Evaluation of Five Conductivity Meters

Prices of conductivity meters vary widely. Here we report the response time, stability, and linearity of five meters. ConclusionsThe Hanna HI 98188 and the YSI Pro 30 are the two most expensive meters and they were the most stable. They were within 5% of the actual conductivity.The Blue Pen was consistently closer to the actual conductivity than the other two Hanna meters and at only $20 it is a cost effective meter

Bioavailable Silicon: Release Rate from Additives & Substrates

Liquid fertilization is often used to supply silicon (Si) (Boldt & Altland, 2021), but Si is minimally soluble. Media components that provide a steady release of Si are valuable. There are many options for Si media amendments, but Si release rate is not well characterized. Our objective was to quantify Si release from media components to achieve a steady-state Si release as mono-silicic acid (H4SiO4) over time

Studies on maximum yield of wheat for the controlled environments of space

The economic feasibility of using food-producing crop plants in a closed ecological Life-Support System (CELSS) will ultimately depend on the energy and area (or volume) required to provide the nutritional requirements for each person. Energy and area requirements are, to some extent, inversely related; that is, an increased energy input results in a decreased area requirement and vice versa. A major goal of the research effort was to determine the controlled-environment good-production efficiency of wheat per unit area, per unit time, and per unit energy input

Salinity Reduces the Forage Quality of Forage Kochia: A Halophytic Chenopodiaceae Shrub

Forage kochia (Bassia prostrata [L.] A.J. Scott) is a perennial, halophytic Chenopodiaceae shrub adapted to semiarid rangelands and steppes. It is noted for its ability to produce edible forage in saline environments, but the effect of salinity on its nutritive value has not been determined. Therefore, this study evaluated the dose-response of increasing salinity on the forage quality of forage kochia and Gardner’s saltbush (Atriplex gardneri [Moq.] D. Dietr., a chenopod forage shrub indigenous to the United States). Individual plants were evaluated in hydroponics for 28 days at 0, 150, 300, and 600 mM NaCl. Salt from accumulated ions, minerals, and forage nutritive value were determined using ground shoot samples. Analysis of forage nutritive value is problematic in plants with high salt concentrations, so neutral detergent fiber (NDF) and in vitro true digestibility (IVTD) were also predicted on an ash-corrected dry matter (DM) basis (NDFcorrected and IVTDcorrected). Forage kochia exhibited a dose-response for salt concentration, IVTDcorrected, and crude protein (CP) as salinity increased. Salt concentrations increased to 19% of DM at 600 mM NaCl, which may reduce voluntary intake by ruminants grazing forage kochia. Results indicated that uncorrected IVTD estimates were inflated as forage kochia IVTDcorrected decreased from 65% to 56% with the major change between 300 and 600 mM NaCl. Crude protein did not differ between two forage kochia cultivars but decreased from 26% to 15% between 0 and 600 mM NaCl, whereas Gardner’s saltbush CP decreased by only five percentage points as salinity increased. Nonetheless, despite the greater CP sensitivity to salinity level, forage kochia salt concentration was less and digestibility and metabolizable energy (ME) were greater than Gardner’s saltbush. Overall, salinity reduced the forage quality of forage kochia, though not as dramatically as for Gardner’s saltbush, thus supporting use of forage kochia to improve the forage base of saline rangelands

\u27USU-Apogee\u27 Wheat - Registration

\u27USU-Apogee\u27 is a full-dwarf hard red spring wheat (Triticum aestivum L.) (NSSL Reg. no. 331390.01; PI 592742) cultivar developed for high yields in controlled environments. USU-Apogee was developed by the Utah Agricultural Experiment Station in cooperation with the National Aeronautics and Space Administration and released in April 1996. NASA is interested in improved food crops for bioregenerative life support systems in space. Apogee is the point in an orbit farthest from the earth. USU-Apogee is a shorter, higher yielding alternative to \u27Yecora Rojo\u27 and \u27Veery-10\u27, the short field cultivars previously selected for use in controlled environments (Bugbee and Salisbury, 1988). USU-Apogee (45-50 cm tall, depending on temperature) is 10 to 15 cm shorter than Yecora Rojo and 2 to 5 cm shorter than Veery-10. USU-Apogee was also selected for resistance to the calcium-induced leaf tip necrosis that occurs in controlled-environments

Polyethylene thickness is a risk factor for wear necessitating insert exchange

PURPOSE: The aim of this observational study was to investigate the optimal minimal polyethylene (PE) thickness in total knee arthroplasty (TKA) and identify other risk factors associated with revision of the insert due to wear. METHODS: A total of 84 TKA were followed for 11-16 years. All patients received the same prosthesis design (Interax; Howmedica/ Stryker) with halfbearings: separate PE-inserts medially and laterally. Statistical analysis comprised Cox-regression to correct for confounding. RESULTS: Eight knees (9.5%) had been revised due to thinning inserts and an additional patient is scheduled for revision. PE thickness, diagnosis, BMI and weight are risk factors for insert exchange. For each millimetre decrease in PE thickness, the risk of insert exchange increases 3.0 times, which remains after correction for age, gender, weight, diagnosis and femoral-tibial angle. Insert exchange was 4.73 times more likely in OA-patients compared to RA-patients. For every unit increase in BMI and weight the risk for insert exchange increases 1.40 times and 1.14 times, respectively. CONCLUSIONS: In conclusion we therefore advise against the use of thin PE inserts in modular TKA and recommend PE inserts with a minimal 8-mm thickness.Optimising joint reconstruction management in arthritis and bone tumour patient

Genetic basis of the very short life cycle of ‘Apogee’ wheat

Background: ‘Apogee’ has a very short life cycle among wheat cultivars (flowering 25 days after planting under a long day and without vernalization), and it is a unique genetic material that can be used to accelerate cycling breeding lines. However, little is known about the genetic basis of the super-short life of Apogee wheat. Results: In this study, Apogee was crossed with a strong winter wheat cultivar ‘Overland’, and 858 F2 plants were generated and tested in a greenhouse under constant warm temperature and long days. Apogee wheat was found to have the early alleles for four flowering time genes, which were ranked in the order of vrn-A1 \u3e VRN-B1 \u3e vrn- D3 \u3e PPD-D1 according to their effect intensity. All these Apogee alleles for early flowering showed complete or partial dominance effects in the F2 population. Surprisingly, Apogee was found to have the same alleles at vrn-A1a and vrn-D3a for early flowering as observed in winter wheat cultivar ‘Jagger.’ It was also found that the vrn-A1a gene was epistatic to VRN-B1 and vrn-D3. The dominant vrn-D3a alone was not sufficient to cause the transition from vegetative to reproductive development in winter plants without vernalization but was able to accelerate flowering in those plants that carry the vrn-A1a or Vrn-B1 alleles. The genetic effects of the vernalization and photoperiod genes were validated in Apogee x Overland F3 populations. Conclusion: VRN-A1, VRN-B1, VRN-D3, and PPD-D1 are the major genes that enabled Apogee to produce the very short life cycle. This study greatly advanced the molecular understanding of the multiple flowering genes under different genetic backgrounds and provided useful molecular tools that can be used to accelerate winter wheat breeding schemes

An Expert Consensus Statement on the Management of Large Chondral and Osteochondral Defects in the Patellofemoral Joint

© The Author(s) 2020. Background: Cartilage lesions of the patellofemoral joint constitute a frequent abnormality. Patellofemoral conditions are challenging to treat because of complex biomechanics and morphology. Purpose: To develop a consensus statement on the functional anatomy, indications, donor graft considerations, surgical treatment, and rehabilitation for the management of large chondral and osteochondral defects in the patellofemoral joint using a modified Delphi technique. Study Design: Consensus statement. Methods: A working group of 4 persons generated a list of statements related to the functional anatomy, indications, donor graft considerations, surgical treatment, and rehabilitation for the management of large chondral and osteochondral defects in the patellofemoral joint to form the basis of an initial survey for rating by a group of experts. The Metrics of Osteochondral Allografts (MOCA) expert group (composed of 28 high-volume cartilage experts) was surveyed on 3 occasions to establish a consensus on the statements. In addition to assessing agreement for each included statement, experts were invited to propose additional statements for inclusion or to suggest modifications of existing statements with each round. Predefined criteria were used to refine statement lists after each survey round. Statements reaching a consensus in round 3 were included within the final consensus document. Results: A total of 28 experts (100% response rate) completed 3 rounds of surveys. After 3 rounds, 36 statements achieved a consensus, with over 75% agreement and less than 20% disagreement. A consensus was reached in 100.00% of the statements relating to functional anatomy of the patellofemoral joint, 88.24% relating to surgical indications, 100.00% relating to surgical technical aspects, and 100.00% relating to rehabilitation, with an overall consensus of 95.5%. Conclusion: This study established a strong expert consensus document relating to the functional anatomy, surgical indications, donor graft considerations for osteochondral allografts, surgical technical aspects, and rehabilitation concepts for the management of large chondral and osteochondral defects in the patellofemoral joint. Further research is required to clinically validate the established consensus statements and better understand the precise indications for surgery as well as which techniques and graft processing/preparation methods should be used based on patient- and lesion-specific factors