14,315 research outputs found
Effect of fluoride on the calcification of allogenic bone implants in rats
Thesis (M.Sc.D.)--Boston University School of Graduate Dentistry, 1974. Periodontics.Bibliography included.In twenty-five (25) male adult rats which had decalcified
allogenic bone implants placed in mid-fibular gaps
and kept on a low-fluoride casein diet (1 ppm- fluoride),
the addition of 25 p.p.m. fluoride to the drinking water
did not show any direct detectable relationship to the
mg % calcium in the ashed implants or in ashed adjacent
tibial bone, nor in the percent ash content.
Neither did the fluoride enhance or inhibit the success
of the implants. For all implants did calcify and
only one control mid-fibular gap closed on its own. It
is our conclusion that fluoride at levels used in this
experiment have no effect on calcification of allogenic
bone implants
The morphology and taxonomy of Cycadolepis jenkinsiana and Zamites recta from the Lower Cretaceous Kirkwood Formation of South Africa
Main articleCycodolepis jenkinsiana, a bennettitalean scale-leaf, is shown to have had two types of venation, is shown not to be covered by hairs as had previously been thought and has a strong association with Zamites recta, the most common vegetative leaf species to be found in the Kirkwood Formation of the Algoa Basin. The morphology of Zamites recta is reasonably clear and this species has definite affinities with the Bennettitales based on its gross morphology and a single microscopic character, i.e. sinuous epidermal cell walls of the pinnae. Zamites morrisii is shown to be only a variant of the better represented Z. recta. Two of the previously described species of Zamites, Z. rubidgei and Z. africana are excluded from Zamites.Non
Catalyst for carbon monoxide oxidation
A catalyst is disclosed for the combination of CO and O2 to form CO2, which includes a platinum group metal (e.g., platinum); a reducable metal oxide having multiple valence states (e.g., SnO2); and a compound which can bind water to its structure (e.g., silica gel). This catalyst is ideally suited for application to high-powered pulsed, CO2 lasers operating in a sealed or closed-cycle condition
`t Hooft Anomaly Matching for QCD
I present a set of theories which display non-trivial `t Hooft anomaly
matching for QCD with flavors. The matching theories are non-Abelian gauge
theories with "dual" quarks and baryons, rather than the purely confining
theories of baryons that `t Hooft originally searched for. The matching gauge
groups are required to have an dimensional representation. Such a
correspondence is reminiscent of Seiberg's duality for supersymmetric (SUSY)
QCD, and these theories are candidates for non-SUSY duality. However anomaly
matching by itself is not sufficiently restrictive, and duality for QCD cannot
be established at present. At the very least, the existence of multiple anomaly
matching solutions should provide a note of caution regarding conjectured
non-SUSY dualities.Comment: 8 pages, LaTeX, version to be published in PR
Deposition of steeply infalling debris around white dwarf stars
High-metallicity pollution is common in white dwarf (WD) stars hosting remnant planetary systems. However, they rarely have detectable debris accretion discs, possibly because much of the influx is fast steeply-infalling debris in star-grazing orbits, producing a more tenuous signature than a slowly accreting disk. Processes governing such deposition between the Roche radius and photosphere have so far received little attention and we model them here analytically by extending recent work on sun-grazing comets to WD systems. We find that the evolution of cm-to-km size (a_0) infallers most strongly depends on two combinations of parameters, which effectively measure sublimation rate and binding strength. We then provide an algorithm to determine the fate of infallers for any WD, and apply the algorithm to four limiting combinations of hot versus cool (young/old) WDs with snowy (weak, volatile) versus rocky (strong, refractory) infallers. We find: (i) Total sublimation above the photosphere befalls all small infallers across the entire WD temperature (T_WD) range, the threshold size rising with T_WD and 100X larger for rock than snow. (ii) All very large objects fragment tidally regardless of T_WD: for rock, a_0 >= 10^5 cm; for snow, a_0 >= 10^3 -- 3x10^4 cm across all WD cooling ages. (iii) A considerable range of a_0 avoids fragmentation and total sublimation, yielding impacts or grazes with cold WDs. This range narrows rapidly with increasing T_WD, especially for snowy bodies. Finally, we discuss briefly how the various forms of deposited debris may finally reach the photosphere surface itself
Complex Dielectric Permittivity Measurements from Ground-Penetrating Radar Data to Estimate Snow Liquid Water Content in the Pendular Regime
Monitoring the snow water equivalent (SWE) is critical to effective management of water resources in many parts of the world that depend on the mountain snowpack for water storage. There are currently no methods to remotely sense SWE with accuracy over large lateral distances in the steep and often forested terrain of mountain basins. Previous studies have shown that measurements of ground-penetrating radar (GPR) velocity can provide accurate estimates of SWE in dry snow. Introduction of liquid water into the snowpack results in a three-phase system that cannot be accurately characterized with GPR velocity alone. We show that measuring the frequency-dependent GPR signal attenuation and velocity provides a direct estimate of the complex dielectric permittivity. Because the imaginary component is a function only of liquid water content, we can utilize both the real and imaginary components of the permittivity to estimate liquid water content, snow density, and SWE using existing empirical relationships that are valid in the pendular regime. We tested this new method at two field sites and found that the estimates were accurate to within 12% of gravimetric methods in both a moist and a dry snowpack. GPR has the potential to provide SWE estimates across large lateral distances over a broad range of snow conditions
Recommended from our members
Design strategies for low embodied energy and greenhouse gases in buildings: analyses of the IEA Annex 57 case studies
This paper introduces the IEA Annex 57 case study method, consisting of a format for describing individual case studies and an evaluation matrix covering all case studies. Sample case studies are used to illustrate the method and the evaluation matrix through a first preliminary analysis. In compiling and evaluation existing, transparent case studies we have taken a stakeholder perspective. By so doing it is intended to identify fordecision makers the key issues affecting EE/EC in buildings. Analysis in this paper focuses on one of the six case study themes, building design strategies for EE/EC mitigation and references cases covering e.g. material selection, building shape, construction stage strategies and strategies to handle the trade-off between embodied and operational impacts in net-zero emission building design
Chemisorption studies of Pt/SnO2 catalysts
The low temperature CO oxidation catalysts that are being developed and tested at NASA-Langley are fairly unique in their ability to efficiently oxidize CO at low temperatures (approx. 303 K). The bulk of the reaction data that has been collected in the laboratory has been determined using plug flow reactors with a low mass of Pt/SnO2/SiO2 catalyst (approx. 0.1 g) and a modest flow rate (5 to 10 sc sm). The researchers have previously characterized the surface solely in terms of N2 BET surface areas. These surface areas have not been that indicative of reaction rate. Indeed, some of the formulations with high BET surface area have yielded lower reaction rates than those with lower BET surface areas. As a result researchers began a program of determining the chemisorption of the various species involved in the reaction; CO, O2 and CO2. Such a determination of will lead to a better understanding of the mechanism and overall kinetics of the reaction. The pulsed-reactor technique, initially described by Freel, is used to determine the amount of a particular molecule that is adsorbed on the catalyst. Since there is some reaction of CO with the surface to produce CO2, the pulsed reactor had to be coupled with a gas chromatograph in order to distinguish between the loss of CO that is due to adsorption by the surface and the loss that is due to reaction with the surface
Atomic and Molecular Opacities for Brown Dwarf and Giant Planet Atmospheres
We present a comprehensive description of the theory and practice of opacity
calculations from the infrared to the ultraviolet needed to generate models of
the atmospheres of brown dwarfs and extrasolar giant planets. Methods for using
existing line lists and spectroscopic databases in disparate formats are
presented and plots of the resulting absorptive opacities versus wavelength for
the most important molecules and atoms at representative temperature/pressure
points are provided. Electronic, ro-vibrational, bound-free, bound-bound,
free-free, and collision-induced transitions and monochromatic opacities are
derived, discussed, and analyzed. The species addressed include the alkali
metals, iron, heavy metal oxides, metal hydrides, , , , ,
, , , and representative grains. [Abridged]Comment: 28 pages of text, plus 22 figures, accepted to the Astrophysical
Journal Supplement Series, replaced with more compact emulateapj versio
- …