29 research outputs found

    Der Unternehmer. Morphologie und Semantik einer ökonomischen Kategorie

    Get PDF

    Der Unternehmer - als Wirklichkeit

    Get PDF

    In-Orbit Performance of the GRACE Follow-on Laser Ranging Interferometer

    Get PDF
    The Laser Ranging Interferometer (LRI) instrument on the Gravity Recovery and Climate Experiment (GRACE) Follow-On mission has provided the first laser interferometric range measurements between remote spacecraft, separated by approximately 220 km. Autonomous controls that lock the laser frequency to a cavity reference and establish the 5 degrees of freedom two-way laser link between remote spacecraft succeeded on the first attempt. Active beam pointing based on differential wave front sensing compensates spacecraft attitude fluctuations. The LRI has operated continuously without breaks in phase tracking for more than 50 days, and has shown biased range measurements similar to the primary ranging instrument based on microwaves, but with much less noise at a level of 1 nm/Hz at Fourier frequencies above 100 mHz. © 2019 authors. Published by the American Physical Society

    31st Annual Meeting and Associated Programs of the Society for Immunotherapy of Cancer (SITC 2016) : part two

    Get PDF
    Background The immunological escape of tumors represents one of the main ob- stacles to the treatment of malignancies. The blockade of PD-1 or CTLA-4 receptors represented a milestone in the history of immunotherapy. However, immune checkpoint inhibitors seem to be effective in specific cohorts of patients. It has been proposed that their efficacy relies on the presence of an immunological response. Thus, we hypothesized that disruption of the PD-L1/PD-1 axis would synergize with our oncolytic vaccine platform PeptiCRAd. Methods We used murine B16OVA in vivo tumor models and flow cytometry analysis to investigate the immunological background. Results First, we found that high-burden B16OVA tumors were refractory to combination immunotherapy. However, with a more aggressive schedule, tumors with a lower burden were more susceptible to the combination of PeptiCRAd and PD-L1 blockade. The therapy signifi- cantly increased the median survival of mice (Fig. 7). Interestingly, the reduced growth of contralaterally injected B16F10 cells sug- gested the presence of a long lasting immunological memory also against non-targeted antigens. Concerning the functional state of tumor infiltrating lymphocytes (TILs), we found that all the immune therapies would enhance the percentage of activated (PD-1pos TIM- 3neg) T lymphocytes and reduce the amount of exhausted (PD-1pos TIM-3pos) cells compared to placebo. As expected, we found that PeptiCRAd monotherapy could increase the number of antigen spe- cific CD8+ T cells compared to other treatments. However, only the combination with PD-L1 blockade could significantly increase the ra- tio between activated and exhausted pentamer positive cells (p= 0.0058), suggesting that by disrupting the PD-1/PD-L1 axis we could decrease the amount of dysfunctional antigen specific T cells. We ob- served that the anatomical location deeply influenced the state of CD4+ and CD8+ T lymphocytes. In fact, TIM-3 expression was in- creased by 2 fold on TILs compared to splenic and lymphoid T cells. In the CD8+ compartment, the expression of PD-1 on the surface seemed to be restricted to the tumor micro-environment, while CD4 + T cells had a high expression of PD-1 also in lymphoid organs. Interestingly, we found that the levels of PD-1 were significantly higher on CD8+ T cells than on CD4+ T cells into the tumor micro- environment (p < 0.0001). Conclusions In conclusion, we demonstrated that the efficacy of immune check- point inhibitors might be strongly enhanced by their combination with cancer vaccines. PeptiCRAd was able to increase the number of antigen-specific T cells and PD-L1 blockade prevented their exhaus- tion, resulting in long-lasting immunological memory and increased median survival

    Die Struktur der Herstellkosten bei Vollautomation und permanenter Erzeugung

    No full text

    Wkład rozpuszczalników z farb drogowych do tworzenia się ozonu troposferycznego

    Get PDF
    Solventborne road marking paints are meaningful sources of Volatile Organic Compounds (VOCs), which under solar irradiation affect formation of tropospheric ozone, a signif cant pulmonary irritant and a key pollutant responsible for smog formation. Influence of particular VOCs on ground-level ozone formation potential, quantified in Maximum Incremental Reactivities (MIR), were used to calculate potential contribution of solvents from road marking paints used in Poland to tropospheric ozone formation. Based on 2014 data, limited only to roads administered by General Directorate for National Roads and Motorways (GDDKiA), emissions of VOCs from road marking paints in Poland were about 494 838 kg, which could lead to production of up to 1 003 187 kg of ropospheric ozone. If aromatic-free solventborne paints based on ester solvents, such as are commonly used in Western Europe, were utilised, VOC emissions would not be lowered, but potentially formed ground-level ozone could be limited by 50-70%. Much better choice from the perspective of environmental protection would be the use of waterborne road marking paints like those mandated in Scandinavia – elimination of up to 82% of the emitted VOCs and up to 95% of the potentially formed tropospheric ozone could be achieved.Rozpuszczalnikowe farby do poziomego znakowania dróg są znaczącym źródłem lotnych związków organicznych (Volatile Organic Compounds, VOC). VOC ulegając rozkładowi pod wpływem promieniowania słonecznego wpływają na powstawanie w troposferze ozonu, który jest związkiem chemicznym znacząco drażniącym system oddechowy i współodpowiedzialnym za powstawanie smogu. Wpływ poszczególnych VOC na tworzenie ozonu troposferycznego jest nierówny; wartości te zostały określone w maksymalnych przyrostowych reaktywnościach (Maximum Incremental Reactivities, MIR). MIR zostały użyte do obliczenia maksymalnego wpływu rozpuszczalników w farbach używanych w Polsce do znakowania dróg na tworzenie ozonu troposferycznego. Na podstawie danych z roku 2014, ograniczających się jedynie do dróg zarządzanych przez Generalną Dyrekcję Dróg Krajowych i Autostrad (GDDKiA), emisja VOC z farb używanych do znakowania dróg dotyczyła ilości około 494 838 kg, co mogło prowadzić do produkcji około 1 003 187 kg ozonu. Jeżeli wykorzystywane byłyby farby bez rozpuszczalników aromatycznych, oparte na estrach, jak to ma miejsce w Europie Zachodniej, emisje VOC nie uległaby zmianie, ale potencjał formowania ozonu zostałby ograniczony o 50-70%. Jednakże, z punktu widzenia ochrony środowiska, najlepszym rozwiązaniem byłoby wykorzystywanie farb wodnych, wedle wymagań skandynawskich – wówczas możliwa byłaby eliminacja do 82% emitowanych VOC i ograniczenie do 95% powstałego ozonu troposferycznego

    Phantomatic Road Works in Poland: A View from a Dashboard Cam

    No full text
    Correct signage belongs to critical factors affecting road traffic safety. During a naturalistic driving study in Poland major mistakes associated with signage were noticed and analysed: road works were announced and speed limits were reduced from 120 km/h to 70−80 km/h, but no road construction could be found. Measurements of drivers’ speed showed their complete disregard of the limitations: average speed of light vehicles remained at 113 km/h and lorries at 88 km/h. Assessment of the encountered 683 road signs revealed 12.5% of them to be inadequate (10.9% falsely informed drivers). Evaluation of contrast ratio of road markings (their replacement was the claimed reason for road work) showed low values both before and after re-placement (Weber contrast 0.6). It is hypothesised that erroneous road signage and its contradiction with the visible road features are contributing to the permanent disobedience of traffic rules in Poland and are decreasing road safety

    Glass Beads for Road Markings: Surface Damage and Retroreflection Decay Study

    No full text
    Road markings must be reflectorised with glass beads to be visible to drivers at night, retro-reflecting light from vehicle’s headlights, which is critical for road safety. Four commonly used types of glass beads were evaluated in a laboratory setting for retroreflectivity and their surfaces were analysed using optical and scanning electron microscopy. The glass beads were subjected to abrasion and a visual correlation was sought between the measured retroreflectivity and the surface damage. Scratching the glass bead surface with corundum in a rotary drum resulted in major differences in the rates of damage development, depending on the type of the glass beads, and it could be correlated with the rate of retroreflectivity decay. The relative results from abrasion testing were confirmed under tyre action during a turntable evaluation. Based on the outcomes of these tests, service lives, defined as maintaining appropriately high retroreflectivity, were predicted and used to calculate the consumption of raw materials—the basic sustainability parameter. It was shown that the use of ‘premium’ glass beads, enhanced with TiO2 and made in a proprietary process, provided the road marking system characterised by the lowest long-term consumption of resources
    corecore