Single-stage experimental evaluation of tandem-airfoil rotor and stator blading for compressors, part 8

An experimental investigation was conducted with an 0.8 hub/tip ratio, single-stage, axial flow compressor to determine the potential of tandem-airfoil blading for improving the efficiency and stable operating range of compressor stages. The investigation included testing of a baseline stage with single-airfoil blading and two tandem-blade stages. The overall performance of the baseline stage and the tandem-blade stage with a 20-80% loading split was considerably below the design prediction. The other tandem-blade stage, which had a rotor with a 50-50% loading split, came within 4.5% of the design pressure rise (delta P(bar)/P(bar) sub 1) and matched the design stage efficiency. The baseline stage with single-airfoil blading, which was designed to account for the actual rotor inlet velocity profile and the effects of axial velocity ratio and secondary flow, achieved the design predicted performance. The corresponding tandem-blade stage (50-50% loading split in both blade rows) slightly exceeded the design pressure rise but was 1.5 percentage points low in efficiency. The tandem rotors tested during both phases demonstrated higher pressure rise and efficiency than the corresponding single-airfoil rotor, with identical inlet and exit airfoil angles

Non-Universal Gaugino Masses, CDMS, and the LHC

We consider the possibility that the recently reported events at the CDMS-II direct dark matter detection experiment are the result of coherent scattering of supersymmetric neutralinos. In such a scenario we argue that non-universal soft supersymmetry breaking gaugino masses are favored with a resulting lightest neutralino with significant Higgsino and wino components. We discuss the accompanying signals which must be seen at liquid-xenon direct detection experiments and indirect detection experiments if such a supersymmetric interpretation is to be maintained. We illustrate the possible consequences for early discovery channels at the LHC via a set of benchmark points designed to give rise to an observed event rate comparable to the reported CDMS-II data.Comment: Typos corrected and references adde

Assessing strength and power in resistance training

Maximal Dynamic Strength is usually assessed either by the one repetition maximum test (1-RM) or by a repetition maximum test with submaximal loads, which requires the application of a formula to estimate the value of 1-RM. This value is needed to establish the objective of resistance training: such as maximum strength, endurance strength, and/or explosive strength. However, both 1-RM and submaximal tests are unable to highlight the changes produced on power and velocity. This manuscript summarizes and reviews several common strength testing protocols and proposes a novel approach that may offer greater insight to hierarchical muscle functionalit

SOURCES OF INFORMATION FOR COMMERCIAL FARMS: USEFULNESS OF MEDIA AND PERSONAL SOURCES

The usefulness of several information sources is examined for U.S. farms with sales in excess of $100,000. The results indicate that crop/livestock-specific magazines and general farm magazines are the most useful information sources. Analyses indicate that the types and number of different commodities that the farm produced, as well as Internet use, are the most consistent predictors of attitudes toward various information sources. However, characteristics that explain attitudes toward different information sources vary substantially across the information sources considered.Farm Management,

THE USEFULNESS AND INFLUENCE OF INFORMATION SOURCES ON COMMERCIAL FARMS

The usefulness of several information sources is examined for U.S. farms with sales in excess of $100,000. The results indicate that crop/livestock-specific magazines and general farm magazines are the most useful information sources. Analyses indicate that the types and number of different commodities that the farm produced, as well as Internet use, are the most consistent predictors of attitudes toward various information sources. However, characteristics that explain attitudes toward different information sources vary substantially across the information sources.Farm Management,

Evaluation of the utility of sediment data in NASQAN (National Stream Quality Accounting Network)

Monthly suspended sediment discharge measurements, made by the USGS as part of the National Stream Quality Accounting Network (NASQAN), are analysed to assess the adequacy in terms of spatial coverage, temporal sampling frequency, accuracy of measurements, as well as in determining the sediment yield in the nation's rivers. It is concluded that the spatial distribution of NASQAN stations is reasonable but necessarily judgemental. The temporal variations of sediment data contain much higher frequencies than monthly. Sampling error is found to be minor when compared with other causes of data scatter which can be substantial. The usefulness of the monthly measurements of sediment transport is enhanced when combined with the daily measurements of water discharge. Increasing the sampling frequency moderately would not materially improve the accuracy of sediment yield determinations

Point Process Algorithm: A New Bayesian Approach for Planet Signal Extraction with the Terrestrial Planet Finder

The capability of the Terrestrial Planet Finder Interferometer (TPF-I) for planetary signal extraction, including both detection and spectral characterization, can be optimized by taking proper account of instrumental characteristics and astrophysical prior information. We have developed the Point Process Algorithm (PPA), a Bayesian technique for extracting planetary signals using the sine-chopped outputs of a dual nulling interferometer. It is so-called because it represents the system being observed as a set of points in a suitably-defined state space, thus providing a natural way of incorporating our prior knowledge of the compact nature of the targets of interest. It can also incorporate the spatial covariance of the exozodi as prior information which could help mitigate against false detections. Data at multiple wavelengths are used simultaneously, taking into account possible spectral variations of the planetary signals. Input parameters include the RMS measurement noise and the a priori probability of the presence of a planet. The output can be represented as an image of the intensity distribution on the sky, optimized for the detection of point sources. Previous approaches by others to the problem of planet detection for TPF-I have relied on the potentially non-robust identification of peaks in a "dirty" image, usually a correlation map. Tests with synthetic data suggest that the PPA provides greater sensitivity to faint sources than does the standard approach (correlation map + CLEAN), and will be a useful tool for optimizing the design of TPF-I.Comment: 17 pages, 6 figures. AJ in press (scheduled for Nov 2006