405 research outputs found
Interactions Between a Condensed Target and a Non-Equilibrium Plasma: Acid-Base Reactions at the Interface
A new approach of plasma processes of industrial use is presented, with emphasis on the chemical properties of the plasma gas. Reactions occurring at the gas/target interface are for the first time interpreted in terms of acid-base reactions and pertinent examples are given of laboratory experiments and of industrial treatments (e. g., etching, plasma polymerization or surface modification processes). Proton exchanges between the plasma phase and an aqueous target gives evidence of Bronsted acid-base phenomena. Illustrations of Lewis acid-base characters are provided by the role of biradicals (e.g., halogenocarbenes, nitrenc) which are the main reacting species in etching or in surface treatment processes
Regolith behavior under asteroid-level gravity conditions: Low-velocity impacts into mm- and cm-sized grain targets
In situ observations of small asteroids show that surfaces covered by
boulders and coarse terrain are frequent on such bodies. Regolith grain sizes
have distributions on approximately mm and cm scales, and the behavior of such
large grains in the very low-gravity environments of small body surfaces
dictates their morphology and evolution. In order to support the understanding
of natural processes (e.g., the recapturing of impact ejecta) or
spacecraft-induced interactions (e.g., the fate of a small lander), we aim to
experimentally investigate the response of coarse-grained target surfaces to
very-low-speed impacts (below 2 m/s). We present the outcome of 86 low-speed
impacts of a cm-sized spherical projectile into a bed of simulated regolith,
composed of irregular mm- and cm-sized grains. These impacts were performed
under vacuum and microgravity conditions. Our results include measurements for
the projectile coefficient of restitution and penetration depth, as well as
ejecta production, speed, and mass estimation. We find that impact outcomes
include the frequent occurrence of projectile bouncing and tangential rolling
on the target surface upon impact. Ejecta is produced for impact speeds higher
than about 12 cm/s, and ejecta speeds scale with the projectile to target the
grain size ratio and the impact speed. Ejected mass estimations indicate that
ejecta is increasingly difficult to produce for increasing grain sizes.
Coefficients of restitution of rebounding projectiles do not display a
dependency on the target grain size, unlike their maximum penetration depth,
which can be scaled with the projectile to target grain size ratio. Finally, we
compare our experimental measurements to spacecraft data and numerical work on
Hayabusa 2's MASCOT landing on the surface of the asteroid Ryugu
Identification of serine/threonine kinase and nucleotide-binding site–leucine-rich repeat (NBS-LRR) genes in the fire blight resistance quantitative trait locus of apple cultivar ‘Evereste’
Fire blight is the most destructive bacterial disease affecting apple (Malus×domestica) worldwide. So far, no resistance gene against fire blight has been characterized in apple, despite several resistance regions having been identified. A highly efficacious resistance quantitative trait locus (QTL) was localized on linkage group 12 (LG12) of the ornamental cultivar ‘Evereste’. A marker previously reported to be closely linked to this resistance was used to perform a chromosome landing. A bacterial artificial chromosome (BAC) clone of 189 kb carrying the fire blight resistance QTL was isolated and sequenced. New microsatellite markers were developed, and the genomic region containing the resistance locus was limited to 78 kb. A cluster of eight genes with homologies to already known resistance gene structures to bacterial diseases was identified and the corresponding gene transcription was verified. From this cluster, two genes were recognized in silico as the two most probable fire blight resistance genes showing homology with the Pto/Prf complex in tomato
On the groove pressing of Ni-W alloy: microstructure, texture and mechanical properties evolution
International audienceThe microstructure, texture and mechanical properties of the Ni-14%W(wt.%) alloy with two different initial grain sizes and textures were investigated after groove pressing (GP) at 450 °C to 4 cycles using Electron Back Scatter Diffraction (EBSD) and microhardness measurements. The initial first series was characterized by small equiaxed grains and Cube dominant texture component. The second series has elongated grains and β-fiber texture. EBSD analysis has shown that GP processing led to a slight refinement (less than 15%) of equiaxed grains in series I while greater refinement (~55%) of the mean spacing along normal direction was observed in series II. The texture did not drastically change from the initial ones and was characterized by the weakening of the Cube component in series I and rapid decrease of Copper component for series II. GP processing reduces very slightly the plastic anisotropy of the alloy with initial elongated granular microstructure
Laser desorption ionization mass spectrometry as an analytical tool for the investigation of Malus X Domestica treated by selected plant resistant inducers
Apple is a very important agricultural plant, and globally cultivated fruit tree. For its protection against pathogens, pesticides are commonly used, which poses a heavy burden on the environment. Therefore alternative methods of crop protection are being widely explored, some of them focusing on the stimulation of the plant’s immune defense (e.g. development of resistant genotypes, use of plant resistant inducers). In this respect, the induced formation of protective plant metabolites (phytoalexins) represents the most interesting strategy. Phytoalexins are monitored mostly by liquid chromatography coupled with mass spectrometry (LC-MS). For phenolic phytoalexins, matrix free laser desorption ionization (LDI) may provide a promising supplement or alternative, particularly as many phenols exhibit close structural similarities to commercial matrices used in matrix assisted laser desorption ionization (MALDI). Contrary to LC-MS, LDI-MS can be performed without time consuming sample preparation or chromatographic method optimization and is not limited to specific solvents
Surfactin Protects Wheat against Zymoseptoria tritici and Activates Both Salicylic Acid- and Jasmonic Acid-Dependent Defense Responses
Natural elicitors induce plant resistance against a broad spectrum of diseases, and are currently among the most promising biocontrol tools. The present study focuses on the elicitor properties of the cyclic lipopeptide surfactin on wheat, in order to stimulate the defenses of this major crop against the challenging fungal pathogen Zymoseptoria tritici. The protection efficacy of surfactin extracted from the strain Bacillus amyloliquefaciens S499 was investigated through greenhouse trials. Surfactin protected wheat by 70% against Z. tritici, similarly to the chemical reference elicitor Bion®50WG. In vitro biocidal assays revealed no antifungal activities of surfactin towards the pathogen. A biomolecular RT-qPCR based low-density microarray tool was used to study the relative expression of 23 wheat defense genes. Surfactin significantly induced wheat natural defenses by stimulating both salicylic acid- and jasmonic acid-dependent signaling pathways. Surfactin was successfully tested as an elicitor on the pathosystem wheat–Z. tritici. These results promote further sustainable agricultural practices and the reduction of chemical inputs
Synthesis, electrochemical and photochromic behaviour of a series of (1,4-dithiafulven-6-yl)substituted 3H-naphtho[2,1-b]pyran derivatives
The synthesis and electrochemical and photochromic properties of new 3,3-diphenyl-8-(1,4-dithiafulven-6-yl)-[3H]-naphtho[2,1-b]pyran derivatives containing differently substituted dithiafulvenyl units are described. An example of electrochemical dimerization is shown which gives access to electroactive bichromophoric systems. Such systems could allow the study of the interplay of photochromic and electrochemical properties
Evaluating the textural and mechanical properties of an Mg-Dy alloy processed by high-pressure torsion
Samples of an Mg-0.41Dy (wt. %) alloy were severely deformed by high-pressure torsion (HPT) at room temperature up to 15 turns and the texture, microstructure and microhardness values in the centres, mid-radial points and edges of the HPT-deformed discs were investigated using X-ray diffraction, Electron BackScatter Diffraction and Vickers microhardness measurements. The textures in the centres of discs were characterized by a typical weak basal fiber whereas at both the mid-points and edges of the discs there was a strong basal texture where the c-axis of most grains was shifted 15° away from the shear direction. An almost homogeneous ultrafine-grained structure with a grain size of about 0.75 μm was achieved after 15 HPT turns. The microhardness values in these three positions increased with increasing numbers of turns, reached a maximum and then decreased to a lower steady-state level at large strains. In addition to dislocation and grain size hardening, the results show that texture strengthening contributes significantly to the rapid increase in hardening in the early stages of deformation
- …