biologically relevant results on the lung deposition of particles from residential biomass burning that can be used as a reference for future research.publishe
FormaldeĂdo em escolas: uma revisĂŁo
Formaldehyde has been classified as a probable human carcinogen. Indoor air quality measurements carried out worldwide in schools indicate that levels may be of concern. This paper provides an overview of emission sources, properties and methods for quantification of formaldehyde. Quantitative information from studies performed in school environments was compiled and a comprehensive picture of the causal relationships between pollutant exposures and childrenâs health given. Mitigation actions to reduce formaldehyde levels and its adverse impacts in school buildings are recommended.publishe
Experimental study of a double-diffusive system: application to solar ponds
A salt gradient solar pond is an artificial device used to collect and store solar thermal energy. A non-convective zone, in the middle of the solar pond, reduces thermal losses and allows a significant rise of temperature in the saltier lower zone where the solar thermal energy is stored. The non-convective zone, also named gradient zone, is characterized by a salinity gradient that increase the density with depth promoting the stability of this layer. The absorption of solar radiation in the pond creates a destabilizing temperature gradient in the non-convective zone that contradicts the density gradient. The different molecular diffusivities of heat and salt and the opposing effects on the vertical density distribution of the two gradients can lead to double-diffusive convection phenomena. In this context, a double-diffusive system has been studied experimentally in laboratory by heating a stratified salt layer from below. The instabilities caused by the destabilizing temperature gradients lead to the formation of convective zones separated from purely diffusive zone by thin interfaces. The main goals of this work are the study of the evolution of the double-diffusive layer and the analysis of the behaviour of the diffusive interface near conditions for which instabilities appear
Characteristics of ash and particle emissions during bubbling fluidised bed combustion of three types of residual forest biomass
Combustion of residual forest biomass (RFB) derived from eucalypt (Eucalyptus globulus), pine (Pinus pinaster) and golden wattle (Acacia longifolia) was evaluated in a pilot-scale bubbling fluidised bed reactor (BFBR). During the combustion experiments, monitoring of temperature, pressure and exhaust gas composition has been made. Ash samples were collected at several locations along the furnace and flue gas treatment devices (cyclone and bag filter) after each combustion experiment and were analysed for their unburnt carbon content and chemical composition. Total suspended particles (TSP) in the combustion flue gas were evaluated at the inlet and outlet of cyclone and baghouse filter and further analysed for organic and elemental carbon, carbonates and 57 chemical elements. High particulate matter collection efficiencies in the range of 94-99% were observed for the baghouse, while removal rates of only 1.4-17% were registered for the cyclone. Due to the sand bed, Si was the major element in bottom ashes. Fly ashes, in particular those from eucalypt combustion, were especially rich in CaO, followed by relevant amounts of SiO2, MgO and K2O. Ash characteristics varied among experiments, showing that their inorganic composition strongly depends on both the biomass composition and combustion conditions. Inorganic constituents accounted for TSP mass fractions up to 40Â wt%. Elemental carbon, organic matter and carbonates contributed to TSP mass fractions in the ranges 0.58-44%, 0.79-78% and 0.01-1.7%, respectively.publishe
Effect of industrial and domestic ash from biomass combustion, and spent coffee grounds, on soil fertility and plant growth: experiments at field conditions
An experimental study was conducted at field conditions in order to evaluate the effect of application of ash from biomass combustion on some soil fertility characteristics and plant growth. Application of 7.5 Mg ha-1 industrial fly ash (IA), domestic ash (DA), and a 50:50 mix of domestic ash (DA) and spent coffee grounds (SCG) was made in different soil parcels. Lolium perenne seeds were sown and the grown biomass was harvested and quantified after 60 days. Soil samples from each parcel were also collected after that period and characterized. Both soil and grown biomass samples were analyzed for Ca, Mg, Na, K, P, Fe, Mn, Zn, and Al contents. Soil pH was determined before and after amendment. All applications rose significantly soil pH. Domestic ash, whether combined with coffee grounds or not, proved to be efficient at supplying available macronutrients Ca, Mg, K, and P to the soil and also reducing availability of Al (more than industrial ash). However, it inhibited plant growth, even more when combined with spent coffee grounds. As regards to elemental abundance in plant tissue, both domestic ash treatments reduced Ca and enhanced Al contents, unlike industrial ash, which proved less harmful for the load applied in the soil. Hence, it was possible to conclude that application load should be a limiting factor for this management option for the studied materials.publishe
Characterisation of Airborne Particulate Matter in Different European Subway Systems
Air quality sampling campaigns in three European subway systems (Barcelona, Athens and Oporto) were conducted in order to characterise particulate matter (PM) to better understand the main factors controlling it. PM mass concentrations varied among the European subway platforms, and also within the same underground system, this being mainly associated to differences in the design of the stations and tunnels, system age, train frequency, ventilation and airâconditioning systems, commuter\u27s density, rails geometry and outdoor air quality. PM concentrations displayed clear diurnal patterns, depending largely on the operation and frequency of the trains and the ventilation system. Chemically, subway PM2.5 on the platforms consisted of iron, carbonaceous material, crustal matter, secondary inorganic compounds, insoluble sulphate, halite and trace elements. Fe was the most abundant element, accounting for 19â46% of the bulk PM2.5, which is generated mainly from mechanical wear at railâwheelâbrake interfaces. A source apportionment analysis allowed the identification of outdoor (sea salt, fuelâoil combustion and secondary aerosol) and subway sources on platforms. The use of airâconditioning inside the trains was an effective approach to reduce exposure concentrations, being more efficient removing coarser particles. PM concentrations inside the trains were greatly affected by the surrounding (i.e. platforms and tunnels) air quality conditions
Source apportionment of PM2.5 before and after COVID-19 lockdown in an urban-industrial area of the Lisbon metropolitan area, Portugal
The lockdowns held due to the COVID-19 pandemic conducted to changes in air quality. This study aimed to understand the variability of PM2.5 levels and composition in an urban-industrial area of the Lisbon Metropolitan Area and to identify the contribution of the different sources. The composition of PM2.5 was assessed for 24 elements (by PIXE), secondary inorganic ions and black carbon. The PM2.5 mean concentration for the period (December 2019 to November 2020) was 13 ± 11 ÎŒg.mâ3. The most abundant species in PM2.5 were BC (19.9%), SO42â (15.4%), NO3â (11.6%) and NH4+ (5.3%). The impact of the restrictions imposed by the COVID-19 pandemic on the PM levels was found by comparison with the previous six years. The concentrations of all the PM2.5 components, except Al, Ba, Ca, Si and SO42â, were significantly higher in the winter/pre-confinement than in post-confinement period. A total of seven sources were identified by Positive Matrix Factorisation (PMF): soil, secondary sulphate, fuel-oil combustion, sea, vehicle non-exhaust, vehicle exhaust, and industry. Sources were greatly influenced by the restrictions imposed by the COVID-19 pandemic, with vehicle exhaust showing the sharpest decrease. Secondary sulphate predominated in summer/post-confinement. PM2.5 levels and composition also varied with the types of air mass trajectories.info:eu-repo/semantics/publishedVersio
Source apportionment of PM2.5 in the pre-pandemic versus pandemic period in an area near Lisbon: lessons for air quality management
Trabalho apresentado em European Aerosol Conference - EAC2023, 3-8 setembro 2023, MĂĄlaga, EspanhaN/
- âŠ