269 research outputs found
Asymptotic behaviour of the perturbation of a given mean flow
AbstractWe consider an oceanic domain included in R3, in which there exist, at initial time, a current field V0 and a temperature field θ0. Perturbations V and θ of the velocity and the temperature are induced by a perturbation of the mean wind-stress. V and θ have to satisfy a non-linear problem of Navier-Stokes type. We prove the existence of the solution, for the variational problem, and give some results about uniqueness and regularity. In order to study the asymptotic behaviour of the perturbation, we introduce some operators, deduced from the Stokes operator. Their properties allow us to make a priori estimations, and to prove that, under some assumptions, the perturbations V(t) and θ(t) remain bounded as t → ∞. With stronger assumptions about the initial data, we can prove that the perturbation tends to 0 as t → ∞, and that the solution of the variational problem is a strong solution for every tϵ[0, ∞[
Discovery of a tyrosine-rich sporocyst wall protein in Eimeria tenella.
BACKGROUND: Eimeria is an important genus of apicomplexan parasites. A defining feature of these parasites is the oocyst, which is transmitted into the environment via the faeces of definitive hosts. The oocyst wall contains cross-linked, tyrosine-rich proteins and protects eight infectious sporozoites, housed in pairs within a second walled structure, the sporocyst. The biochemical basis for sporocyst wall formation is not known. FINDINGS: Here, we report the discovery of a novel tyrosine-rich protein, EtSWP1, in Eimeria tenella. Like the tyrosine-rich proteins of the oocyst wall, EtSWP1 is an intrinsically disordered protein with the tyrosine residues concentrated in a specific region of the protein, located immediately following the region of intrinsic disorder. We engineered E. tenella to express mCherry-tagged EtSWP1 and showed that the tagged protein localises specifically to sporocyst walls, indicating that the biochemistry of sporocyst wall assembly is analagous to that of oocyst walls. CONCLUSIONS: Tyrosine-rich proteins are known to be key components of the oocyst wall and we now demonstrate, using gene and protein analyses combined with genetic manipulation, that a novel tyrosine-rich protein is specific for the sporocyst wall. This finding is important because it shows that the biochemistry of these two distinct walls is similar and, hence, brings targeted disruption of sporulation and, therefore, potential neutralisation of oocysts in the environment, a step closer
Challenges in shallow target reconstruction by 3D elastic full-waveform inversion - Which initial model?
Elastic full-waveform inversion (FWI) is a powerful tool for high-resolution subsurface multiparameter characterization. However, 3D FWI applied to land data for near-surface applications is particularly challenging because the seismograms are dominated by highly energetic, dispersive, and complex-scattered surface waves (SWs). In these conditions, a successful deterministic FWI scheme requires an accurate initial model. Our study, primarily focused on field data analysis for 3D applications, aims at enhancing the resolution in the imaging of complex shallow targets, by integrating devoted SW analysis techniques with a 3D spectral-element-based elastic FWI. From dispersion curves, extracted from seismic data recorded over a sharp-interface shallow target, we build different initial S-wave (VS) and P-wave (VP) velocity models (laterally homogeneous and laterally variable), using a specific data transform. Starting from these models, we carry out 3D FWI tests on synthetic and field data, using a relatively straightforward inversion scheme. The field data processing before FWI consists of band-pass filtering and muting of noisy traces. During FWI, a weighting function is applied to the far-offset traces. We test 2D and 3D acquisition layouts, with different positions of the sources and variable offsets. The 3D FWI workflow enriches the overall content of the initial models, allowing a reliable reconstruction of the shallow target, especially when using laterally variable initial models. Moreover, a 3D acquisition layout guarantees a better reconstruction of the target's shape and lateral extension. In addition, the integration of model-oriented (preliminary monoparametric FWI) and data-oriented (time windowing) strategies into the main optimization scheme has produced further improvement of the FWI results
New lumbar Lordosing orthosis for degenerative lumbar conditions: clinical and experimental tests
Delayed Decision-making in Real-time Beatbox Percussion Classification
This is an electronic version of an article published in Journal of New Music Research, 39(3), 203-213, 2010. doi:10.1080/09298215.2010.512979. Journal of New Music Research is available online at: www.tandfonline.com/openurl?genre=article&issn=1744-5027&volume=39&issue=3&spage=20
Analysis of gene mutations associated with isoniazid, rifampicin and ethambutol resistance among Mycobacterium tuberculosis isolates from Ethiopia
<p>Abstract</p> <p>Background</p> <p>The emergence of drug resistance is one of the most important threats to tuberculosis control programs. This study was aimed to analyze the frequency of gene mutations associated with resistance to isoniazid (INH), rifampicin (RMP) and ethambutol (EMB) among <it>Mycobacterium tuberculosis </it>isolates from Northwest Ethiopia, and to assess the performance of the GenoType<sup>® </sup>MTBDRplus and GenoType<sup>® </sup>MTBDRsl assays as compared to the BacT/ALERT 3D system.</p> <p>Methods</p> <p>Two hundred sixty <it>Mycobacterium tuberculosis </it>isolates from smear positive tuberculosis patients diagnosed between March 2009 and July 2009 were included in this study. Drug susceptibility tests were performed in the Institute of Medical Microbiology and Epidemiology of Infectious Diseases, University Hospital of Leipzig, Germany.</p> <p>Results</p> <p>Of 260 isolates, mutations conferring resistance to INH, RMP, or EMB were detected in 35, 15, and 8 isolates, respectively, while multidrug resistance (MDR) was present in 13 of the isolates. Of 35 INH resistant strains, 33 had mutations in the <it>katG </it>gene at Ser315Thr 1 and two strains had mutation in the <it>inhA </it>gene at C15T. Among 15 RMP resistant isolates, 11 had <it>rpoB </it>gene mutation at Ser531Leu, one at His526Asp, and three strains had mutations only at the wild type probes. Of 8 EMB resistant strains, two had mutations in the <it>embB </it>gene at Met306Ile, one at Met306Val, and five strains had mutations only at the wild type probes. The GenoType<sup>® </sup>MTBDRplus assay had a sensitivity of 92% and specificity of 99% for INH resistance, and 100% sensitivity and specificity to detect RMP resistance and MDR. The GenoType<sup>® </sup>MTBDRsl assay had a sensitivity of 42% and specificity of 100% for EMB resistance.</p> <p>Conclusion</p> <p>The dominance of single gene mutations associated with the resistance to INH and RMP was observed in the codon 315 of the <it>katG </it>gene and codon 531 of the <it>rpoB </it>gene, respectively. The GenoType<sup>® </sup>MTBDRplus assay is a sensitive and specific tool for diagnosis of resistance to INH, RMP and MDR. However, the GenoType<sup>® </sup>MTBDRsl assay shows limitations in detecting resistance to EMB.</p
First insights into the phylogenetic diversity of Mycobacterium tuberculosis in Nepal
BACKGROUND: Tuberculosis (TB) is a major public health problem in Nepal. Strain variation in Mycobacterium tuberculosis may influence the outcome of TB infection and disease. To date, the phylogenetic diversity of M. tuberculosis in Nepal is unknown. METHODS AND FINDINGS: We analyzed 261 M. tuberculosis isolates recovered from pulmonary TB patients recruited between August 2009 and August 2010 in Nepal. M. tuberculosis lineages were determined by single nucleotide polymorphisms (SNP) typing and spoligotyping. Drug resistance was determined by sequencing the hot spot regions of the relevant target genes. Overall, 164 (62.8%) TB patients were new, and 97 (37.2%) were previously treated. Any drug resistance was detected in 50 (19.2%) isolates, and 16 (6.1%) were multidrug-resistant. The most frequent M. tuberculosis lineage was Lineage 3 (CAS/Delhi) with 106 isolates (40.6%), followed by Lineage 2 (East-Asian lineage, includes Beijing genotype) with 84 isolates (32.2%), Lineage 4 (Euro-American lineage) with 41 (15.7%) isolates, and Lineage 1 (Indo-Oceanic lineage) with 30 isolates (11.5%). Based on spoligotyping, we found 45 different spoligotyping patterns that were previously described. The Beijing (83 isolates, 31.8%) and CAS spoligotype (52, 19.9%) were the dominant spoligotypes. A total of 36 (13.8%) isolates could not be assigned to any known spoligotyping pattern. Lineage 2 was associated with female sex (adjusted odds ratio [aOR] 2.58, 95% confidence interval [95% CI] 1.42-4.67, p = 0.002), and any drug resistance (aOR 2.79; 95% CI 1.43-5.45; p = 0.002). We found no evidence for an association of Lineage 2 with age or BCG vaccination status. CONCLUSIONS: We found a large genetic diversity of M. tuberculosis in Nepal with representation of all four major lineages. Lineages 3 and 2 were dominating. Lineage 2 was associated with clinical characteristics. This study fills an important gap on the map of the M. tuberculosis genetic diversity in the Asian reg
Cryptosporidium parvum rhomboid1 has an activity in microneme protein CpGP900 cleavage
The SURFEXv7.2 land and ocean surface platform for coupled or offline simulation of Earth surface variables and fluxes
CC Attribution 3.0 License.Final revised paper also available at http://www.geosci-model-dev.net/6/929/2013/gmd-6-929-2013.pdfInternational audienceSURFEX is a new externalized land and ocean surface platform that describes the surface fluxes and the evolution of four types of surface: nature, town, inland water and ocean. It can be run either coupled or in offline mode. It is mostly based on pre-existing, well validated scientific models. It can be used in offline mode (from point scale to global runs) or fully coupled with an atmospheric model. SURFEX is able to simulate fluxes of carbon dioxide, chemical species, continental aerosols, sea salt and snow particles. It also includes a data assimilation module. The main principles of the organization of the surface are described first. Then, a survey is made of the scientific module (including the coupling strategy). Finally the main applications of the code are summarized. The current applications are extremely diverse, ranging from surface monitoring and hydrology to numerical weather prediction and global climate simulations. The validation work undertaken shows that replacing the pre-existing surface models by SURFEX in these applications is usually associated with improved skill, as the numerous scientific developments contained in this community code are used to good advantage
- …