HBM4EU chromates study - Usefulness of measurement of blood chromium levels in the assessment of occupational Cr(VI) exposure

Occupational exposures to hexavalent Chromium (Cr(VI)) can occur in welding, hot working stainless steel processing, chrome plating, spray painting and coating activities. Recently, within the human biomonitoring for Europe initiative (HBM4EU), a study was performed to assess the suitability of different biomarkers to assess the exposure to Cr(VI) in various job tasks. Blood-based biomarkers may prove useful when more specific information on systemic and intracellular bioavailability is necessary. To this aim, concentrations of Cr in red blood cells (RBC-Cr) and in plasma (P–Cr) were analyzed in 345 Cr(VI) exposed workers and 175 controls to understand how these biomarkers may be affected by variable levels of exposure and job procedures. Compared to controls, significantly higher RBC-Cr levels were observed in bath plating and paint application workers, but not in welders, while all the 3 groups had significantly greater P–Cr concentrations. RBC-Cr and P–Cr in chrome platers showed a high correlation with Cr(VI) in inhalable dust, outside respiratory protective equipment (RPE), while such correlation could not be determined in welders. In platers, the use of RPE had a significant impact on the relationship between blood biomarkers and Cr(VI) in inhalable and respirable dust. Low correlations between P–Cr and RBC-Cr may reflect a difference in kinetics. This study showed that Cr-blood-based biomarkers can provide information on how workplace exposure translates into systemic availability of Cr(III) (extracellular, P–Cr) and Cr(VI) (intracellular, RBC-Cr). Further studies are needed to fully appreciate their use in an occupational health and safety context

Biomonitoring of occupational exposure to bisphenol A, bisphenol S and bisphenol F: A systematic review

Bisphenol A (BPA) and its substitutes bisphenol S (BPS) and bisphenol F (BPF) are endocrine disrupting chemicals widely used in the production of polycarbonate plastics, epoxy resins and thermal papers. The aim of the review was to identify occupational studies using human biomonitoring (HBM) as a tool for bisphenol exposure assessment and to characterize research gaps on the topic as part of the HBM4EU project. Hence, a systematic literature search using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology was conducted for articles published between 2000 and 27th March 2020 across three databases (PubMed, Scopus and Web of Science). Thirty studies on the occupational HBM of BPA met the inclusion criteria. Regarding BPS and BPF, only 4 and 2 publications were retrieved, respectively. Fifty-seven percent (57%) of the studies selected for BPA were conducted in Asia whereas half of BPS and BPF studies were undertaken in Europe. Studies on BPA in plastic and epoxy resin sectors were infrequent in Europe while Asian data showed higher exposure when the substance is employed as raw material. The main data on BPS were among cashiers while BPF data were available from incinerator workers. Several research gaps have been identified: (i) shortage of HBM studies on occupational exposure, especially to BPS and BPF; (ii) different methodological designs making suitable comparisons between studies difficult; and (iii) only few studies conducted on the industrial applications of bisphenols outside Asia. This review highlights the lack of recent occupational HBM studies on bisphenols and the need for a harmonized approach to acquire reliable data. Considering the increasing replacement of BPA by BPS and BPF, it is of relevance to evaluate the exposure to these substances and the impact of the available risk management measures on workers exposure and possible health risk

Biomonitoring of occupational exposure to phthalates: A systematic review

Introduction: Phthalates, a group of ubiquitous industrial chemicals, have been widely used in occupational settings, mainly as plasticizers in a variety of applications. Occupational exposure to different phthalates has been studied in several occupational settings using human biomonitoring (HBM). Aim: To provide a comprehensive review of the available literature on occupational exposure to phthalates assessed using HBM and to determine future data needs on the topic as part of the HBM4EU project. Methods: A systematic search was carried out in the databases of Pubmed, Scopus, and Web of Science for articles published between 2000 and September 4, 2019 using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A total of 22 studies on the occupational HBM of phthalates was considered suitable for review. Results and discussion: Among the reviewed studies, 19 (86%) focused on DEHP, an old phthalate that is now subject to authorization and planned to be restricted in the EU. Concentrations of MEHHP, one of its metabolites, varied up to 13-fold between studies and across sectors when comparing extreme geometric means, ranging from 11.6 (similar to the general populations) to 151 μg/g creatinine. Only 2 studies focused on newer phthalates such as DiNP and DPHP. Concerning the geographical distribution, 10 studies were performed in Europe (including 6 in Slovakia), 8 in Asia, and 4 in North America, but this distribution is not a good reflection of phthalate production and usage levels worldwide. Most HBM studies were performed in the context of PVC product manufacturing. Future studies should focus on: i) a more uniform approach to sampling timing to facilitate comparisons between studies; ii) newer phthalates; and iii) old phthalates in waste management or recycling. Conclusion: Our findings highlight the lack of recent occupational HBM studies on both old and new phthalate exposure in European countries and the need for a harmonized approach. Considering the important policy actions taken in Europe regarding phthalates, it seems relevant to evaluate the impact of these actions on exposure levels and health risks for workers

HBM4EU chromates study - the measurement of hexavalent and trivalent chromium in exhaled breath condensate samples from occupationally exposed workers across Europe

The aim of this study was to investigate the practicability of exhaled breath condensate (EBC) as a biological matrix to detect and measure hexavalent chromium (Cr(VI)) and trivalent chromium (Cr(III)) in workers occupationally exposed to Cr(VI). EBC samples were collected from workers in France, Finland, Italy, The Netherlands and the United Kingdom from three different target activities: chrome platers, stainless steel welders and surface treatment workers. Pre and post working week EBC samples were collected from 177 exposed workers and 98 unexposed workers (control group). Hyphenated chromatography systems with inductively coupled plasma - mass spectrometry (ICP-MS) were for the analysis. The results showed that the occupationally exposed workers had significantly higher levels of Cr(VI) and Cr(III) than the control group. Chrome platers exhibited the highest Cr(VI) levels in their EBC samples, with a significant increase from their pre to post samples for both Cr(VI) and Cr(III). A significant difference was also found between pre and post EBC samples for Cr(III) in welders. This study has shown that EBC has the potential to be a valid, non-invasive biological matrix to assess occupational exposure to Cr(VI) and Cr(III) for biological monitoring assessment, with the ability to detect low level inhalation exposures

HBM4EU diisocyanates study – results from a collaborative European human biological monitoring study on occupational exposure

Diisocyanates have long been a leading cause of occupational asthma in Europe, and they are now restricted under the REACH regulation. As part of the European Human Biomonitoring project (HBM4EU), we conducted an occupational exposure survey on diisocyanates in five European countries. 116 workers were recruited across four job categories: (1) Use of diisocyanates-based glues, adhesives or sealants; (2) Polyurethane coating of large surfaces; (3) Spray application of urethane foam; (4) Spray coating of vehicles. Fifty controls (within the same companies) were also recruited. The study collected urine samples (analysed for diisocyanate-derived diamines and lysine conjugates), blood samples (analysed for diisocyanate-specific antibodies, inflammatory markers, and diisocyanate-specific haemoglobin adducts), buccal cells (micronucleus analysis) and measured fractional exhaled nitric oxide (FeNO). In addition, occupational hygiene measurements (air monitoring and skin wipe samples) and questionnaires were collected. Initial results showed significant airborne exposures for some tasks (spraying polyurethane foam insulation), with elevated urinary diamine levels compared to controls (p<0.001), and detection of the specific MDI-lysine conjugate. Most workers did not show increased FeNO, but some individuals had elevated results (controls max 30 ppb (n=49), workers max 161 ppb (n=108). Further ongoing data analysis will be presented.This work has received external funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 733032 and received co-funding from the author’s organizations and/or Ministries. The full HBM4EU diisocyanates study team has previously been acknowledged in the study protocol (https://doi.org/10.3390/ijerph19148811).info:eu-repo/semantics/publishedVersio

HBM4EU chromates study – PFAS exposure in electroplaters and bystanders

The study aims to reveal the exposure to perfluoroalkyl substances (PFAS) in workers in different industry sectors with exposures to hexavalent chromium (Cr(VI)). The PFAS exposure of in total 172 individuals from 4 countries was assessed by the determination of 8 perfluoroalkyl carboxylic acids and 4 perfluoroalkyl sulfonic acids in plasma samples. The participants were 52 chrome plating workers, 43 welders, 3 surface treating workers and 74 workers without any occupational Cr exposure as controls. Significant differences between workers with Cr exposure and controls were found for the perfluoroalkyl sulfonic acids, particularly for perfluorooctane sulfonic acid (PFOS). The median and maximum levels were, respectively, 4.83 and 789&nbsp;μg/l for chrome plating workers, 4.97 and 1513&nbsp;μg/l for welders, and 3.65 and 13.9&nbsp;μg/l for controls. The considerably high PFOS exposure in Cr platers and welders can be explained by the former application of PFOS as mist suppressants in electroplating baths, which resulted in an exposure of the directly involved operators, but also of welders performing maintenance and repair service at these workplaces

HBM4EU Chromates Study: Determinants of Exposure to Hexavalent Chromium in Plating, Welding and Other Occupational Settings

Work-related exposures in industrial processing of chromate (chrome plating, surface treatment and welding) raise concern regarding the health risk of hexavalent chromium (Cr(VI)). In this study, performed under the HBM4EU project, we focused on better understanding the determinants of exposure and recognising how risk management measures (RMMs) contribute to a reduction in exposure. HBM and occupational hygiene data were collected from 399 workers and 203 controls recruited in nine European countries. Urinary total chromium (U-Cr), personal inhalable and respirable dust of Cr and Cr(VI) and Cr from hand wipes were collected. Data on the RMMs were collected by questionnaires. We studied the association between different exposure parameters and the use of RMMs. The relationship between exposure by inhalation and U-Cr in different worker groups was analysed using regression analysis and found a strong association. Automatisation of Cr electroplating dipping explained lower exposure levels in platers. The use of personal protective equipment resulted in lower U-Cr levels in welding, bath plating and painting. An effect of wearing gloves was observed in machining. An effect of local exhaust ventilation and training was observed in welding. Regression analyses showed that in platers, exposure to air level of 5 µg/m3 corresponds to U-Cr level of 7 µg/g creatinine. In welders, the same inhalation exposure resulted in lower U-Cr levels reflecting toxicokinetic differences of different chromium species

The HBM4EU chromates study - Outcomes and impacts on EU policies and occupational health practices

Within the EU human biomonitoring initiative (HBM4EU), a targeted, multi-national study on occupational exposure to hexavalent chromium (Cr(VI)) was performed. Cr(VI) is currently regulated in EU under REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) and under occupational safety and health (OSH) legislation. It has recently been subject to regulatory actions to improve its risk management in European workplaces. Analysis of the data obtained within the HBM4EU chromates study provides support both for the implementation of these regulatory actions and for national enforcement programs and may also contribute to the updating of occupational limit values (OELs) and biological limit values for Cr(VI). It also provides useful insights on the contribution of different risk management measures (RMMs) to further reduce the exposure to Cr(VI) and may support the evaluation of applications for authorisation under REACH. Findings on chrome platers' additional per- and polyfluoroalkyl substances (PFAS) exposure highlight the need to also pay attention to this substance group in the metals sector. A survey performed to evaluate the policy relevance of the HBM4EU chromates study findings supports the usefulness of the study results. According to the responses received from the survey, the HBM4EU chromates study was able to demonstrate the added value of the human biomonitoring (HBM) approach in assessment and management of occupational exposure to Cr(VI). For future occupational studies, we emphasise the need for engagement of policy makers and regulators throughout the whole research process to ensure awareness, relevance and uptake of the results in future policies