Capacitor-type micrometeoroid detectors

The metal oxide semiconductor (MOS) capacitor micrometeroid detector consists of a thin dielectric capacitor fabricated on a silicon wafer. In operation, the device is charged to a voltage level sufficiently near breakdown that micrometeoroid impacts will cause dielectric deformation or heating and subsequent arc-over at the point of impact. Each detector is capable of recording multiple impacts because of the self-healing characteristics of the device. Support instrumentation requirements consist of a voltage source and pulse counters that monitor the pulse of recharging current following every impact. An investigation has been conducted in which 0.5 to 5 micron diameter carbonized iron spheres traveling at velocities of 4 to 10 Km/sec were impacted on to detectors with either a dielectric thickness of 0.4 or 1.0 micron. This study demonstrated that an ion microprobe tuned to sufficiently high resolution can detect Fe remaining on the detector after the impact. Furthermore, it is also possible to resolve Fe ion images free of mass interferences from Si, for example, giving its spatial distribution after impact. Specifically this technique has shown that significant amounts of impacting particles remain in the crater and near it which can be analyzed for isotopic content. Further testing and calibration could lead to quantitive analysis. This study has shown that the capacitor type micrometeroid detector is capable of not only time and flux measurements but can also be used for isotopic analysis

A Universal Temperature Profile for Galaxy Clusters

We investigate the predicted present-day temperature profiles of the hot, X-ray emitting gas in galaxy clusters for two cosmological models - a current best-guess LCDM model and standard cold dark matter (SCDM). Our numerically-simulated "catalogs" of clusters are derived from high-resolution (15/h kpc) simulations which make use of a sophisticated, Eulerian-based, Adaptive Mesh-Refinement (AMR) code that faithfully captures the shocks which are essential for correctly modelling cluster temperatures. We show that the temperature structure on Mpc-scales is highly complex and non-isothermal. However, the temperature profiles of the simulated LCDM and SCDM clusters are remarkably similar and drop-off as $T +AFw-propto (1+-r/a_x)^{-+AFw-delta}$ where $a_x +AFw-sim r_{vir}/1.5$ and $+AFw-delta +AFw-sim 1.6$. This decrease is in good agreement with the observational results of Markevitch et al.(1998) but diverges, primarily in the innermost regions, from their fit which assumes a polytropic equation of state. Our result is also in good agreement with a recent sample of clusters observed by BeppoSAX though there is some indication of missing physics at small radii ($r<0.2 r_{vir}$). We discuss the interpretation of our results and make predictions for new x-ray observations that will extend to larger radii than previously possible. Finally, we show that, for $r>0.2 r_{vir}$, our universal temperature profile is consistent with our most recent simulations which include both radiative cooling and supernovae feedback.Comment: 8 pages, 6 figures, accepted for publication in ApJ, full-page version of Fig. 2 at http://www.cita.utoronto.ca/+AH4-cloken/PAPERS/UTP/f2.ep

Explaining the entropy excess in clusters and groups of galaxies without additional heating

The X-ray luminosity and temperature of clusters and groups of galaxies do not scale in a self-similar manner. This has often been interpreted as a sign that the intracluster medium has been substantially heated by non-gravitational sources. In this paper, we propose a simple model which, instead, uses the properties of galaxy formation to explain the observations. Drawing on available observations, we show that there is evidence that the efficiency of galaxy formation was higher in groups than in clusters. If confirmed, this would deplete the low-entropy gas in groups, increase their central entropy and decrease their X-ray luminosity. A simple, empirical, hydrostatic model appears to match both the luminosity-temperature relation of clusters and properties of their internal structure as well.Comment: 5 pages, 4 figures, accepted in ApJL; added one reference, otherwise unchange

Progression from ocular hypertension to visual field loss in the English hospital eye service

Background There are more than one million National Health Service visits in England and Wales each year for patients with glaucoma or ocular hypertension (OHT). With the ageing population and an increase in optometric testing, the economic burden of glaucoma-related visits is predicted to increase. We examined the conversion rates of OHT to primary open-angle glaucoma (POAG) in England and assessed factors associated with risk of conversion. Methods Electronic medical records of 45 309 patients from five regionally different glaucoma clinics in England were retrospectively examined. Conversion to POAG from OHT was defined by deterioration in visual field (two consecutive tests classified as stage 1 or worse as per the glaucoma staging system 2). Cox proportional hazards models were used to examine factors (age, sex, treatment status and baseline intraocular pressure (IOP)) associated with conversion. Results The cumulative risk of conversion to POAG was 17.5% (95% CI 15.4% to 19.6%) at 5 years. Older age (HR 1.35 per decade, 95% CI 1.22 to 1.50, p<0.001) was associated with a higher risk of conversion. IOP-lowering therapy (HR 0.45, 95% CI 0.35 to 0.57, p<0.001) was associated with a lower risk of conversion. Predicted 5-year conversion rates for treated and untreated groups were 14.0% and 26.9%, respectively. Conclusion Less than one-fifth of OHT patients managed in glaucoma clinics in the UK converted to POAG over a 5-year period, suggesting many patients may require less intensive follow-up. Our study provides real-world evidence for the efficacy of current management (including IOP-lowering treatment) at reducing risk of conversion

Simulating Star Formation and Feedback in Galactic Disk Models

We use a high-resolution grid-based hydrodynamics method to simulate the multi-phase interstellar medium in a Milky Way-size quiescent disk galaxy. The models are global and three-dimensional, and include a treatment of star formation and feedback. We examine the formation of gravitational instabilities and show that a form of the Toomre instability criterion can successfully predict where star formation will occur. Two common prescriptions for star formation are investigated. The first is based on cosmological simulations and has a relatively low threshold for star formation, but also enforces a comparatively low efficiency. The second only permits star formation above a number density of 1000 cm^-3 but adopts a high efficiency. We show that both methods can reproduce the observed slope of the relationship between star formation and gas surface density (although at too high a rate for our adopted parameters). A run which includes feedback from type II supernovae is successful at driving gas out of the plane, most of which falls back onto the disk. This feedback also substantially reduces the star formation rate. Finally, we examine the density and pressure distribution of the ISM, and show that there is a rough pressure equilibrium in the disk, but with a wide range of pressures at a given location (and even wider for the case including feedbackComment: 14 pages, 12 figures, accepted to Astrophysical Journa

Phalaris staggers : prevention by cobalt bullets

FARMERS in the south west of Western Australia are familiar with the use of cobalt for the prevention of ill-thrift and deaths due to cobalt deficiency in sheep and cattle. Less common is the use of cobalt for the prevention of chronic phalaris poisoning, known as phalaris staggers. This condition is well known in eastern Australia, but only isolated cases have been recorded in W.A. no doubt due to the relatively small area sown to phalaris in this state

Topographic determinants of foot and mouth disease transmission in the UK 2001 epidemic

Background A key challenge for modelling infectious disease dynamics is to understand the spatial spread of infection in real landscapes. This ideally requires a parallel record of spatial epidemic spread and a detailed map of susceptible host density along with relevant transport links and geographical features. Results Here we analyse the most detailed such data to date arising from the UK 2001 foot and mouth epidemic. We show that Euclidean distance between infectious and susceptible premises is a better predictor of transmission risk than shortest and quickest routes via road, except where major geographical features intervene. Conclusion Thus, a simple spatial transmission kernel based on Euclidean distance suffices in most regions, probably reflecting the multiplicity of transmission routes during the epidemic