1,752 research outputs found
A possible radiation-resistant solar cell geometry using superlattices
A solar cell structure is proposed which uses a GaAs nipi doping superlattice. An important feature of this structure is that photogenerated minority carriers are very quickly collected in a time shorter than bulk lifetime in the fairly heavily doped n and p layers and these carriers are then transported parallel to the superlattice layers to selective ohmic contacts. Assuming that these already-separated carriers have very long recombination lifetimes, due to their across an indirect bandgap in real space, it is argued that the proposed structure may exhibit superior radiation tolerance along with reasonably high beginning-of-life efficiency
Radiation damage and annealing in large area n+/p/p+ GaAs shallow homojunction solar cells
Annealing of radiation damage was observed for the first time in VPE-grown, 2- by 2-cm, n+/p/p+ GaAs shallow homojunction solar cells. Electrical performance of several cells was determined as a function of 1-MeV electron fluence in the range of 10 to the 13th power to 10 to the 15th power e-/sq cm and as a function of thermal annealing time at various temperatures. Degradation of normalized power output after a fluence of 10 to the 15th power 1-MeV electrons/sq cm ranged from a low of 24 to 31 percent of initial maximum power. Normalized short circuit current degradation was limited to the range from 10 to 19 percent of preirradiated values. Thermal annealing was carried out in a flowing nitrogen gas ambient, with annealing temperatures spanning the range from 125 to 200 C. Substantial recovery of short circuit current was observed at temperatures as low as 175 C. In one case improvement by as much as 10 percent of the postirradiated value was observed. The key features of these cells are their extremely thin emitter layers (approxmately 0.05 micrometers), the absence of any Al sub xGd sub 1-x As passivating window layer, and their fabrication by vapor phase epitaxy
Influence of surfactants on the structure of titanium oxide gels : experiments and simulations
We report here on experimental and numerical studies of the influence of
surfactants on mineral gel synthesis. The modification of the gel structure
when the ratios water-precursor and water-surfactant vary is brought to the
fore by fractal dimension measures. A property of {\em polydispersity of the
initial hydrolysis} is proposed to explain these results, and is successfuly
tested through numerical experiments of three dimensional chemically limited
aggregation.Comment: 12 pages, 4 Postscript figures, uses RevTe
Aerosol-Assisted Synthesis of Monodisperse Single-Crystalline α-Cristobalite Nanospheres
Monodisperse single-crystalline α-cristobalite nanospheres have been synthesized by hydrocarbon-pyrolysis-induced carbon deposition on amorphous silica aerosol nanoparticles, devitrification of the coated silica at high temperature, and subsequent carbon removal by oxidation. The nanosphere size can be well controlled by tuning the size of the colloidal silica precursor. Uniform, high-purity nanocrystalline α-cristobalite is important for catalysis, nanocomposites, advanced polishing, and understanding silica nanotoxicology
Fluctuating Bond Aggregation: a Model for Chemical Gel Formation
The Diffusion-Limited Cluster-Cluster Aggregation (DLCA) model is modified by
including cluster deformations using the {\it bond fluctuation} algorithm. From
3 computer simulations, it is shown that, below a given threshold value
of the volumic fraction , the realization of all intra-aggregate
bonding possibilities prevents the formation of a gelling network. For ,
the sol-gel transition occurs at a time which, in contrast to DLCA,
doesnot diverge with the box size. Several results are reported including small
angle scattering curves and possible applications are discussed.Comment: RevTex, 9 pages + 3 postscript figures appended using "uufiles". To
appear in Phys. Rev. Let
Three-dimensional coherent X-ray diffraction imaging of a ceramic nanofoam: determination of structural deformation mechanisms
Ultra-low density polymers, metals, and ceramic nanofoams are valued for
their high strength-to-weight ratio, high surface area and insulating
properties ascribed to their structural geometry. We obtain the labrynthine
internal structure of a tantalum oxide nanofoam by X-ray diffractive imaging.
Finite element analysis from the structure reveals mechanical properties
consistent with bulk samples and with a diffusion limited cluster aggregation
model, while excess mass on the nodes discounts the dangling fragments
hypothesis of percolation theory.Comment: 8 pages, 5 figures, 30 reference
Interface energies of (100)_{YSZ} and (111)_{YSZ} epitaxial islands on (0001)_{alpha-Al_2O_3} substrates from first principles
We present an ab initio study of the interface energies of cubic
yttria-stabilized zirconia (YSZ) epitaxial layers on a (0001)_{alpha-Al_2O_3}
substrate. The interfaces are modelled using a supercell geometry and the
calculations are carried out in the framework of density-functional theory
(DFT) and the local-density approximation (LDA) using the
projector-augmented-wave (PAW) pseudopotential approach. Our calculations
clearly demonstrate that the (111)_{YSZ} || (0001)_{alpha-Al_2O_3} interface
energy is lower than that of (100)_{YSZ} || (0001)_{alpha-Al_2O_3}. This result
is central to understanding the behaviour of YSZ thin solid film islanding on
(0001)_{alpha-Al_2O_3} substrates, either flat or in presence of defects.Comment: 25 pages, 5 figures, 10 tables, submitted to Physical Review
Band Formation during Gaseous Diffusion in Aerogels
We study experimentally how gaseous HCl and NH_3 diffuse from opposite sides
of and react in silica aerogel rods with porosity of 92 % and average pore size
of about 50 nm. The reaction leads to solid NH_4Cl, which is deposited in thin
sheet-like structures. We present a numerical study of the phenomenon. Due to
the difference in boundary conditions between this system and those usually
studied, we find the sheet-like structures in the aerogel to differ
significantly from older studies. The influence of random nucleation centers
and inhomogeneities in the aerogel is studied numerically.Comment: 7 pages RevTex and 8 figures. Figs. 4-8 in Postscript, Figs. 1-3 on
request from author
Recommended from our members
Use of coupled passivants and consolidants on calcite mineral surfaces
Deterioration of monuments, buildings, and works of art constructed of carbonate-based stone potentially can be arrested by applying a combination of chemical passivants and consolidants that prevent hydrolytic attack and mechanical weakening. The authors used molecular modeling and laboratory synthesis to develop an improved passivating agent for the calcite mineral surface based on binding strength and molecular packing density. The effectiveness of the passivating agent with and without a linked outer layer of consolidant against chemical weathering was determined through leaching tests conducted with a pH-stat apparatus at pH 5 and 25 C. For the range of molecules considered, modeling results indicate that the strongest-binding passivant is the trimethoxy dianionic form of silylalkylaminocarboxylate (SAAC). The same form of silylalkylphosphonate (SAP) is the second strongest binder and the trisilanol neutral form of aminoethylaminopropylsilane (AEAPS) is ranked third. Short-term leaching tests on calcite powders coated with the trisilanol derivative of SAAC, the triethoxy neutral form of SAP, and the trimethoxy neutral form of AEAPS show that the passivant alone does not significantly slow the dissolution rate. However, all passivants when linked to the sol consolidant result in decreased rates. Combined AEAPS plus consolidant results in a coating that performs better than the commercial product Conservare{reg_sign} OH and at least as well as Conservare{reg_sign} H. The modeling results indicate that there may be a threshold binding energy for the passivant above which the dissolution rate of calcite is actually enhanced. More strongly-binding passivants may aid in the dissolution mechanism or dissociate in aqueous solution exposing the calcite surface to water
The targeted delivery of multicomponent cargos to cancer cells by nanoporous particle-supported lipid bilayers.
Encapsulation of drugs within nanocarriers that selectively target malignant cells promises to mitigate side effects of conventional chemotherapy and to enable delivery of the unique drug combinations needed for personalized medicine. To realize this potential, however, targeted nanocarriers must simultaneously overcome multiple challenges, including specificity, stability and a high capacity for disparate cargos. Here we report porous nanoparticle-supported lipid bilayers (protocells) that synergistically combine properties of liposomes and nanoporous particles. Protocells modified with a targeting peptide that binds to human hepatocellular carcinoma exhibit a 10,000-fold greater affinity for human hepatocellular carcinoma than for hepatocytes, endothelial cells or immune cells. Furthermore, protocells can be loaded with combinations of therapeutic (drugs, small interfering RNA and toxins) and diagnostic (quantum dots) agents and modified to promote endosomal escape and nuclear accumulation of selected cargos. The enormous capacity of the high-surface-area nanoporous core combined with the enhanced targeting efficacy enabled by the fluid supported lipid bilayer enable a single protocell loaded with a drug cocktail to kill a drug-resistant human hepatocellular carcinoma cell, representing a 10(6)-fold improvement over comparable liposomes
- …