Stabilised columnar mesophases formed by 1:1 mixtures of hexaalkoxytriphenylenes with a hexaphenyltriphenylene-based polymer

The synthesis is reported for a main chain polymer in which the repeat units are 2,3,6,7,10,11-hexaphenyltriphenylene moieties linked through flexible dodecyl chains. In compositions with a series of 2,3,6,7,10,11-hexakis(alkoxy)triphenylenes (HATn) this new polymer forms stable hexagonal columnar liquid crystal phases. These are investigated in detail using optical polarised microscopy (OPM), differential scanning calorimetry (DSC) and X-ray diffraction (XRD). In these mixtures, suppression of crystallisation and enhancement of the clearing temperatures leads to very wide liquid crystal ranges: much wider than those for the HATn materials on their own. For the longer chain HATn compounds (n = 12-16) a columnar rectangular phase is also observed. The enhancement of the liquid crystal phase range is attributed to stabilising complementary polytopic interactions between the planar aromatic moieties

Synthesis and organogelating behaviour of amino acid-functionalised triphenylenes

Four novel amino acid-functionalised triphenylenes have been prepared with glycine, L-alanine, L-phenylalanine and L-tryptophan ethyl ester side-chains. The glycine derivative is a good gelator of chloroform, the alanine derivative gels ethanol and toluene, and the phenylalanine derivative gels benzene and toluene. The tryptophan derivative does not gel any of the solvents tested, most probably due to its more bulky structure, but forms microspheres by evaporation-induced self-assembly. The self-assembly properties of the π-gelators have been investigated using infrared, UV-absorption and fluorescence spectroscopy, concentration- and temperature-dependent NMR, and X-ray scattering experiments on dried xerogel as well as the wet organogel. The latter experiments suggest the glycine gel in chloroform includes columnar aggregates, with an overall disordered columnar oblique mesophase. These compounds are of interest because of the well-known hole-transporting properties of triphenylene liquid crystals: 1-D columnar assemblies of these compounds may find applications in organic electronic devices

One‐Step Preparation of Biocompatible Gold Nanoplates with Controlled Thickness and Adjustable Optical Properties for Plasmon‐Based Applications

The ability to synthesize plasmonic nanomaterials with well‐defined structures and tailorable size is crucial for exploring their potential applications. Gold nanoplates (AuNPLs) exhibit appealing structural and optical properties, yet their applications are limited by difficulties in thickness control. Other challenges include a narrow range of tunability in size and surface plasmon resonance, combined with a synthesis conventionally involving cytotoxic cetyltrimethylammonium (CTA) halide surfactant. Here, a one‐step, high‐yield synthesis of single‐crystalline AuNPLs is developed, based on the combined use of two structure‐directing agents, methyl orange and FeBr3, which undergo preferential adsorption onto different crystalline facets of gold. The obtained AuNPLs feature high shape homogeneity that enables mesoscopic self‐assembly, broad‐range tunability of dimensions (controlled thickness from ≈7 to ≈20 nm, accompanied by modulation of the edge length from ≈150 nm to ≈2 µm) and plasmonic properties. These merits, coupled with a preparation free of CTA‐halide surfactants, have facilitated the exploration of various uses, especially in bio‐related areas. For example, they are demonstrated as biocompatible photothermal agents for cell ablation in NIR I and NIR II windows. This work paves the way to the innovative fabrication of anisotropic plasmonic nanomaterials with desired attributes for wide‐ranging practical applications

Molecular Effects of Glycerol on Lipid Monolayers at the Gas–Liquid Interface: Impact on Microbubble Physical and Mechanical Properties

The production and stability of microbubbles (MBs) is enhanced by increasing the viscosity of both the formation and storage solution, respectively. Glycerol is a good candidate for biomedical applications of MBs, since it is biocompatible, although the exact molecular mechanisms of its action is not fully understood. Here, we investigate the influence glycerol has on lipid-shelled MB properties, using a range of techniques. Population lifetime and single bubble stability were studied using optical microscopy. Bubble stiffness measured by AFM compression is compared with lipid monolayer behavior in a Langmuir–Blodgett trough. We deduce that increasing glycerol concentrations enhances stability of MB populations through a 3-fold mechanism. First, binding of glycerol to lipid headgroups in the interfacial monolayer up to 10% glycerol increases MB stiffness but has limited impact on shell resistance to gas permeation and corresponding MB lifetime. Second, increased solution viscosity above 10% glycerol slows down the kinetics of gas transfer, markedly increasing MB stability. Third, above 10%, glycerol induces water structuring around the lipid monolayer, forming a glassy layer which also increases MB stiffness and resistance to gas loss. At 30% glycerol, the glassy layer is ablated, lowering the MB stiffness, but MB stability is further augmented. Although the molecular interactions of glycerol with the lipid monolayer modulate the MB lipid shell properties, MB lifetime continually increases from 0 to 30% glycerol, indicating that its viscosity is the dominant effect on MB solution stability. This three-fold action and biocompatibility makes glycerol ideal for therapeutic MB formation and storage and gives new insight into the action of glycerol on lipid monolayers at the gas–liquid interface

Soft Ultraviolet (UV) Photopatterning and Metallization of Self-Assembled Monolayers (SAMs) Formed from the Lipoic Acid Ester of α-Hydroxy-1-acetylpyrene: The Generality of Acid-Catalyzed Removal of Thiol-on-Gold SAMs using Soft UV Light.

Under a layer of 0.1 M HCl in isopropanol, soft ultraviolet (UV) (365 nm) photolysis of the thiol-on-gold self-assembled monolayer (SAM) derived from the lipoic acid ester of α-hydroxy-1-acetylpyrene results in the expected removal of the acetylpyrene protecting group. When photolyzing through a mask, this can be used to produce a patterned surface and, at a controlled electrochemical potential, it is then possible to selectively and reversibly electrodeposit copper on the photolyzed regions. Rather surprisingly, under these photolysis conditions, there is not only the expected photodeprotection of the ester but also partial removal of the lipoic acid layer which has been formed. In further studies, it is shown that this type of acid-catalyzed photoremoval of SAM layers by soft UV is a rather general phenomenon and results in the partial removal of the thiol-on-gold SAM layers derived from other ω-thiolated carboxylic acids. However, this phenomenon is chain-length dependent. Under conditions in which there is a ∼60% reduction in the thickness of the SAM derived from dithiobutyric acid, the SAM derived from mercaptoundecanoic acid is almost unaffected. The process by which the shorter-chain SAM layers are partially removed is not fully understood because these compounds do not absorb significantly in the 365 nm region of the spectrum! Significantly, this study shows that acid catalysis photolysis of thiol-on-gold SAMs needs to be used with caution

Textures of Nematic Liquid Crystal Cylindric-Section Droplets Confined by Chemically Patterned Surfaces

The director fields adopted by nematic liquid crystals (LCs) that are confined by the surface to form long, thin droplets are investigated using polarising optical microscopy. Samples are produced by de-wetting of the LC on a surface patterned with alternating high-surface energy and low-surface energy stripes of 10–30 μm width. The droplets obtained are expected to adopt a profile which is that of a longitudinal section of a cylinder and, as this suggests, the director fields observed are variants in the case where the LC is constrained in a cylindrical capillary or fibre. Hence, when there is normal anchoring at the air interface, the textures observed are related to the well-known escaped radial texture (for the nematic LC mixture E7) or plane polar texture (for the LC mixture MLC6609). More surprising is the observation that the nematic LC mixture MLC7023, which is anchored in a planar or tilted manner at the air interface, also gives what appears to be an escaped radial director field. As an exploration of the possibility of using these systems in creating sensors, the effects of adding a chiral dopant and of adding water to the substrates are also investigated

Soft Ultraviolet (UV) Photopatterning and Metallization of Self-Assembled Monolayers (SAMs) Formed from the Lipoic Acid Ester of α-Hydroxy-1-acetylpyrene: The Generality of Acid-Catalyzed Removal of Thiol-on-Gold SAMs using Soft UV Light.

Under a layer of 0.1 M HCl in isopropanol, soft ultraviolet (UV) (365 nm) photolysis of the thiol-on-gold self-assembled monolayer (SAM) derived from the lipoic acid ester of α-hydroxy-1-acetylpyrene results in the expected removal of the acetylpyrene protecting group. When photolyzing through a mask, this can be used to produce a patterned surface and, at a controlled electrochemical potential, it is then possible to selectively and reversibly electrodeposit copper on the photolyzed regions. Rather surprisingly, under these photolysis conditions, there is not only the expected photodeprotection of the ester but also partial removal of the lipoic acid layer which has been formed. In further studies, it is shown that this type of acid-catalyzed photoremoval of SAM layers by soft UV is a rather general phenomenon and results in the partial removal of the thiol-on-gold SAM layers derived from other ω-thiolated carboxylic acids. However, this phenomenon is chain-length dependent. Under conditions in which there is a ∼60% reduction in the thickness of the SAM derived from dithiobutyric acid, the SAM derived from mercaptoundecanoic acid is almost unaffected. The process by which the shorter-chain SAM layers are partially removed is not fully understood because these compounds do not absorb significantly in the 365 nm region of the spectrum! Significantly, this study shows that acid catalysis photolysis of thiol-on-gold SAMs needs to be used with caution

The Control of Director Fields in Phospholipid-Coated Liquid Crystal Droplets

In liquid crystal (LC) droplets, small changes in surface anchoring energy can produce large changes in the director field which result in readily detectable optical effects. This makes them attractive for use as biosensors. Coating LC droplets with a phospholipid monolayer provides a bridge between the hydrophobic world of LCs and the water-based world of biology and makes it possible to incorporate naturally occurring biosensor systems. However, phos-pholipids promote strong perpendicular (homeotropic) anchoring that can inhibit switching of the director field. We show that the tendency for phospholipid layers to promote perpendicular anchoring can be suppressed by using syn-thetic phospholipids in which the acyl chains are terminated with bulky tert-butyl or ferrocenyl groups; the larger these end-group(s), the less likely the system is to be perpendicular/radial. Additionally, the droplet director field is found to be dependent on the nature of the LC, particularly its intrinsic surface properties; but not (apparently) on the sign of the dielectric anisotropy, the proximity to the melting/isotropic phase transition, the surface tension (in air) or the values of the Frank elastic constants