Photoemission yield and the electron escape depth determination in metal-oxide-semiconductor structures on N+-type and P+-type silicon substrates

This article gives a quantitative analysis of electron photoemission yield from N+-type and P+-type substrates of MOS structures. Based on this analysis, a method is presented to estimate both the scattering length, l, of electrons in the image force potential well and of photoelectron escape depth, x(esc), from the semiconductor substrate. This method was used to estimate the scattering length and the escape depth from the substrates of Al-SiO2-Si (N+-type and P+-type) structures. It was found that for N+-type substrate structures the scattering in the image force potential well has a dominating influence on the photoemission yield while for P+-type substrate structures both the scattering in the image force potential well and the photoemission from the subsurface regions of the photoemitter play important roles. It was found that the scattering length in the image force potential well was equal to l = 6.7-6.9 nm for structures on both N+ and P+ substrates, produced in the same processing conditions. For structures on P+ substrates, the escape depth was found to be equal to x(esc) = 8-9 nm. The scattering length, l, determined in this study is considerably larger than the one reported previously (l = 3.4 nm) for similar MOS structures. The escape depth x(esc) determined in this study is also considerably larger than the escape depth determined previously (x(esc) = 1.2-2.5 nm) for the external photoemission from uncovered silicon surfaces into vacuum

Multisensor navigation systems: a remedy for GNSS vulnerabilities?

Space-based positioning, navigation, and timing (PNT) technologies, such as the global navigation satellite systems (GNSS) provide position, velocity, and timing information to an unlimited number of users around the world. In recent years, PNT information has become increasingly critical to the security, safety, and prosperity of the World's population, and is now widely recognized as an essential element of the global information infrastructure. Due to its vulnerabilities and line-of-sight requirements, GNSS alone is unable to provide PNT with the required levels of integrity, accuracy, continuity, and reliability. A multisensor navigation approach offers an effective augmentation in GNSS-challenged environments that holds a promise of delivering robust and resilient PNT. Traditionally, sensors such as inertial measurement units (IMUs), barometers, magnetometers, odometers, and digital compasses, have been used. However, recent trends have largely focused on image-based, terrain-based and collaborative navigation to recover the user location. This paper offers a review of the technological advances that have taken place in PNT over the last two decades, and discusses various hybridizations of multisensory systems, building upon the fundamental GNSS/IMU integration. The most important conclusion of this study is that in order to meet the challenging goals of delivering continuous, accurate and robust PNT to the ever-growing numbers of users, the hybridization of a suite of different PNT solutions is required

Synthesis of magnetic fe3o4/znwo4 and fe3o4/znwo4/cevo4 nanoparticles: The photocatalytic effects on organic pollutants upon irradiation with uv-vis light

Magnetic Fe3O4/ZnWO4 and Fe3O4/ZnWO4/CeVO4 nanoparticles with different molar ratios of CeVO4 to other inorganic components were synthesized through co-precipitation with a sonochemical-assisted method. X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, vibrating sample magnetometry, and scanning electron microscopy (SEM) methods were used for the physico�chemical characterization of the obtained nanoparticles. As shown in the SEM images, the average sizes of the Fe3O4 /ZnWO4 and Fe3O4 /ZnWO4 /CeVO4 nanoparticles that formed aggregates were approximately 50�70 nm and 80�100 nm, respectively. The photocatalytic performance of these nanoparticles was examined by measuring methylene blue degradation under visible light (assisted by H2O2). The sample with a mass ratio of 1:2:1 (Fe3O4/ZnWO4/CeVO4, S4) exhibited optimal photocatalytic performance, and thus this sample was subsequently used for the photodegradation of different organic pollutants upon irradiation with ultraviolet (UV) and visible light. Approximately 90 and 70 degradation of methyl violet and methylene blue, respectively, was observed after visible light irradiation. Additionally, the mechanism of the photocatalytic reaction was investigated by measuring ·OH release under UV light in a system with terephthalic acid and by measuring the release of·O2 �,·OH, and hole scavengers. © 2020 by the authors. Licensee MDPI, Basel, Switzerland

Adenylate Nucleotides and 2,3-Biphosphoglycerate Concentration in Erythrocytes of Growing Wielkopolska Stallions

The aim of this study was to examine the relationships between the concentrations of adenylate nucleotides (ATP, ADP, AMP), total nucleotide pool (TAN), adenylate energy charge (AEC) and 2,3-biphosphoglycerate (2,3-BPG) in the erythrocytes of young horses in the period of their rapid growth and development. The studies were conducted on 10 young Wielkopolska breed stallions for two years; Group A: 1-month-old, Group B: 3-month-old, Group C: 6-month-old, Group D: 1-year-old, and Group E: 2-year-old. ATP, ADP and AMP concentrations in the erythrocytes were determined by HPLC. 2,3-BPG was determined using the Calbiochem USA kit. We observed that erythrocyte ATP, ADP, AMP and TAN concentrations significantly decreased with age (p p < 0.05). A significant correlation was also found between ATP concentration and AEC values (except 12 month-old stallions). Moreover, an age-dependent negative correlation between ATP and 2,3-BPG (r = -0.81) was found. The conclusion is that the adenylate energy charge and erythrocyte 2,3-BPG variables in the Wielkopolska stallions mainly depend on age, thus warranting the use of specific age-related reference values for this breed's foals

Preparation and characterization of magnetic Fe3O4/CdWO4 and Fe3O4/CdWO4/PrVO4 nanoparticles and investigation of their photocatalytic and anticancer properties on PANC1 cells

Fe3O4/CdWO4 and Fe3O4/CdWO4/PrVO4 magnetic nanoparticles were prepared at different molar ratios of PrVO4 to previous layers (Fe3O4/CdWO4) via the co-precipitation method assisted by a sonochemical procedure, in order to investigate the photocatalytic performance of these systems and their cytotoxicity properties. The physico-chemical properties of these magnetic nanoparticles were determined via several experimental methods: X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier transformation infrared spectroscopy and ultraviolet-visible diffuse reflection spectroscopy, using a vibrating sample magnetometer and a scanning electron microscope. The average sizes of these nanoparticles were found to be in the range of 60-100 nm. The photocatalytic efficiency of the prepared nanostructures was measured by methylene blue degradation under visible light (assisted by H2O2). The magnetic nanosystem with a 1:2:1 ratio of three oxide components showed the best performance by the degradation of ca. 70 after 120 min of exposure to visible light irradiation. Afterwards, this sample was used for the photodegradation of methyl orange, methyl violet, fenitrothion, and rhodamine-B pollutants. Finally, the mechanism of the photocatalytic reaction was examined by releasing �OH under UV light in a system including terephthalic acid, as well as O2-, OH, and hole scavengers. Additionally, the cytotoxicity of each synthesized sample was assessed using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay against the human cell line PANC1 (cancer), and its IC50 was approximately 125 mg/L. © 2019 by the authors

Safety, tolerability, and impact on allergic inflammation of autologous E.coli autovaccine in the treatment of house dust mite asthma - a prospective open clinical trial

Background: Asthma is increasing worldwide and results from a complex immunological interaction between genetic susceptibility and environmental factors. Autovaccination with E. coli induces a strong TH-1 immune response, thus offering an option for the treatment of allergic diseases. Methods: Prospective open trial on safety, tolerability, and impact on allergic inflammation of an autologous E.coli autovaccine in intermittent or mild persistent house dust mite asthma. Determination of exhaled nitric monoxide (eNO) before and after bronchial mite challenge initially and after nine months of autovaccination. Results: Median eNO increase after autovaccination was significantly smaller (from 27.3 to 33.8 ppb; p=0.334) compared to initial values (from 32.6 to 42.2 ppb; p=0.046) (p=0.034). In nine subjects and a total of 306 injections, we observed 101 episodes of local erythema (33.3%; median of maximal diameter 2.5 cm), 95 episodes of local swelling (31.1%; median of maximal diameter 3 cm), and 27 episodes of local pain (8.8%). Four subjects reported itching at the injection site with a total of 30 episodes (9.8%). We observed no serious adverse events. All organ functions (inclusive electrocardiogramm) and laboratory testing of the blood (clinical chemistry, hematology) and the urine (screening test, B-microglobuline) were within normal limits. Vital signs undulated within the physiological variability. Conclusion: The administration of autologous autovacine for the treatment of house dust mite asthma resulted in a reduction of the eNO increase upon bronchial mite challenge. In nine subjects and 306 injections, only a few mild local reactions and no systemic severe adverse events were observed. EudraCT Nr. 2005-005534-12 ClinicalTrials.gov ID NCT0067720

An analytical study of PPP-RTK corrections: precision, correlation and user-impact

PPP-RTK extends the PPP concept by providing single-receiver users, next to orbits and clocks, also information about the satellite phase and code biases, thus enabling single-receiver ambiguity resolution. It is the goal of the present contribution to provide an analytical study of the quality of the PPP-RTK corrections as well as of their impact on the user ambiguity resolution performance. We consider the geometry-free and the geometry-based network derived corrections, as well as the impact of network ambiguity resolution on these corrections. Next to the insight that is provided by the analytical solutions, the closed form expressions of the variance matrices also demonstrate how the corrections depend on network parameters such as number of epochs, number of stations, number of satellites, and number of frequencies. As a result we are able to describe in a qualitative sense how the user ambiguity resolution performance is driven by the data from the different network scenarios

Synthesis of magnetic fe3o4/znwo4 and fe3o4/znwo4/cevo4 nanoparticles: The photocatalytic effects on organic pollutants upon irradiation with uv-vis light

Magnetic Fe3O4/ZnWO4 and Fe3O4/ZnWO4/CeVO4 nanoparticles with different molar ratios of CeVO4 to other inorganic components were synthesized through co-precipitation with a sonochemical-assisted method. X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, vibrating sample magnetometry, and scanning electron microscopy (SEM) methods were used for the physico�chemical characterization of the obtained nanoparticles. As shown in the SEM images, the average sizes of the Fe3O4 /ZnWO4 and Fe3O4 /ZnWO4 /CeVO4 nanoparticles that formed aggregates were approximately 50�70 nm and 80�100 nm, respectively. The photocatalytic performance of these nanoparticles was examined by measuring methylene blue degradation under visible light (assisted by H2O2). The sample with a mass ratio of 1:2:1 (Fe3O4/ZnWO4/CeVO4, S4) exhibited optimal photocatalytic performance, and thus this sample was subsequently used for the photodegradation of different organic pollutants upon irradiation with ultraviolet (UV) and visible light. Approximately 90 and 70 degradation of methyl violet and methylene blue, respectively, was observed after visible light irradiation. Additionally, the mechanism of the photocatalytic reaction was investigated by measuring ·OH release under UV light in a system with terephthalic acid and by measuring the release of·O2 �,·OH, and hole scavengers. © 2020 by the authors. Licensee MDPI, Basel, Switzerland

Performance of ionospheric maps in support of long baseline GNSS kinematic positioning at low latitudes

Ionospheric scintillation occurs mainly at high and low latitude regions of the Earth and may impose serious degradation on GNSS (Global Navigation Satellite System) functionality. The Brazilian territory sits on one of the most affected areas of the globe, where the ionosphere behaves very unpredictably, with strong scintillation frequently occurring in the local postsunset hours. The correlation between scintillation occurrence and sharp variations in the ionospheric total electron content (TEC) in Brazil is demonstrated in Spogli et al. (2013). The compounded effect of these associated ionospheric disturbances on long baseline GNSS kinematic positioning is studied in this paper, in particular when ionospheric maps are used to aid the positioning solution. The experiments have been conducted using data from GNSS reference stations in Brazil. The use of a regional TEC map generated under the CALIBRA (Countering GNSS high-Accuracy applications Limitations due to Ionospheric disturbances in BRAzil) project, referred to as CALIBRA TEC map (CTM), was compared to the use of the Global Ionosphere Map (GIM), provided by the International GNSS Service (IGS). Results show that the use of the CTM greatly improves the kinematic positioning solution as compared with that using the GIM, especially under disturbed ionospheric conditions. Additionally, different hypotheses were tested regarding the precision of the TEC values obtained from ionospheric maps, and its effect on the long baseline kinematic solution evaluated. Finally, this study compares two interpolation methods for ionospheric maps, namely, the Inverse Distance Weight and the Natural Neighbor

Ultrahigh-power micrometre-sized supercapacitors based on onion-like carbon

Electrochemical capacitors, also called supercapacitors, store energy in two closely spaced layers with opposing charges, and are used to power hybrid electric vehicles, portable electronic equipment and other devices¹. By offering fast charging and discharging rates, and the ability to sustain millions of ²⁻⁵, electrochemical capacitors bridge the gap between batteries, which offer high energy densities but are slow, and conventional electrolytic capacitors, which are fast but have low energy densities. Here, we demonstrate microsupercapacitors with powers per volume that are comparable to electrolytic capacitors, capacitances that are four orders of magnitude higher, and energies per volume that are an order of magnitude higher. We also measured discharge rates of up to 200 V s⁻¹, which is three orders of magnitude higher than conventional supercapacitors. The microsupercapacitors are produced by the electrophoretic deposition of a several micrometre-thick layer of nanostructured carbon onions⁶‚⁷ with diameters of 6-7 nm. Integration of these nanoparticles in a microdevice with a high surface-to-volume ratio, without the use of organic binders and polymer separators, improves performance because of the ease with which ions can access the active material. Increasing the energy density and discharge rates of supercapacitors will enable them to compete with batteries and conventional electrolytic capacitors in a number of applications