15,152 research outputs found
Alternate methods of applying diffusants to silicon solar cells
Low-melting phosphate and borate glasses were screen printed on silicon wafers and heated to form n and p junctions. Data on surface appearance, sheet resistance and junction depth are presented. Similar data are reported for vapor phase transport from sintered aluminum metaphosphate and boron-containing glass-ceramic solid sources. Simultaneous diffusion of an N(+) layer with screen-printed glass and a p(+) layer with screen-printed Al alloy paste was attempted. No p(+) back surface field formation was achieved. Some good cells were produced but the heating in an endless-belt furnace caused a large scatter in sheet resistance and junction depth for three separate lots of wafers
Study of an engine flow diverter system for a large scale ejector powered aircraft model
Requirements were established for a conceptual design study to analyze and design an engine flow diverter system and to include accommodations for an ejector system in an existing 3/4 scale fighter model equipped with YJ-79 engines. Model constraints were identified and cost-effective limited modification was proposed to accept the ejectors, ducting and flow diverter valves. Complete system performance was calculated and a versatile computer program capable of analyzing any ejector system was developed
Public Sector Collective Bargaining and the Imperative for Service Delivery: An Overview
[Excerpt] When public sector officials and union leaders are willing to enter into cooperative arrangements, the evidence in this volume and elsewhere suggests they usually find that cooperation results in improvements in both the delivery of public services and the quality of work life. Certainly there have been instances when cooperation has failed to produce desirable results, but this volume includes ample testimony to its potential beneficial effects and depicts successful experiences with cooperation at the federal government level, in a number of state governments, in Indianapolis, and elsewhere. Also, we know that in places such as Los Angeles; Phoenix; Portland, Maine; Toledo, Ohio; Cincinnati, Ohio; and numerous other locales the cooperative approach has achieved positive results (U.S. DOL 1996). Yet cooperation in the public sector remains the exception rather than the rule
Competency For Graviresponse In The LeafāSheath Pulvinus Of Avena Sativa: Onset To Loss
Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/141484/1/ajb211244.pd
Minimizing information overload in a communications system utilizing temporal scaling and serialization
Presented at the 12th International Conference on Auditory Display (ICAD), London, UK, June 20-23, 2006.Recent Navy research has identified the monitoring of multiple communications streams as a performance bottleneck. We introduce a novel approach for improved monitoring of multichannel voice communications which makes use of timecompression of speech in order to present communications serially, and discuss some of its potential benefits and pitfalls. An experiment currently being developed and piloted is detailed as part of a larger series of studies designed to examine the plausibility of this new approach. This study will explore the effects of sped up speech on listeners' comprehension of vocal radio transmissions
Structural Development of the Oat Plant
The anatomical structure and morphology of the oat plant (Avena sativa L.) have been reviewed previously by Hector (1936), Bonnett (1961a,b) and Coffman (1977). In addition, Bonnett published detailed accounts of oat panicle development (1937, 1961a,b). This work has been summarized by Esau in her book, Anatomy of Seed Plants, in 1977. It is not the purpose of the present authors to simply go over all this same material again in a repetitive fashion, but rather, to emphasize some of the more recent and previously overlooked work on structural development of the oat plant, with emphasis on the major cultivated species, A. sativa (see Stanton, 1955; Coffman, 1977 for descriptions of this species). The material presented here should be of use to oat breeders, agronomists, and plant physiologists
Including debris cover effects in a distributed model of glacier ablation
Distributed glacier melt models generally assume that the glacier surface consists of bare exposed ice and snow. In reality, many glaciers are wholly or partially covered in layers of debris that tend to suppress ablation rates. In this paper, an existing physically based point model for the ablation of debris-covered ice is incorporated in a distributed melt model and applied to Haut Glacier dāArolla, Switzerland, which has three large patches of debris cover on its surface. The model is based on a 10 m resolution digital elevation model (DEM) of the area; each glacier pixel in the DEM is defined as either bare or debris-covered ice, and may be covered in snow that must be melted off before ice ablation is assumed to occur. Each debris-covered pixel is assigned a debris thickness value using probability distributions based on over 1000 manual thickness measurements. Locally observed meteorological data are used to run energy balance calculations in every pixel, using an approach suitable for snow, bare ice or debris-covered ice as appropriate. The use of the debris model significantly reduces the total ablation in the debris-covered areas, however the precise reduction is sensitive to the temperature extrapolation used in the model distribution because air near the debris surface tends to be slightly warmer than over bare ice. Overall results suggest that the debris patches, which cover 10% of the glacierized area, reduce total runoff from the glacierized part of the basin by up to 7%
X-ray scattering from surfaces: discrete and continuous components of roughness
Incoherent surface scattering yields a statistical description of the
surface, due to the ensemble averaging over many independently sampled volumes.
Depending on the state of the surface and direction of the scattering vector
relative to the surface normal, the height distribution is discrete,
continuous, or a combination of the two. We present a treatment for the
influence of multimodal surface height distributions on Crystal Truncation Rod
scattering. The effects of a multimodal height distribution are especially
evident during in situ monitoring of layer-by-layer thin-film growth via Pulsed
Laser Deposition. We model the total height distribution as a convolution of
discrete and continuous components, resulting in a broadly applicable
parameterization of surface roughness which can be applied to other scattering
probes, such as electrons and neutrons. Convolution of such distributions could
potentially be applied to interface or chemical scattering. Here we find that
this analysis describes accurately our experimental studies of SrTiO3
annealing and homoepitaxial growth.Comment: 15 pages, 7 figure
Occultation analysis of BATSE data: Operational aspects
The Burst and Transient Source Experiment (BATSE) large area detectors are being used to monitor hard x-ray/gamma ray sources on a daily basis for evidence of transient behavior. Flux measurements are performed using a simple earth occultation technique. Daily searches are also being performed to detect occultation steps of sources which are not being routinely monitored. Topics concerning the operational aspects of the occultation measurements are presented. Preliminary spectral results are also presented for several of the brighter sources
- ā¦