Asymmetric Dual Axis Energy Recovery Linac for Ultra-High Flux sources of coherent X-ray/THz radiation: Investigations Towards its Ultimate Performance

In order for sources of coherent high brightness and intensity THz and X-Ray radiation to be accepted by university or industrial R&D laboratories, truly compact, high current and efficient particle accelerators are required. The demand for compactness and efficiency can be satisfied by superconducting RF energy recovery linear accelerators (SRF ERL) allowing effectively minimising the footprint and maximising the efficiency of the system. However such set-ups are affected by regenerative beam-break up (BBU) instabilities which limit the beam current and may terminate the beam transport as well as energy recuperation. In this paper we suggest and discuss a SRF ERL with asymmetric configuration of resonantly coupled accelerating and decelerating cavities. In this type of SRF ERL an electron bunch is passing through accelerating and decelerating cavities once and, as we show in this case, the regenerative BBU instability can be minimised allowing high currents to be achieved. We study the BBU start current in such an asymmetric ERL via analytical and numerical models and discuss the properties of such a system

Quantum Clock Synchronization: a Multi-Party Protocol

We present a multi-party quantum clock synchronization protocol that utilizes shared prior entanglement and broadcast of classical information to synchronize spatially separated clocks. Notably, it is necessary only for any one party to publish classical information. Consequently, the efficacy of the method is independent of the relative location of the parties. The suggested protocol is robust and does not require precise sequencing of procedural steps.Comment: 3 page

Solid metabolic waste transport and stowage investigation

The basic Waste Collection System (WCS) design under consideration utilized air flow to separate the stool from the WCS user and to transport the fecal material to a slinger device for subsequent deposition on a storage bowel. The major parameters governing stool separation and transport were found to be the area of the air inlet orifices, the configuration of the air inlet orifice and the transport air flow. Separation force and transport velocity of the stool were studied. The developed inlet orifice configuration was found to be an effective design for providing fecal separation and transport. Simulated urine tests and female user tests in zero gravity established air flow rates between 0.08 and 0.25 cu sm/min (3 and 9 scfm) as satisfactory for entrapment, containment and transport of urine using an urinal. The investigation of air drying of fecal material as a substitute for vacuum drying in a WCS breadboard system showed that using baseline conditions anticipated for the shuttle cabin ambient atmosphere, flow rates of 0.14 cu sm/min (5 cfm) were adequate for drying and maintaining biological stability of the fecal material

Non-circular features in Saturn's D ring: D68

D68 is a narrow ringlet located only 67,627 km (1.12 planetary radii) from Saturn's spin axis. Images of this ringlet obtained by the Cassini spacecraft reveal that this ringlet exhibits persistent longitudinal brightness variations and a substantial eccentricity (ae=25+/-1 km). By comparing observations made at different times, we confirm that the brightness variations revolve around the planet at approximately the local orbital rate (1751.6 degrees/day), and that the ringlet's pericenter precesses at 38.243+/-0.008 degrees/day, consistent with the expected apsidal precession rate at this location due to Saturn's higher-order gravitational harmonics. Surprisingly, we also find that the ringlet's semi-major axis appears to be decreasing with time at a rate of 2.4+/-0.4 km/year between 2005 and 2013. A closer look at these measurements, along with a consideration of earlier Voyager observations of this same ringlet, suggests that the mean radius of D68 moves back and forth, perhaps with a period of around 15 Earth years or about half a Saturn year. These observations could place important constraints on both the ringlet's local dynamical environment and the planet's gravitational field.Comment: 39 Pages, 11 Figures accepted for publication in Icarus Text slightly modified to match corrections to proof

Development and Testing of a 2-D Transfer CCD

This paper describes the development, operation, and characterization of charge-coupled devices (CCDs) that feature an electrode structure that allows the transfer of charge both horizontally and vertically through the image area. Such devices have been termed two-dimensional (2-D) transfer CCDs (2DT CCDs), as opposed to the conventional devices, which might be called one-dimensional transfer CCDs, but in other respects are the same as conventional CCD devices. Batches of two different 2DT CCD test devices, featuring different electrode structures but with identical clocking operation in each case, were produced and tested. The methodology of 2-D charge transfer in each of the device types is described, followed by a presentation of test results from the new CCDs. The ability of both 2DT CCD transfer electrode schemes to successfully transfer charge in both horizontal and vertical directions in the image section of the devices has been proven, opening up potential new applications for 2DT CCD use

The mammals of El Salvador

http://deepblue.lib.umich.edu/bitstream/2027.42/56361/1/MP117.pd

Wakefield damping for the CLIC crab cavity

A crab cavity is required in the CLIC to allow effective head-on collision of bunches at the IP. A high operating frequency is preferred as the deflection voltage required for a given rotation angle and the RF phase tolerance for a crab cavity are inversely proportional to the operating frequency. The short bunch spacing of the CLIC scheme and the high sensitivity of the crab cavity to dipole kicks demand very high damping of the inter-bunch wakes, the major contributor to the luminosity loss of colliding bunches. This paper investigates the nature of the wakefields in the CLIC crab cavity and the possibility of using various damping schemes to suppress them effectively

A QTL for osteoporosis detected in an F2 population derived from White Leghorn chicken lines divergently selected for bone index

Osteoporosis, resulting from progressive loss of structural bone during the period of egg-laying in hens, is associated with an increased susceptibility to bone breakage. To study the genetic basis of bone strength, an F cross was produced from lines of hens that had been divergently selected for bone index from a commercial pedigreed White Leghorn population. Quantitative trait loci (QTL) affecting the bone index and component traits of the index (tibiotarsal and humeral strength and keel radiographic density) were mapped using phenotypic data from 372 F individuals in 32 F families. Genotypes for 136 microsatellite markers in 27 linkage groups covering ∼80% of the genome were analysed for association with phenotypes using within-family regression analyses. There was one significant QTL on chromosome 1 for bone index and the component traits of tibiotarsal and humeral breaking strength. Additive effects for tibiotarsal breaking strength represented 34% of the trait standard deviation and 7.6% of the phenotypic variance of the trait. These QTL for bone quality in poultry are directly relevant to commercial populations