10,158 research outputs found
Life test of a nickel cadmium battery with a protection/reconditioning circuit
Results are discussed for a Ni-Cd battery test over a period of 8 years, 2 months and 44,213 simulated low Earth orbits. The battery cells were protected against overdischarge and reversal at discharge rates up to 25 amperes (1.25C) by a battery protection and reconditioning circuit. The circuit performed flawlessly during the test, and proved its value, both as a battery reconditioner and a cell protection device. Battery cell failures are also discussed. The test demonstrated the viability of using Ni-Cd batteries at depth-of-discharge up to 25 percent for over 5 years in a low Earth orbit
A high voltage electrical power system for low Earth orbit applications
The results of testing a high voltage electrical power system (EPS) breadboard using high voltage power processing equipment developed at Marshall Space Flight Center and Ni-Cd batteries are discussed. These test results are used to extrapolate to an efficient, reliable, high capacity EPS for near term low Earth orbit, high power applications. EPS efficiencies, figures of merit, and battery reliability with a battery protection and reconditioning circuit are presented
Hubble space telescope six-battery test bed
A test bed for a large space power system breadboard for the Hubble Space Telescope (HST) was designed and built to test the system under simulated orbital conditions. A discussion of the data acquisition and control subsystems designed to provide for continuous 24 hr per day operation and a general overview of the test bed is presented. The data acquisition and control subsystems provided the necessary monitoring and protection to assure safe shutdown with protection of test articles in case of loss of power or equipment failure over the life of the test (up to 5 years)
A programmable power processor for a 25-kW power module
A discussion of the power processor for an electrical power system for a 25-kW Power Module that could support the Space Shuttle program during the 1980's and 1990's and which could be a stepping stone to future large space power systems is presented. Trades that led to the selection of a microprocessor-controlled power processor are briefly discussed. Emphasis is given to the power processing equipment that uses a microprocessor to provide versatility that allows multiple use and to provide for future growth by reprogramming output voltage to a higher level (to 120 V from 30 V). Efficiency data from a breadboard programmable power processor are presented, and component selection and design considerations are also discussed
Characteristics of Magnetohydrodynamic Oscillations Observed with Michelson Doppler Imager
We report on the spatial distribution of magnetogram oscillatory power and
phase angles between velocity and magnetogram signals as observed with the
Michelson Doppler Imager. The dataset is 151.25 arcsec times 151.25 arcsec
containing sunspot from Dec 2, 1997 with a temporal sampling interval of 60
seconds and spatial sampling of 0.605 arcsec. Simultaneously observed continuum
intensity and surface velocity accompany the magnetic information. We focus on
three frequency regimes: 0.5-1.0, 3.0-3.5 and 5.5-6.0 mHz corresponding roughly
to timescales of magnetic evolution, p-modes and the 3 minute resonant sunspot
oscillation. Significant low frequency magnetogram power is found in lower flux
pixels, 100-300 Gauss, in a striking ring with filamentary structure
surrounding sunspot. Five minute magnetogram power peaks in extended regions of
flux 600-800 Gauss. The 3 minute oscillation is observed in sunspot umbra in
pixels whose flux measures 1300-1500 Gauss. Phase angles of approximately -90
degrees between velocity and magnetic flux in the 3.0-3.5 and 5.5-6.0 mHz
regimes are found in regions of significant cross amplitude.Comment: 4 Pages, 4 Figures -- For better Figure files see:
http://www.astro.ucla.edu/~norton/pub_list.htm
Factors Associated with Recurrence of Varicose Veins after Thermal Ablation: Results of The Recurrent Veins after Thermal Ablation Study
Background. The goal of this retrospective cohort study (REVATA) was to determine the site, source, and contributory factors of varicose vein recurrence after radiofrequency (RF) and laser ablation. Methods. Seven centers enrolled patients into the study over a 1-year period. All patients underwent previous thermal ablation of the great saphenous vein (GSV), small saphenous vein (SSV), or anterior accessory great saphenous vein (AAGSV). From a specific designed study tool, the etiology of recurrence was identified. Results. 2,380 patients were evaluated during this time frame. A total of 164 patients had varicose vein recurrence at a median of 3 years. GSV ablation was the initial treatment in 159 patients (RF: 33, laser: 126, 52 of these patients had either SSV or AAGSV ablation concurrently). Total or partial GSV recanalization occurred in 47 patients. New AAGSV reflux occurred in 40 patients, and new SSV reflux occurred in 24 patients. Perforator pathology was present in 64% of patients. Conclusion. Recurrence of varicose veins occurred at a median of 3 years after procedure. The four most important factors associated with recurrent veins included perforating veins, recanalized GSV, new AAGSV reflux, and new SSV reflux in decreasing frequency. Patients who underwent RF treatment had a statistically higher rate of recanalization than those treated with laser
HypTrails: A Bayesian Approach for Comparing Hypotheses About Human Trails on the Web
When users interact with the Web today, they leave sequential digital trails
on a massive scale. Examples of such human trails include Web navigation,
sequences of online restaurant reviews, or online music play lists.
Understanding the factors that drive the production of these trails can be
useful for e.g., improving underlying network structures, predicting user
clicks or enhancing recommendations. In this work, we present a general
approach called HypTrails for comparing a set of hypotheses about human trails
on the Web, where hypotheses represent beliefs about transitions between
states. Our approach utilizes Markov chain models with Bayesian inference. The
main idea is to incorporate hypotheses as informative Dirichlet priors and to
leverage the sensitivity of Bayes factors on the prior for comparing hypotheses
with each other. For eliciting Dirichlet priors from hypotheses, we present an
adaption of the so-called (trial) roulette method. We demonstrate the general
mechanics and applicability of HypTrails by performing experiments with (i)
synthetic trails for which we control the mechanisms that have produced them
and (ii) empirical trails stemming from different domains including website
navigation, business reviews and online music played. Our work expands the
repertoire of methods available for studying human trails on the Web.Comment: Published in the proceedings of WWW'1
Computing the entropy of user navigation in the web
Navigation through the web, colloquially known as "surfing", is one of the main activities of users during web interaction. When users follow a navigation trail they often tend to get disoriented in terms of the goals of their original query and thus the discovery of typical user trails could be useful in providing navigation assistance. Herein, we give a theoretical underpinning of user navigation in terms of the entropy of an underlying Markov chain modelling the web topology. We present a novel method for online incremental computation of the entropy and a large deviation result regarding the length of a trail to realize the said entropy. We provide an error analysis for our estimation of the entropy in terms of the divergence between the empirical and actual probabilities. We then indicate applications of our algorithm in the area of web data mining. Finally, we present an extension of our technique to higher-order Markov chains by a suitable reduction of a higher-order Markov chain model to a first-order one
- …