Combining pressing and alkaline extraction to increase protein yield from Ulva fenestrata biomass

Many seaweed species have a high production potential and attract interest as future protein sources. A high fiber and ash content, however, demand extraction of the protein to improve its digestibility and protein utilization in food or feed. This study explores three different approaches for protein extraction from Ulva fenestrata in order to maximize the protein extraction yield. Soluble protein was recovered either by mechanical pressing or by homogenization and osmotic shock of the biomass followed by alkaline extraction. The soluble protein was then concentrated by isoelectric precipitation. A combined procedure was carried out by pressing the biomass and following subjecting the residual pulp fraction to homogenization, osmotic shock and alkaline extraction. The three methods were ranked as follows with respect to protein extraction yield (as % of biomass protein); the combined method (23.9 \ub1 0.3%)> the alkaline extraction (6.8 \ub1 0.2%)> mechanical pressing (5.0 \ub1 0.2%). The significant increase when combining the methods was ascribed to a high precipitation yield after alkaline extraction of the pulp, hypothesized to be due to a reduced conductivity of the alkali-soluble protein fraction when derived from pulp rather than whole biomass

Ulva fenestrata protein – Comparison of three extraction methods with respect to protein yield and protein quality

Seaweed is gaining attention as a possible alternative and sustainable source of proteins. This study investigates three protein extraction methods and their effect on protein yield and quality when applied to Ulva fenestrata. Two of the methods included alkaline extractions (pH-shifts); one version solubilizing the proteins at pH 8.5 and one solubilizing them at pH 8.5 followed by pH 12 (pH 8.5 + 12). The third method was a mechanical pressing, using a double screw press. All extraction methods were followed by isoelectric precipitation to concentrate the proteins. Extraction at pH 8.5 gave the significantly highest total protein yield after the isoelectric precipitation, followed by extraction at pH 8.5 + 12 and lastly mechanical extraction gave the lowest yield. Proteins extracted with both alkaline methods had a significantly higher solubility at pH 7 and pH 9, compared to proteins from the mechanical pressing. There were no significant differences between the three methods in total D/L-amino acid ratio. Amino acid cross-links measured as lysinoalanine (LAL) and lanthionine (LAN) where found in significantly higher amounts in alkali-extracted proteins compared to mechanically extracted, however not to a degree that expect to compromise functional or nutritional quality. Further, no significant difference in protein in vitro digestibility was found between extraction methods. In conclusion, results indicated that protein extraction at pH 8.5 can be recommended, especially regarding total protein yield and solubility of the final protein extract

An objective framework to test the quality of candidate indicators of good environmental status

This is the final version. Available from the publisher via the DOI in this record.Large efforts are on-going within the EU to prepare the Marine Strategy Framework Directive's (MSFD) assessment of the environmental status of the European seas. This assessment will only be as good as the indicators chosen to monitor the 11 descriptors of good environmental status (GEnS). An objective and transparent framework to determine whether chosen indicators actually support the aims of this policy is, however, not yet in place. Such frameworks are needed to ensure that the limited resources available to this assessment optimize the likelihood of achieving GEnS within collaborating states. Here, we developed a hypothesis-based protocol to evaluate whether candidate indicators meet quality criteria explicit to the MSFD, which the assessment community aspires to. Eight quality criteria are distilled from existing initiatives, and a testing and scoring protocol for each of them is presented. We exemplify its application in three worked examples, covering indicators for three GEnS descriptors (1, 5, and 6), various habitat components (seaweeds, seagrasses, benthic macrofauna, and plankton), and assessment regions (Danish, Lithuanian, and UK waters). We argue that this framework provides a necessary, transparent and standardized structure to support the comparison of candidate indicators, and the decision-making process leading to indicator selection. Its application could help identify potential limitations in currently available candidate metrics and, in such cases, help focus the development of more adequate indicators. Use of such standardized approaches will facilitate the sharing of knowledge gained across the MSFD parties despite context-specificity across assessment regions, and support the evidence-based management of European seas.European Union: 7th Framework ProgrammeNatural Environment Research Council (NERC)UK Department for Environment, Food and Rural Affair

A leucine aminopeptidase is involved in kinetoplast DNA segregation in <i>Trypanosoma brucei</i>

The kinetoplast (k), the uniquely packaged mitochondrial DNA of trypanosomatid protists is formed by a catenated network of minicircles and maxicircles that divide and segregate once each cell cycle. Although many proteins involved in kDNA replication and segregation are now known, several key steps in the replication mechanism remain uncharacterized at the molecular level, one of which is the nabelschnur or umbilicus, a prominent structure which in the mammalian parasite Trypanosoma brucei connects the daughter kDNA networks prior to their segregation. Here we characterize an M17 family leucyl aminopeptidase metalloprotease, termed TbLAP1, which specifically localizes to the kDNA disk and the nabelschur and represents the first described protein found in this structure. We show that TbLAP1 is required for correct segregation of kDNA, with knockdown resulting in delayed cytokinesis and ectopic expression leading to kDNA loss and decreased cell proliferation. We propose that TbLAP1 is required for efficient kDNA division and specifically participates in the separation of daughter kDNA networks

Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development

An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L-H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts

Lawson criterion for ignition exceeded in an inertial fusion experiment

For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition as a proof of principle of various fusion concepts. Following the Lawson criterion, an ignited plasma is one where the fusion heating power is high enough to overcome all the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop with rapidly increasing temperature. In inertially confined fusion, ignition is a state where the fusion plasma can begin "burn propagation" into surrounding cold fuel, enabling the possibility of high energy gain. While "scientific breakeven" (i.e., unity target gain) has not yet been achieved (here target gain is 0.72, 1.37 MJ of fusion for 1.92 MJ of laser energy), this Letter reports the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce capsule gain (here 5.8) and reach ignition by nine different formulations of the Lawson criterion