New main reflector, subreflector and dual chamber concepts for compact range applications

A compact range is a facility used for the measurement of antenna radiation and target scattering problems. Most presently available parabolic reflectors do not produce ideal uniform plane waves in the target zone. Design improvements are suggested to reduce the amplitude taper, ripple and cross polarization errors. The ripple caused by diffractions from the reflector edges can be reduced by adding blended rolled edges and shaping the edge contour. Since the reflected edge continues smoothly from the parabola onto the rolled surface, rather than being abruptly terminated, the discontinuity in the reflected field is reduced which results in weaker diffracted fields. This is done by blending the rolled edges from the parabola into an ellipse. An algorithm which enables one to design optimum blended rolled edges was developed that is based on an analysis of the continuity of the surface radius of curvature and its derivatives across the junction. Futhermore, a concave edge contour results in a divergent diffracted ray pattern and hence less stray energy in the target zone. Design equations for three-dimensional reflectors are given. Various examples were analyzed using a new physical optics method which eliminates the effects of the false scattering centers on the incident shadow boundaries. A Gregorian subreflector system, in which both the subreflector and feed axes are tilted, results in a substantial reduction in the amplitude taper and cross polarization errors. A dual chamber configuration is proposed to eliminate the effects of diffraction from the subreflector and spillover from the feed. A computationally efficient technique, based on ray tracing and aperture integration, was developed to analyze the scattering from a lossy dielectric slab with a wedge termination

Alien Registration- Burnside, John I. (Portland, Cumberland County)

https://digitalmaine.com/alien_docs/24084/thumbnail.jp

Design of blended rolled edges for compact range main reflectors

A procedure to design blended rolled edge terminations for arbitrary rim shape compact range main reflectors is presented. The reflector may be center-fed or offset-fed. The design procedure leads to a reflector which has a continuous and smooth surface. This procedure also ensures small diffracted fields from the junction between the paraboloid and the blended rolled edge while satisfying certain constraints regarding the maximum height of the reflector and minimum operating frequency of the system. The prescribed procedure is used to design several reflectors and the performance of these reflectors is presented

A comparison of medetomidine and its active enantiomer dexmedetomidine when administered with ketamine in mice

Medetomidine-ketamine (MK) and dexmedetomidine-ketamine (DK) are widely used to provide general anaesthesia in laboratory animals, but have not been compared directly in many of these species, including rodents. This study aimed to compare the onset and depth of anaesthesia, and changes in vital signs, after intraperitoneal (IP) or subcutaneous (SC) administration of ketamine (75 mg kg-1) combined with medetomidine (1 mg kg-1) or dexmedetomidine (0.5 mg kg-1) using a randomised semi-crossover design with >= 48 hours between treatments in 10 male and 10 female mice. Each mouse was anaesthetised twice using the same administration route (IP or SC): once with each drug-ketamine combination. Anaesthetised mice were monitored on a heating pad without supplemental oxygen for 89 minutes; atipamezole was administered for reversal. The times that the righting reflex was lost post-injection and returned post-reversal were analysed using general linear models. Tail-pinch and pedal reflexes were examined using binomial generalized linear models. Pulse rate (PR), respiratory rate (fr), and arterial haemoglobin saturation (SpO2) were compared using generalized additive mixed models. There were no significant differences among treatments for the times taken for loss and return of the righting reflex, or response of the tail-pinch reflex. The pedal withdrawal reflex was abolished more frequently with MK than DK over time (P = 0.021). The response of PR and SpO2 were similar among treatments, but fr was significantly higher with MK than DK (P <= 0.0005). Markedly low SpO2 concentrations occurred within 5 minutes post-injection (83.8 +/- 6.7 %) in all treatment groups and were most severe after 89 minutes lapsed (66.7 +/- 7.5 %). No statistical differences were detected in regards to administration route (P <= 0.94). This study failed to demonstrate clinical advantages of the enantiomer dexmedetomidine over medetomidine when combined with ketamine to produce general anaesthesia in mice. At the doses administered, deep surgical anaesthesia was not consistently produced with either combination; therefore, anaesthetic depth must be assessed before performing surgical procedures. Supplemental oxygen should always be provided during anaesthesia to prevent hypoxaemia

Electromagnetic Scattered Field Evaluation and Data Compression Using Imaging Techniques

This is the final report on Project #727625 between The Ohio State University and NASA, Lewis Research Center, Cleveland, Ohio. Under this project, a data compression technique for scattered field data of electrically large targets is developed. The technique was applied to the scattered fields of two targets of interest. The backscattered fields of the scale models of these targets were measured in a ra compact range. For one of the targets, the backscattered fields were also calculated using XPATCH computer code. Using the technique all scattered field data sets were compressed successfully. A compression ratio of the order 40 was achieved. In this report, the technique is described briefly and some sample results are included

Radar cross section studies

The ultimate goal is to generate experimental techniques and computer codes of rather general capability that would enable the aerospace industry to evaluate the scattering properties of aerodynamic shapes. Another goal involves developing an understanding of scattering mechanisms so that modification of the vehicular structure could be introduced within constraints set by aerodynamics. The development of indoor scattering measurement systems with special attention given to the compact range is another goal. There has been considerable progress in advancing state-of-the-art scattering measurements and control and analysis of the electromagnetic scattering from general targets

Radar Cross Section Studies/Compact Range Research

A summary is given of the achievements of NASA Grant NsG-1613 by Ohio State University from May 1, 1987 to April 30, 1988. The major topics covered are as follows: (1) electromagnetic scattering analysis; (2) indoor scattering measurement systems; (3) RCS control; (4) waveform processing techniques; (5) material scattering and design studies; (6) design and evaluation of design studies; and (7) antenna studies. Major progress has been made in each of these areas as verified by the numerous publications produced

A Model for the Analysis of Caries Occurrence in Primary Molar Tooth Surfaces

Recently methods of caries quantification in the primary dentition have moved away from summary ‘whole mouth’ measures at the individual level to methods based on generalised linear modelling (GLM) approaches or survival analysis approaches. However, GLM approaches based on logistic transformation fail to take into account the time-dependent process of tooth/surface survival to caries. There may also be practical difficulties associated with casting parametric survival-based approaches in a complex multilevel hierarchy and the selection of an optimal survival distribution, while non-parametric survival methods are not generally suitable for the assessment of supplementary information recorded on study participants. In the current investigation, a hybrid semi-parametric approach comprising elements of survival-based and GLM methodologies suitable for modelling of caries occurrence within fixed time periods is assessed, using an illustrative multilevel data set of caries occurrence in primary molars from a cohort study, with clustering of data assumed to occur at surface and tooth levels. Inferences of parameter significance were found to be consistent with previous parametric survival-based analyses of the same data set, with gender, socio-economic status, fluoridation status, tooth location, surface type and fluoridation status-surface type interaction significantly associated with caries occurrence. The appropriateness of the hierarchical structure facilitated by the hybrid approach was also confirmed. Hence the hybrid approach is proposed as a more appropriate alternative to primary caries modelling than non-parametric survival methods or other GLM-based models, and as a practical alternative to more rigorous survival-based methods unlikely to be fully accessible to most researchers