Computer program for stress, stability, and vibration of complex branched shells of revolution: BOSOR 4

Code is easy to use yet is general with respect to: (a) type of analysis to be performed; (b) geometry of shell meridian; (c) type of wall construction; (d) type of boundary conditions, ring supports, and branching configuration; and (e) type of loading

Recent turbulent drag reduction research at Langley Research Center

Three areas are discussed: oscillatory longitudinal curvature, large eddy breakup devices, and small longitudinal surface striations. The first two concepts produced sizable local turbulent skin friction reductions, but further research is required to optimize the effect, reduce parasitic device drag, and provide a net increase in vehicle performance. The surface striations, due to large wetted area increased for a given planform, have not yet yielded a planform-averaged skin friction reduction. Heat transfer data indicated such surfaces may have useful application in heat exchangers

Calculation of turbulent free mixing: Status and problems

An overview of turbulence closure methods is presented along with discussions concerning which method works where and which approaches deserve further development. A table is given which lists the various computational techniques together with their prime usage areas. In addition, free mixing phenomena which were not specifically included in the basic data considered for the conference are summarized

Powder fed sheared dispersal particle generator

A particle generating system is described which is capable of breaking up agglomerations of particles and producing a cloud of uniform, submicron-sized particles at high pressure and high flow rates. This is achieved by utilizing a tubular structure which has injection microslits on is periphery to accept and disperse the desired particle feed. By suppling a carrying fluid at a pressure, of approximately twice the ambient pressure of the velocimeter's settling chamber, the microslits operate at choked flow conditions. The shearing action of this choked flow is sufficient to overcome interparticle bonding forces, thereby breaking up the agglomerates of the particles feed into individual particles

A rational approach to the use of Prandtl's mixing length model in free turbulent shear flow calculations

Prandtl's basic mixing length model was used to compute 22 test cases on free turbulent shear flows. The calculations employed appropriate algebraic length scale equations and single values of mixing length constant for planar and axisymmetric flows, respectively. Good agreement with data was obtained except for flows, such as supersonic free shear layers, where large sustained sensitivity changes occur. The inability to predict the more gradual mixing in these flows is tentatively ascribed to the presence of a significant turbulence-induced transverse static pressure gradient which is neglected in conventional solution procedures. Some type of an equation for length scale development was found to be necessary for successful computation of highly nonsimilar flow regions such as jet or wake development from thick wall flows

Status of linear boundary-layer stability and the e to the nth method, with emphasis on swept-wing applications

The-state-of-the-art for the application of linear stability theory and the e to the nth power method for transition prediction and laminar flow control design are summarized, with analyses of previously published low disturbance, swept wing data presented. For any set of transition data with similar stream distrubance levels and spectra, the e to the nth power method for estimating the beginning of transition works reasonably well; however, the value of n can vary significantly, depending upon variations in disturbance field or receptivity. Where disturbance levels are high, the values of n are appreciably below the usual average value of 9 to 10 obtained for relatively low disturbance levels. It is recommended that the design of laminar flow control systems be based on conservative estimates of n and that, in considering the values of n obtained from different analytical approaches or investigations, the designer explore the various assumptions which entered into the analyses

Calculation of mean and fluctuating properties of the incompressible turbulent boundary layer

Mathematical model for calculation of mean and fluctuating properties of incompressible turbulent boundary layer

Influence of external disturbances and compressibility on free turbulent mixing

It is shown that disturbances in external flow can significantly affect, by as much as an order of magnitude, the turbulent mixing rate in free shear layers and that the length scale of the external flow disturbances is as important as the amplitude. The difference between the effect of wide-band and narrow-band disturbances is stressed. The model for pressure fluctuation term in the kinetic energy equation is included in a two-equation model. The reduced spreading rate in high Mach number, high Reynolds number, adiabatic, free turbulent shear layers is predicted

The Collaborative Development of an Occupational Psychology Internship: Students and Employers as Partners

No abstract available

Computer program analyzes Buckling Of Shells Of Revolution with various wall construction, BOSOR

Computer program performs stability analyses for a wide class of shells without unduly restrictive approximations. The program uses numerical integration, finite difference of finite element techniques to solve with reasonable accuracy almost any buckling problem for shells exhibiting orthotropic behavior