Fault Detection and Identification Methods Used for the LHC Cryomagnets and Related Cabling

Several methods for electrical fault location have been developed and tested. As part of the electrical quality assurance program for the LHC, certain wires have to be subjected to a (high) DC voltage for the testing of the insulation. With the time difference of spark-induced electromagnetic signals measured with an oscilloscope, fault localization within ± 10 cm has been achieved. Another method used, and adapted for particular needs, is the synthetic pulse time-domain reflectometry (TDR) with a vector network analyzer (VNA). This instrument has also been applied as a low frequency sweep impedance analyzer in order to measure fractional capacitances of cable assemblies where TDR was not applicable

Chromosomal control of non-gliadin proteins from the 70% ethanol extract of wheat endosperm

The non-gliadin fraction of the 70% ethanol extracts of compensated nulli-tetrasomics and ditelosomics of Triticum aestivum cv. Chinese Spring has been analyzed by combined electrofocusing and electrophoresis. Seventeen of the 21 protein map components of the euploid have been ascribed to eight chromosomes: 4A, 3BS, 6BS, 7BS, 3D, 4D, 5D and 7DS. The relationship of the different map components with other proteins previously associated with the same chromosomes is discusse

A puzzling Mule Coin from the Parabita Hoard: a Material Characterisation

In this research, we report on the compositional, microstructural and crystallographic properties of a lead coin which has been regarded for many years as a genuine silver coin minted in the Southern Italy in the course of the 4th century BC. The material characterisation of this object allowed detecting an ancient forging technology, not previously reported, which was meant for the silvering of lead substrates The data collected have disclosed a contemporary counterfeiting procedure based on a metal coating process onto a Pb substrate. This coating has been identified as a bi-layer with a Cu innermost and an Ag outermost visible layer. As far as the coating application technique is concerned, the gathered evidence has clearly indicated that the original appearance of this artifact cannot be explained in terms of any of the established methods for the growth of an artificially silvered coating in classical antiquity. This technology is now being explained in terms of modern, fully non destructive scientific methods.Comment: 9 pages including 8 figures. To be presented at the Cavallino Archaeometry Workshop 2006, Cavallino (Lecce - Italy) - May 22-25, 200

The Commissioning of the LHC Test String 2

String 2 [1,2] is a full-size model of an LHC cell of the regular part of the arc. It is composed of six dipole magnets with their correctors, two short straight sections with their orbit and lattice corrector magnets, and a cryogenic distribution line running alongside the magnets. The commissioning of String 2 Phase 1, with one half-cell and the following quadrupole, has started in April 2001. As for String 1 [3], the facility was built to individually validate the LHC systems and to investigate their collective behaviour during normal operation (pump-down, cool-down and powering) as well as during exceptional conditions such as quenches. String 2 is a stepping stone towards the commissioning of the first sector (one eight of LHC) planned for 2004. It is expected to yield precious information on the infrastructures, the installation, the tooling and the procedures for the assembly, the testing and the commissioning of the individual systems, as well as the global commissioning of the technical systems. This paper describes the procedures followed for the commissioning and details the preparation for the first cool-down and for the powering

First Powering of the LHC Test String 2

String 2 is a full-size model of a regular cell in an LHC arc. In the first phase, three dipole magnets and two quadrupole magnets have been assembled in String 2 and commissioning started in April 2001. By the beginning of 2002 three pre-series dipole magnets will be added to complete the cell. As for its predecessor String 1, the facility was built to individually validate the LHC systems and to investigate their collective behaviour for normal operation with the magnets at a temperature of 1.9 K, during transients as well as during exceptional conditions. String 2 is a precious milestone before installation and commissioning of the first LHC sector (1/8 of the machine) in 2004, with respect to infrastructure, installation, tooling and assembly procedures, testing and commissioning of individual systems, as well as the global commissioning of the technical systems. This paper describes the commissioning, and retraces the first powering history

Green Tattoo Pre-Operative Renal Embolization for Robotic-Assisted and Laparoscopic Partial Nephrectomy: A Practical Proof of a New Technique

Background: Our aim is to describe a new mixed indocyanine-non-adhesive liquid embolic agent (Onyx-18) pre-operative renal embolization technique for assisted-robotic and laparoscopic partial nephrectomy with near-infra-red fluorescence imaging. (2) Methods: Thirteen patients with biopsy-proven renal tumors underwent pre-operative mixed indocyanine–ethylene vinyl alcohol (EVOH) embolization (Green-embo) between June 2021 and August 2022. All pre-operative embolizations were performed with a super selective stop-flow technique using a balloon microcatheter to deliver an indocyanine-EVOH mixture into tertiary order arterial branch feeders and the intra-lesional vascular supply. Efficacy (evaluated as complete embolization, correct tumor mapping on infra-red fluorescence imaging and clamp-off surgery) and safety (evaluated as complication rate and functional outcomes) were primary goals. Clinical and pathological data were also collected. (3) Results: Two male and eleven female patients (mean age 72 years) received pre-operative Green-embo. The median tumor size was 29 mm (range 15–50 mm). Histopathology identified renal cell carcinoma (RCC) in 9 of the 13 (69%) patients, oncocytoma in 3 of the 13 (23%) patients and sarcomatoid RCC in 1 of the 13 (8%) patients. Lesions were equally distributed between polar, meso-renal, endo- and exophytic locations. Complete embolization was achieved in all the procedures. A correct green mapping was identified during all infra-red fluorescence imaging. All patients were discharged on the second day after the surgery. The median blood loss was 145 cc (10–300 cc). No significant differences were observed in serum creatinine levels before and after the embolization procedures. (4) Conclusions: The Green-tattoo technique based on a mixed indocyanine-non-adhesive liquid embolic agent (Onyx-18) is a safe and effective pre-operative embolization technique. The main advantages are the excellent lesion mapping for fluorescence imaging, reduction in surgical time, and definitive, complete and immediate tumor devascularization based on the deep Onyx-18 penetration, leading to a very low intra-operative blood loss

Parameter identification through mode isolation for reaction-diffusion systems on arbitrary geometries

We present a computational framework for isolating spatial patterns arising in the steady states of reaction-diffusion systems. Such systems have been used to model many natural phenomena in areas such as developmental and cancer biology, cell motility and material science. In many of these applications, often one is interested in identifying parameters which will lead to a particular pattern for a given reaction-diffusion model. To attempt to answer this, we compute eigenpairs of the Laplacian on a variety of do- mains and use linear stability analysis to determine parameter values for the system that will lead to spatially inhomogeneous steady states whose patterns correspond to particular eigenfunctions. This method has previously been used on domains and surfaces where the eigenvalues and eigenfunctions are found analytically in closed form. Our contribution to this methodology is that we numerically compute eigenpairs on arbitrary domains and surfaces. Here we present examples and demonstrate that mode isolation is straightforward especially for low eigenvalues. Additionally we see that the inhomogeneous steady state can be a linear combination of eigenfunctions. Finally we show an example suggesting that pattern formation is robust on similar surfaces in cases that the surface either has or does not have a boundary

Ejaculation-sparing thulium laser enucleation of the prostate (ES-ThuLEP): outcomes on a large cohort

Purpose: To assess the effects of a new ejaculation-sparing thulium laser enucleation of the prostate (ES-ThuLEP) technique on sexual functions and micturition, in patients with lower urinary tract symptoms secondary to benign prostatic hyperplasia (BPH) and to evaluate how the surgical technique of ES-ThuLEP can lead to ejaculation preservation. Methods: A prospective study was carried out between January 2015 and January 2018 on patients with surgical indication for BPH, who wished to preserve ejaculation. The patients were treated with ES-ThuLEP and were evaluated before and 3 and 6 months after surgery. Three validated questionnaires (ICIQ-MLUTSsex, IIEF-5 and IPSS) were used to assess changes in ejaculation, erectile function and urinary symptoms. Uroflowmetry (Qmax and Qavg), post-void residual volume and voided volume were also evaluated, to assess micturition improvement. Patients with moderate to severe erectile dysfunction were excluded. Statistical analysis was performed with the Student\u2019s t test, Chi-square test and logistic regression analysis. Results: Two hundred and eighty three patients were enrolled. Ejaculation was spared in 203 and 219 patients at 3 and 6 months after surgery. No significant differences were observed between erectile function before and after surgery: baseline IIEF-5 = 16.2 \ub1 4.47 vs 16.7 \ub1 2.9 (p = 0.419) and 17.7 \ub1 3.2 (p = 0.410) at 3 and 6 months. Significant improvement in urinary symptoms was achieved: baseline IPSS = 19.4 \ub1 7.24 vs 5.8 \ub1 4.3 (p = 0.032) and 3.9 \ub1 4.1 (p = 0.029) at 3 and 6 months. Conclusion: ES-ThuLEP effectively preserved ejaculation in over two thirds of the patients without compromising micturition improvement or erectile function. ES-ThuLEP could be a valid treatment option for BPH in young and sexually active men

First Results and Status of the LHC Test String 2

After the commissioning of String 2 Phase1 and the powering of the main circuits in autumn 2001, a short yet vigorous experimental program was carried-out to validate the final design choices for the technical systems of LHC. This program included the investigation of thermo-hydraulics of quenches quench propagation, power converter controls and tracking between power converters, as well as the measurement of currents induced in the beam screen after a quench and crossing the interconnects. Parameters significant for the LHC, such as heat loads, were also measured. During the winter shutdown the String was completed to a full cell with the addition of three pre-series dipoles (Phase 2). After a short description of the layout of Phase 1 and Phase 2, the results of the experiments are presented and the future experimental program is outlined