247 research outputs found
Geochemistry and metallogeny of Neoproterozoic pyrite in oxic and anoxic sediments
The Neoproterozoic Dalradian Supergroup contains widespread diagenetic sulphides present as pyrite. The sulphides occur in both carbonaceous shales and glacial diamictites, that were deposited in relatively reducing and oxidising conditions respectively. The trace element compositions of the pyrite, and consequently the whole rock compositions, contrast between the two lithologies. The highest concentrations of selenium, tellurium and gold are all found in diamictite-hosted pyrite. The data suggest that increased mobility of these elements in oxidising conditions led to greater uptake when pyrite was precipitated. As one model for the formation of orogenic gold ore deposits assumes a sulphide-rich protolith, pyrite ultimately formed during relatively oxidising conditions could make a contribution, including the widespread pyrite precipitated during the Neoproterozoic âSnowball Earthâ glaciations
A black shale protolith for gold-tellurium mineralisation in the Dalradian Supergroup (Neoproterozoic) of Britain and Ireland
The Dalradian Supergroup of Britain and Ireland is mineralised by gold-tellurium vein deposits. The host succession includes carbonaceous, pyritic shales (pelites) which were a source of trace elements, including gold and tellurium. LA-ICP-MS mapping of pyrite crystals shows that late stages are enriched in gold, tellurium and lead, representing concentration of these elements during metamorphism and related hydrothermal activity. The sulphur isotope composition of the pyrite varies with stratigraphic position, reflecting an origin for the pyrite in the depositional environment through microbial sulphate reduction. Where pyrite was converted to pyrrhotite, trace element contents are much lower, indicating element liberation during metamorphism. These observations are consistent with a model of black shale protoliths for orogenic gold deposits
Recommended from our members
Development of a Basement Membrane Substitute Incorporated Into an Electrospun Scaffold for 3D Skin Tissue Engineering
yesA major challenge in the production of 3D tissue engineered skin is the recreation of the basement
membrane region to promote secure attachment and yet segregation of keratinocytes from
the dermal substitute impregnated with fibroblasts. We have previously shown that simple electrospun
scaffolds provide fibres on which the cells attach, proliferate, and self-sort into epithelium and
dermis. In a development of this in this study tri-layered scaffolds were then electrospun from poly
L-lactic acid and poly hydroxybutyrate-co-hydroxyvalerate. In these a central layer of the scaffolds
comprising nano-porous/nano-fibrous poly hydroxybutyrate-co-hydroxyvalerate fibres was interwoven
into the bulk micro-porous poly L-lactic acid microfibers to mimic the basement membrane.
Keratinocytes and fibroblasts seeded onto these scaffolds and cultured for 2 weeks showed that
neither cell type was able to cross the central nano-porous barrier (shown by SEM, and fluorescence
monitoring with CellTrackerâą) while the micro-fibrous poly L-lactic acid provided a scaffold
on which keratinocytes could create an epithelium and fibroblasts could create a dermal substitute
depositing collagen. Although cells did not penetrate this barrier the interaction of cells was still
evident-essential for epithelial development
Acute In Vivo Response to an Alternative Implant for Urogynecology
Purpose. To investigate in vivo the acute host response to an alternative implant designed for the treatment of stress urinary incontinence (SUI) and pelvic organ prolapse (POP).
Methods. A biodegradable scaffold was produced from poly-L-lactic acid (PLA) using the electrospinning technique. Human and rat adipose-derived stem cells (ADSCs) were isolated and characterized by fluorescence-activated cell sorting and differentiation assays. PLA scaffolds were seeded and cultured for 2 weeks with human or rat ADSCs. Scaffolds with and without human or rat ADSCs were implanted subcutaneously on the abdominal wall of rats. After 3 and 7 days, 6 animals from each group were sacrificed. Sections from each sample were analyzed by Haematoxylin and Eosin staining, Sirius red staining, and immunohistochemistry for CD68, PECAM-1, and collagen I and III.
Results. Animals responded to the scaffolds with an acute macrophage response. After 7 days of implantation, there was extensive host cell penetration, new blood vessel formation, and new collagen deposition throughout the full thickness of the samples without obvious differences between cell-containing and cell-free scaffolds.
Conclusions. The acute in vivo response to an alternative implant (both with and without cells) for the treatment of SUI and POP showed good acute integration into the host tissues
Multifunctional copper-containing mesoporous glass nanoparticles as antibacterial and proangiogenic agents for chronic wounds
The physiological wound healing process involves a cascade of events which could be affected by several factors resulting in chronic, non-healing wounds. The latter represent a great burden especially when bacterial biofilms are formed. The rise in antibiotic resistance amongst infectious microorganisms leads to the need of novel approaches to treat this clinical issue. In this context, the use of advanced biomaterials, which can enhance the physiological expression and secretion of the growth factors involved in the wound healing process, is gaining increasing attention as a robust and appealing alternative approach. Among them, mesoporous glasses are of particular interest due to their excellent textural properties and to the possibility of incorporating and releasing specific therapeutic species, such as metallic ions. One of the most attractive therapeutic ions is copper thanks to its proangiogenic and antibacterial effects. In this contribution, copper containing mesoporous glass nanoparticles were proposed as a multifunctional device to treat chronic wounds. The developed nanoparticles evidenced a very high specific surface area (740 m2/g), uniform pores of 4 nm and an almost total release of the therapeutic ion within 72 h of soaking. The produced nanoparticles were biocompatible and, when tested against Gram positive and Gram negative bacterial species, demonstrated antibacterial activity against both planktonic and biofilm bacteria in 2D cell monolayers, and in a 3D human model of infected skin. Their proangiogenic effect was tested with both the aortic ring and the chick chorioallantoic membrane assays and an increase in endothelial cell outgrowth at a concentration range between 30 and 300 ng/mL was shown. Overall, in this study biocompatible, multifunctional Cu-containing mesoporous glass nanoparticles were successfully produced and demonstrated to exert both antibacterial and proangiogenic effects
Increasing elastin fibre production in a tissue engineered mesh for pelvic floor surgery
yesPolypropylene mesh for pelvic floor surgery is associated with serious complications ( e.g. erosion). A biodegradable tissue engineered mesh composed of a polylactic acid (PLA) scaffold seeded with autologous cells is a promising alternative.
However, thus far elastin content (important for elastic recoil) in this tissue has been low. We aimed to increase elastin expression and test the resultant tensile properties
Developing wound dressings using 2-deoxy-D-Ribose to induce angiogenesis as a backdoor route for stimulating the production of vascular endothelial growth factor
2-deoxy-D-Ribose (2dDR) was first identified in 1930 in the structure of DNA and discovered as a degradation product of it later when the enzyme thymidine phosphorylase breaks down thymidine into thymine. In 2017, our research group explored the development of wound dressings based on the delivery of this sugar to induce angiogenesis in chronic wounds. In this review, we will survey the small volume of conflicting literature on this and related sugars, some of which are reported to be anti-angiogenic. We review the evidence of 2dDR having the ability to stimulate a range of pro-angiogenic activities in vitro and in a chick pro-angiogenic bioassay and to stimulate new blood vessel formation and wound healing in normal and diabetic rat models. The biological actions of 2dDR were found to be 80 to 100% as effective as VEGF in addition to upregulating the production of VEGF. We then demonstrated the uptake and delivery of the sugar from a range of experimental and commercial dressings. In conclusion, its pro-angiogenic properties combined with its improved stability on storage compared to VEGF, its low cost, and ease of incorporation into a range of established wound dressings make 2dDR an attractive alternative to VEGF for wound dressing development
Biomaterials for Pelvic Floor Reconstructive Surgery: How Can We Do Better?
Stress urinary incontinence (SUI) and pelvic organ prolapse (POP) are major health issues that detrimentally impact the quality of life of millions of women worldwide. Surgical repair is an effective and durable treatment for both conditions. Over the past two decades there has been a trend to enforce or reinforce repairs with synthetic and biological materials. The determinants of surgical outcome are many, encompassing the physical and mechanical properties of the material used, and individual immune responses, as well surgical and constitutional factors. Of the current biomaterials in use none represents an ideal. Biomaterials that induce limited inflammatory response followed by constructive remodelling appear to have more long term success than biomaterials that induce chronic inflammation, fibrosis and encapsulation. In this review we draw upon published animal and human studies to characterize the changes biomaterials undergo after implantation and the typical host responses, placing these in the context of clinical outcomes
Charged Higgs Boson Search at the Tevatron Upgrade Using Tau Polarization
We explore the prospect of charged Higgs boson search in top quark decay at
the Tevatron collider upgrade, taking advantage of the opposite states of
polarization resulting from the and decays. Methods of
distinguishing the two contributions in the inclusive 1-prong hadronic decay
channel of are suggested. The resulting signature and discovery limit of
are presented for the Tevatron upgrade as well as the Tevatron
and the Ditevatron options.Comment: 19 pages LaTeX + 6 figures (available on request
Understanding Galaxy Formation and Evolution
The old dream of integrating into one the study of micro and macrocosmos is
now a reality. Cosmology, astrophysics, and particle physics intersect in a
scenario (but still not a theory) of cosmic structure formation and evolution
called Lambda Cold Dark Matter (LCDM) model. This scenario emerged mainly to
explain the origin of galaxies. In these lecture notes, I first present a
review of the main galaxy properties, highlighting the questions that any
theory of galaxy formation should explain. Then, the cosmological framework and
the main aspects of primordial perturbation generation and evolution are
pedagogically detached. Next, I focus on the ``dark side'' of galaxy formation,
presenting a review on LCDM halo assembling and properties, and on the main
candidates for non-baryonic dark matter. It is shown how the nature of
elemental particles can influence on the features of galaxies and their
systems. Finally, the complex processes of baryon dissipation inside the
non-linearly evolving CDM halos, formation of disks and spheroids, and
transformation of gas into stars are briefly described, remarking on the
possibility of a few driving factors and parameters able to explain the main
body of galaxy properties. A summary and a discussion of some of the issues and
open problems of the LCDM paradigm are given in the final part of these notes.Comment: 50 pages, 10 low-resolution figures (for normal-resolution, DOWNLOAD
THE PAPER (PDF, 1.9 Mb) FROM http://www.astroscu.unam.mx/~avila/avila.pdf).
Lectures given at the IV Mexican School of Astrophysics, July 18-25, 2005
(submitted to the Editors on March 15, 2006
- âŠ