128 research outputs found

    Surface Characteristics of Orthodontic Materials and Their Effects on Adhesion of Mutans streptococci

    Get PDF
    Objective: To test the hypothesis that there are no significant differences in the adhesion of mutans streptococci (MS) to various orthodontic materials based on their surface characteristics. Materials and Methods: Surface roughness (SR) and surface free energy (SFE) characteristics were investigated for nine different orthodontic materials (four orthodontic adhesives, three bracket raw materials, hydroxyapatite blocks, and bovine incisors) using confocal laser scanning microscopy and sessile drop method. Each material, except the bovine incisors, was incubated with whole saliva or phosphate-buffered saline for 2 hours. Adhesion assays were performed by incubating tritium-labeled MS with each material for 3 or 6 hours. Results: Orthodontic adhesives had higher SFE characteristics and lower SR than bracket materials. Orthodontic adhesives showed a higher MS retaining capacity than bracket materials, and MS adhesion to resin-modified glass ionomer and hydroxyapatite was highest. Extended incubation time increased MS adhesion, while saliva coating did not significantly influence MS adhesion. SFE, specifically its dispersive and polar components, was positively correlated with MS adhesion, irrespective of saliva coating. Conclusions: The hypothesis is rejected. This study suggests that SFE characteristics play an important role in the initial MS adhesion to orthodontic materials.This study was supported by a grant from the Korea Health 21 Project, Ministry of Health and Welfare, Republic of Korea (03-PJ1-PG1-CH09-0001)

    Orthodontic bonding procedures significantly influence biofilm composition

    Get PDF
    Background Because changes in surface properties affect bacterial adhesion, orthodontic bonding procedures may significantly influence biofilm formation and composition around orthodontic appliances. However, most studies used a mono-species biofilm model under static conditions, which does not simulate the intraoral environment and complex interactions of oral microflora because the oral cavity is a diverse and changeable environment. In this study, a multi-species biofilm model was used under dynamic culture conditions to assess the effects of the orthodontic bonding procedure on biofilm formation and compositional changes in two main oral pathogens, Streptococcus mutans and Porphyromonas gingivalis. Methods Four specimens were prepared with bovine incisors and bonding adhesive: untreated enamel surface (BI), enamel surface etched with 37% phosphoric acid (ET), primed enamel surface after etching (PR), and adhesive surface (AD). Surface roughness (SR), surface wettability (SW), and surface texture were evaluated. A multi-species biofilm was developed on each surface and adhesion amounts of Streptococcus mutans, Porphyromonas gingivalis, and total bacteria were analyzed at day 1 and day 4 using real-time polymerase chain reaction. After determining the differences in biofilm formation, SR, and SW between the four surfaces, relationships between bacteria levels and surface properties were analyzed. Results The order of SR was AD < PR < BI < ET, as BI and ET showed more irregular surface texture than PR and AD. For SW, ET had the greatest value followed by PR, BI, and AD. S. mutans and P. gingivalis showed greater adhesion to BI and ET with rougher and more wettable surfaces than to AD with smoother and less wettable surfaces. The adhesion of total bacteria and S. mutans significantly increased over time, but the amount of P. gingivalis decreased. The adhesion amounts of all bacteria were positively correlated with SR and SW, irrespective of incubation time. Conclusions Within the limitations of this study, changes in SR and SW associated with orthodontic bonding had significant effects on biofilm formation and composition of S. mutans and P. gingivalis.This work was supported by the National Research Foundation of Korea [NRF-2017R1A2B4001834]

    Cytotoxicity and reactive oxygen species production induced by different co-monomer eluted from nanohybrid dental composites

    Get PDF
    Background Safety issues for dental restorative composites are critical to material selection, but, limited information is available to dental practitioners. This study aimed to compare the chemical and biological characteristics of three nanohybrid dental composites by assessing filler particle analysis, monomer degree of conversion (DC), the composition of eluates, and cytotoxicity and reactive oxygen species (ROS) production in fibroblasts. Methods Three nanohybrid composites (TN, Tetric N-Ceram; CX, Ceram X Sphere Tec One; and DN, DenFil NX) were used. The size distribution and morphology of the filler particles were analysed using scanning electron microscopy (n = 5). The DC was measured via micro-Raman spectroscopy (n = 5). For the component analysis, methanol eluates from the light-polymerised composites were evaluated by gas chromatography/mass spectrometry (n = 3). The eluates were prepared from the polymerised composites after 24h in a cell culture medium. A live/dead assay (n = 9) and Water-Soluble Tetrazolium-1 assay (n = 9) were performed and compared with negative and positive controls. The ROS in composites were compared with NC. Statistical significance in differences was assessed using a t-test and ANOVA (α = 0.05). Results Morphological variations in different-sized fillers were observed in the composites. The DC values were not significantly different among the composites. The amounts of 2-hydroxyethyl methacrylate (HEMA) were higher in TN than DN (p = 0.0022) and triethylene glycol dimethacrylate (TEGDMA) in CX was higher than in others (p < 0.0001). The lowest cell viability was shown in CX (p < 0.0001) and the highest ROS formation was detected in TN (p < 0.0001). Conclusions Three nanohybrid dental composites exhibited various compositions of filler sizes and resin components, resulting in different levels of cytotoxicity and ROS production. Chemical compositions of dental composites can be considered with their biological impact on safety issues in the intraoral use of dental restorative composites. CX with the highest TEGDMA showed the highest cytotoxicity induced by ROS accumulation. DN with lower TEGDMA and HEMA presented the highest cell viability.This work was supported by the Korea Medical Device Development Fund grant funded by the Korea government (the Ministry of Science and ICT, the Ministry of Trade, Industry and Energy, the Ministry of Health & Wel‑fare, the Ministry of Food and Drug Safety) (Project Number: 9991006717, KMDF_PR_20200901_0044)

    Impact of prior lamivudine use on the antiviral efficacy and development of resistance to entecavir in chronic hepatitis B patients

    Get PDF
    Background/AimsTo determine the efficacies of entecavir (ETV) in nucleos(t)ide analogue (NA)-naïve chronic hepatitis B (CHB) patients and in those with prior lamivudine (LAM) use who did not develop resistance.MethodsWe retrospectively enrolled 337 patients with CHB who were treated with ETV (0.5 mg daily) for at least 30 months. The study included 270 (80.1%) NA-naïve patients and 67 (19.9%) LAM-use patients. Ten of the LAM-use patients were refractory to LAM therapy without developing resistance.ResultsGenotypic resistance to ETV developed more frequently in the LAM-use group (13.1%) than in the NA-naïve group (2.6%) at 60 months (P=0.009). In subgroup analysis, after excluding the 10 patients who were refractory to LAM therapy, the cumulative probability of ETV resistance did not differ significantly between the two groups (P=0.149). Prior LAM refractoriness and a higher hepatitis B virus DNA level at month 12 were independent predictive factors for the development of ETV resistance.ConclusionsETV resistance developed more frequently in LAM-use patients with CHB. However, prior LAM use without refractoriness did not affect the development of ETV resistance. The serum hepatitis B virus DNA level at month 12 was a major predictor for the development of ETV resistance

    Comparison of Early and Late Conversion of Sirolimus in Experimental Model of Chronic Cyclosporine Nephropathy

    Get PDF
    Sirolimus (SRL) is a promising drug for replacing calcineurin inhibitors. We performed this study to determine the optimal time of conversion from cyclosporine (CsA) to SRL in an experimental model of chronic CsA nephropathy. Three separate studies were performed. In the first study, SRL was given to rats with or without CsA for 4 weeks. In the second study, rats were treated initially with CsA for 1 week, and then switched to SRL (early conversion). In the third study, CsA was given for 4 weeks and then replaced by SRL for 4 weeks treatment of CsA (late conversion). The influence of SRL on CsA-induced renal injury was evaluated by assessing renal function, histopathology (interstitial inflammation and fibrosis), and apoptotic cell death. Combined CsA and SRL treatment significantly impaired renal function, increased apoptosis, and interstitial fibrosis and inflammation compared with CsA or SRL treatment alone. Early conversion to SRL did not change renal function, histopathology, or apoptosis compared with early CsA withdrawal. By contrast, late conversion to SRL significantly aggravated these parameters compared with late CsA withdrawal. In conclusion, early conversion from CsA to SRL is effective in preventing CsA-induced renal injury in a setting of CsA-induced renal injury

    Urinary adiponectin and albuminuria in non-diabetic hypertensive patients: an analysis of the ESPECIAL trial

    Get PDF
    This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited.Abstract Background Although adiponectin levels have been reported to be correlated with albuminuria, this issue remains unresolved in non-diabetic hypertensive subjects, particularly when urinary adiponectin is considered. Methods Urinary adiponectin levels were examined using an enzyme-linked immunosorbent assay in 229 participants. who used olmesartan as a hypertensive agent. Their albuminuria levels were measured for 16 weeks after randomization and initiation of conventional or intensive diet education. Linear or logistic regression models were applied, as appropriate, to explore the relationship with albuminuria itself or its response after the intervention. Results Urinary adiponectin levels were positively related to baseline albuminuria level (r = 0.529). After adjusting for several covariates, the adiponectin level was associated with the albuminuria level (β = 0.446). Among the 159 subjects with baseline macroalbuminuria, the risk of consistent macroalbuminuria (> 300 mg/day) at 16 weeks was higher in the 3rd tertile of adiponectin than in the 1st tertile (odds ratio = 6.9), despite diet education. In contrast, among all subjects, the frequency of the normoalbuminuria achievement (< 30 mg/day) at 16 weeks was higher in the 1st tertile than in the 3rd tertile (odds ratio = 13.0). Conclusions Urinary adiponectin may be a useful biomarker for albuminuria or its response after treatment in non-diabetic hypertensive patients
    corecore