37 research outputs found
Summary report for a hydrogen sensor workshop: Hydrogen safety sensors and their use in applications with hydrogen as an alternative fuel
On May 10, 2017, a Hydrogen Sensor Workshop was held in Brussels, Belgium. The workshop was jointly organised by the sensor test laboratories at the Joint Research Centre (Petten, Netherlands) and the National Renewable Energy Laboratory (Golden, Colorado, United States), with assistance from the Fuel Cell and Hydrogen Joint Undertaking. The purpose of the workshop was to bring together stakeholders in the hydrogen community with an interest in hydrogen sensors, with a special focus on the ability of existing hydrogen sensor technology to meet end-user needs in applications for hydrogen as an alternative fuel. Participants included sensor manufacturers, end-users, and experts from sensor test laboratories. The main performance gaps hindering the deployment of hydrogen sensors were discussed. From the end-user perspective, numerous gaps were identified in which existing sensor performance capability does not fully meet their needs. For most safety applications, the metrological performance of current hydrogen sensors is adequate, but improvements are still needed. The most critical metrological gap remains sensor lifetime, which includes both the functionality (i.e., does the sensor work) of the sensor and long-term signal stability (i.e., does the sensor need to be recalibrated). Also, for many applications, such as process control and critical safety scenarios, faster response times and improved sensor accuracy are necessary. Maintenance and calibration requirements were identified as a key issue. Certification requirements of hydrogen safety sensors were also identified as a critical barrier. Sensor manufacturers noted that the cumbersome certification requirements can significantly impact sensor cost, especially for a limited market. The complex certification requirements also impacted end-users who often found that sensors with required listings are not available. Simplifying and harmonizing certification requirements were identified as a critical topic requiring further attention and support. In terms of standardisation, the performance requirements for sensors for automotive applications were also mentioned as a critical gap,JRC.C.1-Energy Storag
Paradoxical antidepressant effects of alcohol are related to acid sphingomyelinase and its control of sphingolipid homeostasis
Alcohol is a widely consumed drug that can lead to addiction and severe brain damage. However, alcohol is also used as self-medication for psychiatric problems, such as depression, frequently resulting in depression-alcoholism comorbidity. Here, we identify the first molecular mechanism for alcohol use with the goal to self-medicate and ameliorate the behavioral symptoms of a genetically induced innate depression. An induced over-expression of acid sphingomyelinase (ASM), as was observed in depressed patients, enhanced the consumption of alcohol in a mouse model of depression. ASM hyperactivity facilitates the establishment of the conditioned behavioral effects of alcohol, and thus drug memories. Opposite effects on drinking and alcohol reward learning were observed in animals with reduced ASM function. Importantly, free-choice alcohol drinking—but not forced alcohol exposure—reduces depression-like behavior selectively in depressed animals through the normalization of brain ASM activity. No such effects were observed in normal mice. ASM hyperactivity caused sphingolipid and subsequent monoamine transmitter hypo-activity in the brain. Free-choice alcohol drinking restores nucleus accumbens sphingolipid- and monoamine homeostasis selectively in depressed mice. A gene expression analysis suggested strong control of ASM on the expression of genes related to the regulation of pH, ion transmembrane transport, behavioral fear response, neuroprotection and neuropeptide signaling pathways. These findings suggest that the paradoxical antidepressant effects of alcohol in depressed organisms are mediated by ASM and its control of sphingolipid homeostasis. Both emerge as a new treatment target specifically for depression-induced alcoholism. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s00401-016-1658-6) contains supplementary material, which is available to authorized users
Influence of preoperative nucleus pulposus status and radiculopathy on outcomes in mono-segmental lumbar total disc replacement: results from a nationwide registry
Background: Currently, herniated nucleus pulposus (HNP) with radiculopathy and other preconditions are regarded as relative or absolute contraindications for lumbar total disc replacement (TDR). In Switzerland it is left to the surgeon's discretion when to operate. The present study is based on the dataset of SWISSspine, a governmentally mandated health technology assessment registry. We hypothesized that preoperative nucleus pulposus status and presence or absence of radiculopathy has an influence on clinical outcomes in patients treated with mono-segmental lumbar TDR. Methods. Between March 2005 and April 2009, 416 patients underwent mono-segmental lumbar TDR, which was documented in a prospective observational multicenter mode. The data collection consisted of perioperative and follow-up data (physician based) and clinical outcomes (NASS, EQ-5D). Patients were divided into four groups according to their preoperative status: 1) group degenerative disc disease ("DDD"): 160 patients without HNP and no radiculopathy, classic precondition for TDR; 2) group "HNP-No radiculopathy": 68 patients with HNP but without radiculopathy; 3) group "Stenosis": 73 patients without HNP but with radiculopathy, and 4) group "HNP-Radiculopathy": 132 patients with HNP and radiculopathy. The groups were compared regarding preoperative patient characteristics and pre- and postoperative VAS and EQ-5D scores using general linear modeling. Results: Demographics in all four groups were comparable. Regarding the improvement of quality of life (EQ-5D) there were no differences across the four groups. For the two main groups DDD and HNP-Radiculopathy no differences were found in the adjusted postoperative back- and leg pain alleviation levels, in the stenosis group back- and leg pain relief were lower. Conclusions: Despite higher preoperative leg pain levels, outcomes in lumbar TDR patients with HNP and radiculopathy were similar to outcomes in patients with the classic indication; this because patients with higher preoperative leg pain levels benefit from a relatively greater leg pain alleviation. The group with absence of HNP but presence of radiculopathy showed considerably less benefits from the operation, which is probably related to ongoing degenerative processes of the posterior segmental structures. This observational multicenter study suggests that the diagnoses HNP and radiculopathy, combined or alone, may not have to be considered as absolute or relative contraindications for mono-segmental lumbar TDR anymore, whereas patients without HNP but with radiculopathy seem to be suboptimal candidates for the procedure. © 2011 Zweig et al; licensee BioMed Central Ltd
Test methodologies for hydrogen sensor performance assessment: Chamber vs. flow through test apparatus
Certification of hydrogen sensors to standards often prescribes using large-volume test chambers. However, feedback from stakeholders such as sensor manufacturers and end-users indicate that chamber test methods are often viewed as too slow and expensive for routine assessment. Flow through test methods potentially are an efficient, cost-effective alternative for sensor performance assessment. A large number of sensors can be simultaneously tested, in series or in parallel, with an appropriate flow through test fixture. The recent development of sensors with response times of less than 1s mandates improvements in equipment and methodology to properly capture the performance of this new generation of fast sensors; flow methods are a viable approach for accurate response and recovery time determinations, but there are potential drawbacks. According to ISO 26142, flow through test methods may not properly simulate ambient applications. In chamber test methods, gas transport to the sensor can be dominated by diffusion which is viewed by some users as mimicking deployment in rooms and other confined spaces. Alternatively, in flow through methods, forced flow transports the gas to the sensing element. The advective flow dynamics may induce changes in the sensor behaviour relative to the quasi-quiescent condition that may prevail in chamber test methods. One goal of the current activity in the JRC and NREL sensor laboratories is to develop a validated flow through apparatus and methods for hydrogen sensor performance testing. In addition to minimizing the impact on sensor behaviour induced by differences in flow dynamics, challenges associated with flow through methods include the ability to control environmental parameters (humidity, pressure and temperature) during the test and changes in the test gas composition induced by chemical reactions with upstream sensors. Guidelines on flow through test apparatus design and protocols for the evaluation of hydrogen sensor performance are being developed. Various commercial sensor platforms (e.g., thermal conductivity, catalytic and metal semiconductor) were used to demonstrate the advantages and issues with the flow through methodology.JRC.C.1-Energy Storag
Changes in length of the plantar aponeurosis during the stance phase of gait--an in vivo dynamic fluoroscopic study
In locomotion, ligaments and muscles have been recognized to support the arch of the foot. However, it remains unclear to what extent the passive and active structures of the lower extremity support the longitudinal arch of the foot during walking. In this study, the mechanical function of the plantar aponeurosis (PA) is investigated by elongation measurements in vivo during the stance phase of gait, in combination with measurements of the mechanical properties of the PA in vitro. Fluoroscopy was used to measure the dynamic changes in PA length and the angular motion of the metatarsophalangeal joint of the first ray, measured during the stance phase (StPh) in 11 feet. Simultaneously, ground forces were measured. Additionally, four cadaver feet delivered topographic information relating to the PA, and three autopsy specimens of PA served to determine the in vitro mechanical properties of PA. The present study revealed a non-significant peak average PA shortening of 0.48% at about 32.5% StPh, followed by a significant average peak elongation of 3.6% at 77.5% StPh. This average peak elongation of 3.6% corresponds to a force of 292N, as estimated by mechanical testing of the autopsy PA specimens. Considering the maximum peak elongation measured in one volunteer of 4.8% at 76% StPh, a peak PA load of 488N might be expected. Hence, with an average body weight of 751N, as allocated to the 11 investigated feet, this maximum peak force would correspond to about 0.65xbody weight. As far as we are aware, this is the first report on a dynamic fluoroscopic study of the PA in gait with an appreciable number of feet (11 feet). In conclusion, muscles contribute to support of the longitudinal arch of the foot and can possibly relax the PA during gait. The 'windlass effect' for support of the arch in this context is therefore questionable
Evaluation of selectivity of commercial hydrogen sensors
The development of reliable hydrogen sensors is crucial for the safe use of hydrogen. One of the main concerns of end users is sensor reliability in the presence of species other than the target gas, which can lead to false alarms or undetected harmful situations. To assess the selectivity of commercial-off-the-shelf hydrogen sensors, a number of sensors of different technology types were exposed to various interferent gas species. Cross-sensitivity tests were performed in accordance with the recommendations of ISO 26142:2010, using the hydrogen sensor testing facilities of the National Renewable Energy Laboratory and the Joint Research Centre - Institute for Energy and Transport. Most of the sensor platform tested are unaffected by the exposure to the interferents. The Metal-oxide and the Catalytic platform show a remarkable sensitivity to CH4. None of the platforms tested were permanently affected by the exposure to the cross-sensitive species.JRC.F.2-Energy Conversion and Storage Technologie
EVALUATION OF SELECTIVITY OF COMMERCIAL HYDROGEN SENSORS
The development of reliable hydrogen sensors is crucial for the safe use of hydrogen. One of the main concerns of end-users is sensor reliability in the presence of species other than the target gas, which can lead to false alarms or undetected harmful situations. In order to assess the selectivity of commercial of the shelf (COTS) hydrogen sensors a number of sensors of different technology types were exposed to various interferent gas species. Cross-sensitivity tests were performed in accordance to the recommendations of ISO 26142:2010, using the hydrogen sensor testing facilities of NREL and JRC-IET. The results and conclusions arising from this study are presented.JRC.F.2-Cleaner energ