Evaluation of two terpene-derived polymers as consolidants for archaeological wood

The evaluation of two terpene-derived polymers, termed TPA6 and TPA7, as possible consolidants for archaeological wood was carried out. The overall objective of this work was to expand the non-aqueous treatment toolkit which is available for the conservation of the highly degraded Oseberg collection. The wood artefacts which were found on the Oseberg ship were treated with alum in the early twentieth century, leading to the formation of sulfuric acid and to the precarious state that they are in today. Some of these artefacts cannot be treated with conventional aqueous consolidants, like polyethylene glycol, due to their highly degraded and/or reconstructed nature. This study sought to examine the level of penetration of the polymers in archaeological wood and to evaluate their consolidative effect. Both TPA6 and TPA7 were soluble in isopropanol and had a Mw of 3.9 and 4.2 kDa respectively. A number of archaeological wood specimens were immersed in solutions of these polymers. Their penetration and effects were evaluated using weight and dimensional change, colour change, infrared spectroscopy, scanning electron microscopy and hardness tests. Both polymers successfully penetrated the wood specimens, with a higher concentration found on the surface versus the core. Additionally, both polymers appeared to increase the hardness of the specimen surfaces. Increasing the polymer concentration and soaking time in future investigations could potentially facilitate the penetration to the wood cores

Tert-butyldimethylsilyl chitosan synthesis and characterization by analytical ultracentrifugation, for archaeological wood conservation

The Oseberg ship is one of the most important archaeological testimonies of the Vikings. After excavation in 1904, the wooden gravegoods were conserved using alum salts. This resulted in extreme degradation of a number of the objects a hundred years later through acid depolymerisation of cellulose and lignin. The fragile condition of the artefacts requires a reconsolidation which has to be done avoiding water as solvent. We synthesized tert-butyldimethylsilyl (TBDMS) chitosan which is soluble in a 50:50 solution of ethyl acetate and toluene. Measurement of its molecular weight, to anticipate its penetration, provided a challenge as the density difference of the polymer and solvent was too small to provide adequate solute redistribution under a centrifugal field, so a two-stage process was implemented (i) determination of the weight-average molar mass of the aqueous soluble activated precursor, chitosan mesylate, Mw,mc using sedimentation equilibrium with the SEDFIT-MSTAR algorithm, and determination of the degree of polymerisation DP; (ii) measurement of the average degree of substitution DSTBDMS of the TBDMS group on each chitosan monosaccharide monomer unit using NMR, to augment the Mw,mc value to give the molar mass of the TBDMS-chitosan. For the preparation, we find Mw = 9.8 kg·mol−1, which is within the acceptable limit for penetration and consolidation of degraded wood. Future work will test this on archaeological wood from different sources

Comparative hydrodynamic characterisation of two hydroxylated polymers based on α-pinene- or oleic acid-derived monomers for potential use as archaeological consolidants

The Oseberg Viking ship burial is one of the most extensive collections of Viking wooden artefacts ever excavated in Norway. In the early twentieth century, many of these artefacts were treated with alum in order to preserve them, inadvertently leading to their current degraded state. It is therefore crucial to develop new bioinspired polymers which could be used to conserve these artefacts and prevent further disintegration. Two hydroxylated polymers were synthesised (TPA6 and TPA7), using α-pinene- and oleic acid-derived monomers functionalised with an acrylate moiety. Characterisation using biomolecular hydrodynamics (analytical ultracentrifugation and high precision viscometry) has shown that these polymers have properties which would potentially make them good wood consolidants. Conformation analyses with the viscosity increment (ν) universal hydrodynamic parameter and ELLIPS1 software showed that both polymers had extended conformations, facilitating in situ networking when applied to wood. SEDFIT-MSTAR analyses of sedimentation equilibrium data indicates a weight average molar mass Mw of (3.9 ± 0.8) kDa and (4.2 ± 0.2) kDa for TPA6 and TPA7 respectively. Analyses with SEDFIT (sedimentation velocity) and MultiSig however revealed that TPA7 had a much greater homogeneity and a lower proportion of aggregation. These studies suggest that both these polymers—particularly TPA7—have characteristics suitable for wood consolidation, such as an optimal molar mass, conformation and a hydroxylated nature, making them interesting leads for further research

Practical experiences with cross-disciplinary research – the case of Saving Oseberg.

Rappor