1,261 research outputs found
Lattice Boltzmann simulations of contact line motion in a liquid-gas system
We use a lattice Boltzmann algorithm for liquid-gas coexistence to
investigate the steady state interface profile of a droplet held between two
shearing walls. The algorithm solves the hydrodynamic equations of motion for
the system. Partial wetting at the walls is implemented to agree with Cahn
theory. This allows us to investigate the processes which lead to the motion of
the three-phase contact line. We confirm that the profiles are a function of
the capillary number and a finite size analysis shows the emergence of a
dynamic contact angle, which can be defined in a region where the interfacial
curvature tends to zero.Comment: 13 pages, 5 figures, to appear in Phil. Trans. Roy. Soc. A
(Proceedings of the Xth International Conference on Discrete Simulation of
Fluid Dynamics.
Scheme for teleportation of quantum states onto a mechanical resonator
We propose an experimentally feasible scheme to teleport an unkown quantum
state onto the vibrational degree of freedom of a macroscopic mirror. The
quantum channel between the two parties is established by exploiting radiation
pressure effects.Comment: 5 pages, 2 figures, in press on PR
Ranking hospitals based on preventable hospital death rates:a systematic review with implications for both direct measurement and indirect measurement through standardized mortality rates
Objectives
There is interest in monitoring avoidable or preventable deaths measured directly or indirectly through standardized mortality rates (SMRs). We reviewed studies that use implicit case note reviews to estimate the range of preventable death rates observed, the measurement characteristics of those estimates, and the measurement procedures used to generate them. We comment on the implications for monitoring SMRs and illustrate a way to calculate the number of reviews needed to establish a reliable estimate of preventability of one death or the hospital preventable death rate.
Design
Systematic review of the literature supplemented by re-analysis of authors previously published and un-published data and measurement design calculations.
Data source
Searches in PubMed, MEDLINE (OvidSP) and Web of Knowledge in June 2012, updated December 2017.
Eligibility criteria
Studies of hospital-wide admissions from general and acute medical wards where preventable deaths rates are provided or can be estimate and which can provide inter- observer variations.
Results
Twenty-four studies were included from 1983-2017. Recent larger studies suggest consistently low rates of preventable deaths (3.0-6.5% since 2012). Reliability of a single review for distinguishing between individual cases with regard to the preventability of death had a Kappa rate of 0.27-0.50 for deaths and 0.24-0.76 for adverse events. A Kappa of 0.35 would require an average of 8-17 reviews of a single case to be precise enough to have confidence about high stakes decisions to change care procedures or impose sanctions within a hospital as a result. No study estimated the variation in preventable deaths across hospitals, although we were able to re-analyse one study to obtain an estimate. Based on this estimate, 200-300 total case-note reviews per hospital could be required to reliably distinguish between hospitals.
The studies display considerable heterogeneity: 13/24 studies defined preventable with a threshold of â„4 in a six-category Likert scale; 11/24 involved a two-stage screening process with nurses at the first stage and physicians at the second. Fifteen studies provided expert clinical review support for reviewer disagreements, advice, or quality control. A âgeneralist/internistâ was the modal physician specialty for reviewers and they received 1-3 days of generic tools orientation and case-note review practice. Methods did not consider the influence of human or environmental factors.
Conclusions
The literature provides limited information about the measurement characteristics of preventable deaths that suggests substantial numbers of reviews may be needed to create reliable estimates of preventable deaths at the individual or hospital level. Any operational program would require population specific estimates of reliability. Preventable death rates are low, which is likely to make it difficult to use SMRs based on all deaths to validly profile hospitals. The literature provides little information to guide improvements in the measurement procedures.
Systematic review registration
The systematic review was conceived prior to PROSPERO, and so has not been registered
2D photonic-crystal optomechanical nanoresonator
We present the optical optimization of an optomechanical device based on a
suspended InP membrane patterned with a 2D near-wavelength grating (NWG) based
on a 2D photonic-crystal geometry. We first identify by numerical simulation a
set of geometrical parameters providing a reflectivity higher than 99.8 % over
a 50-nm span. We then study the limitations induced by the finite value of the
optical waist and lateral size of the NWG pattern using different numerical
approaches. The NWG grating, pierced in a suspended InP 265 nm-thick membrane,
is used to form a compact microcavity involving the suspended nano-membrane as
end mirror. The resulting cavity has a waist size smaller than 10 m and a
finesse in the 200 range. It is used to probe the Brownian motion of the
mechanical modes of the nanomembrane
Quantifying the Energetics and Length Scales of Carbon Segregation to Fe Symmetric Tilt Grain Boundaries Using Atomistic Simulations
Segregation of impurities to grain boundaries plays an important role in both
the stability and macroscopic behavior of polycrystalline materials. The
research objective in this work is to better characterize the energetics and
length scales involved with the process of solute and impurity segregation to
grain boundaries. Molecular dynamics simulations are used to calculate the
segregation energies for carbon within multiple grain boundary sites over a
database of 125 symmetric tilt grain boundaries in Fe. The simulation results
show that the majority of atomic sites near the grain boundary have segregation
energies lower than in the bulk. Moreover, depending on the boundary, the
segregation energies approach the bulk value approximately 5-12 \AA\ away from
the center of the grain boundary, providing an energetic length scale for
carbon segregation. A subsequent data reduction and statistical representation
of this dataset provides critical information such as about the mean
segregation energy and the associated energy distributions for carbon atoms as
a function of distance from the grain boundary, which quantitatively informs
higher scale models with energetics and length scales necessary for capturing
the segregation behavior of impurities in Fe. The significance of this research
is the development of a methodology capable of ascertaining segregation
energies over a wide range of grain boundary character (typical of that
observed in polycrystalline materials), which herein has been applied to carbon
segregation in a specific class of grain boundaries in iron
High-finesse Fabry-Perot cavities with bidimensional SiN photonic-crystal slabs
Light scattering by a two-dimensional photonic crystal slab (PCS) can result in dramatic interference effects associated with Fano resonances. Such devices offer appealing alternatives to distributed Bragg reflectors or filters for various applications such as optical wavelength and polarization filters, reflectors, semiconductor lasers, photodetectors, bio-sensors, or non-linear optical components. Suspended PCSs also find natural applications in the field of optomechanics, where the mechanical modes of a suspended slab interact via radiation pressure with the optical field of a high finesse cavity. The reflectivity and transmission properties of a defect-free suspended PCS around normal incidence can be used to couple out-of-plane mechanical modes to an optical field by integrating it in a free space cavity. Here, we demonstrate the successful implementation of a PCS reflector on a high-tensile stress SiN nanomembrane. We illustrate the physical process underlying the high reflectivity by measuring the photonic crystal band diagram. Moreover, we introduce a clear theoretical description of the membrane scattering properties in the presence of optical losses. By embedding the PCS inside a high-finesse cavity, we fully characterize its optical properties. The spectrally, angular, and polarization resolved measurements demonstrate the wide tunability of the membrane's reflectivity, from nearly 0 to 99.9470~ 0.0025 \%, and show that material absorption is not the main source of optical loss. Moreover, the cavity storage time demonstrated in this work exceeds the mechanical period of low-order mechanical drum modes. This so-called resolved sideband condition is a prerequisite to achieve quantum control of the mechanical resonator with light
Radiation-pressure cooling and optomechanical instability of a micro-mirror
Recent experimental progress in table-top experiments or gravitational-wave
interferometers has enlightened the unique displacement sensitivity offered by
optical interferometry. As the mirrors move in response to radiation pressure,
higher power operation, though crucial for further sensitivity enhancement,
will however increase quantum effects of radiation pressure, or even jeopardize
the stable operation of the detuned cavities proposed for next-generation
interferometers. The appearance of such optomechanical instabilities is the
result of the nonlinear interplay between the motion of the mirrors and the
optical field dynamics. In a detuned cavity indeed, the displacements of the
mirror are coupled to intensity fluctuations, which modifies the effective
dynamics of the mirror. Such "optical spring" effects have already been
demonstrated on the mechanical damping of an electromagnetic waveguide with a
moving wall, on the resonance frequency of a specially designed flexure
oscillator, and through the optomechanical instability of a silica
micro-toroidal resonator. We present here an experiment where a
micro-mechanical resonator is used as a mirror in a very high-finesse optical
cavity and its displacements monitored with an unprecedented sensitivity. By
detuning the cavity, we have observed a drastic cooling of the micro-resonator
by intracavity radiation pressure, down to an effective temperature of 10 K. We
have also obtained an efficient heating for an opposite detuning, up to the
observation of a radiation-pressure induced instability of the resonator.
Further experimental progress and cryogenic operation may lead to the
experimental observation of the quantum ground state of a mechanical resonator,
either by passive or active cooling techniques
Observation of the Three-Mode Parametric Instability
Three-mode parametric interactions occur in triply-resonant optomechanical
systems: photons from an optical pump mode are coherently scattered to a
high-order mode by mechanical motion of the cavity mirrors, and these modes
resonantly interact via radiation pressure force when certain conditions are
met. Such effects are predicted to occur in long baseline advanced
gravitational-wave detectors. They can pump energy into acoustic modes, leading
to parametric instability, but they can also extract acoustic energy, leading
to optomechanical cooling. We develop a large amplitude model of three-mode
interactions that explains the ring-up amplitude saturation after instability
occurs. We also demonstrate both radiation-pressure cooling and mechanical
amplification in two different three-mode optomechanical systems, including the
first observation of the three-mode parametric instability in a free-space
Fabry-Perot cavity. The experimental data agrees well with the theoretical
model. Contrary to expectations, parametric instability does not lead to loss
of cavity lock, a fact which may make it easier to implement control techniques
to overcome instability.Comment: 11 pages, 14 figure
Multiscale correlative tomography: an investigation of creep cavitation in 316 stainless steel
Creep cavitation in an ex-service nuclear steam header Type 316 stainless steel sample is investigated through a multiscale tomography workflow spanning eight orders of magnitude, combining X-ray computed tomography (CT), plasma focused ion beam (FIB) scanning electron microscope (SEM) imaging and scanning transmission electron microscope (STEM) tomography. Guided by microscale X-ray CT, nanoscale X-ray CT is used to investigate the size and morphology of cavities at a triple point of grain boundaries. In order to understand the factors affecting the extent of cavitation, the orientation and crystallographic misorientation of each boundary is characterised using electron backscatter diffraction (EBSD). Additionally, in order to better understand boundary phase growth, the chemistry of a single boundary and its associated secondary phase precipitates is probed through STEM energy dispersive X-ray (EDX) tomography. The difference in cavitation of the three grain boundaries investigated suggests that the orientation of grain boundaries with respect to the direction of principal stress is important in the promotion of cavity formation
Dynamics of gravity driven three-dimensional thin films on hydrophilic-hydrophobic patterned substrates
We investigate numerically the dynamics of unstable gravity driven
three-dimensional thin liquid films on hydrophilic-hydrophobic patterned
substrates of longitudinal stripes and checkerboard arrangements. The thin film
can be guided preferentially on hydrophilic longitudinal stripes, while fingers
develop on adjacent hydrophobic stripes if their width is large enough. On
checkerboard patterns, the film fingering occurs on hydrophobic domains, while
lateral spreading is favoured on hydrophilic domains, providing a mechanism to
tune the growth rate of the film. By means of kinematical arguments, we
quantitatively predict the growth rate of the contact line on checkerboard
arrangements, providing a first step towards potential techniques that control
thin film growth in experimental setups.Comment: 30 pages, 12 figure
- âŠ