Quality Assessment of Printable Strain Hardening Cementitious Composites Manufactured in Two Different Printing Facilities

Over the past few years, several studies have shown the potential of three-dimensional concrete printing (3DCP) for applications in building and civil engineering. However, only a few studies have compared the properties of the fresh printing material and the quality of the printed elements from different printing facilities. Variations in the manufacturing conditions caused by the mixing procedures, the pumping device and the nozzle shape and/or dimensions may influence the quality of the printed elements. This study investigates the differences in the fresh and hardened properties of a printing material tested in two different printing facilities. The pump pressure and temperature experienced by the printing material during the printing session are monitored real-time. Hardened properties are measured for the printed elements, such as the bending capacity, the apparent density, and the air void content. The research shows that two different printing facilities may result in printed elements with relative differences in flexural strength and volumetric density of 49% and 7%, respectively

Perfeccionismo no transtorno obsessivo-compulsivo e nos transtornos alimentares

OBJETIVO: Este estudo tem dois objetivos principais. Primeiro, avaliar as dimensões do perfeccionismo no transtorno obsessivo-compulsivo e nos transtornos alimentares em comparação com duas amostras controle: psiquiátrica (depressão/ansiedade) e não clínica. Segundo, avaliar se o perfeccionismo é um traço de personalidade especificamente relacionado com estas diferentes condições clínicas. MÉTODO: 39 pacientes com transtorno obsessivo-compulsivo, 24 com transtornos alimentares, 65 com um diagnóstico de depressão e/ou ansiedade (todos estes pacientes encontravam-se em regime de ambulatório) e 70 controles não clínicos completaram a versão portuguesa da Multidimensional Perfectionism Scale. RESULTADOS: Comparativamente à amostra não clínica, todas as amostras clínicas apresentaram níveis significativamente mais elevados na Multidimensional Perfectionism Scale total, no Perfeccionismo Auto-Orientado e no Perfeccionismo-Socialmente-Prescrito. Não houve diferenças estatisticamente significativas no Perfeccionismo-Auto-Orientado e na Multidimensional Perfectionism Scale total nas três amostras clínicas. No entanto, a amostra com transtornos alimentares apresentou níveis significativamente mais elevados de Perfeccionismo-Socialmente-Prescrito, comparativamente à transtornos alimentares e à amostra psiquiátrica (depressão/ansiedade). CONCLUSÃO: O perfeccionismo revelou estar associado a uma grande variedade de condições psicopatológicas. Contudo, as diferenças encontradas entre a amostra de transtornos alimentares, de transtorno obsessivo-compulsivo e a psiquiátrica no Perfeccionismo-Socialmente-Prescrito necessitam de investigação subsequente no sentido de clarificar a especificidade desta dimensão com os transtornos alimentares

Effect of Polypropylene fibres on the Workability parameters of Extrudable Cementitious Material

Additive manufacturing in construction industry has been introduced as an aspiration for a more sustainable built environment and currently evolving with high demand amongst researches. This study is an investigation of the influence of polypropylene (PP) fibre addition on the workability parameters of a new extrudable concrete mixture. As the quality of final printed structure prominently depends on the fresh state properties of concrete, this investigation mainly focused on the rheological properties such as workability (flow), setting time, extrudability and buildability. These parameters were systematically investigated through a small scale experimental process with time after mixing. The selected control mix with Ground granulated blast furnace slag (GGBS) and Silica Fume (SF) was used in this analysis. The Control cementitious specimens without fibre inclusion and with fibre addition in different volume fraction of binder, ranging from 0.5% to 3% were printed. The results showed that the fibre addition of 0, 0.5 and 1.0% have the better flowability and extrudability compared to 1.5, 2 and 3%. Also, reduction in the print quality was assessed visually with increasing fibre percentage. However, results indicated that the initial setting time is comparatively low for those mixes with higher fibre inclusion which is required for better bond strength between layers. Moreover, higher fibre content caused better buildability and shape retention in the extruded samples

An RxLR effector from phytophthora infestans prevents re-localisation of two plant NAC transcription factors from the endoplasmic reticulum to the nucleus

The plant immune system is activated following the perception of exposed, essential and invariant microbial molecules that are recognised as non-self. A major component of plant immunity is the transcriptional induction of genes involved in a wide array of defence responses. In turn, adapted pathogens deliver effector proteins that act either inside or outside plant cells to manipulate host processes, often through their direct action on plant protein targets. To date, few effectors have been shown to directly manipulate transcriptional regulators of plant defence. Moreover, little is known generally about the modes of action of effectors from filamentous (fungal and oomycete) plant pathogens. We describe an effector, called Pi03192, from the late blight pathogen Phytophthora infestans, which interacts with a pair of host transcription factors at the endoplasmic reticulum (ER) inside plant cells. We show that these transcription factors are released from the ER to enter the nucleus, following pathogen perception, and are important in restricting disease. Pi03192 prevents the plant transcription factors from accumulating in the host nucleus, revealing a novel means of enhancing host susceptibility

Functionally Redundant RXLR Effectors from <em>Phytophthora infestans</em> Act at Different Steps to Suppress Early flg22-Triggered Immunity

Genome sequences of several economically important phytopathogenic oomycetes have revealed the presence of large families of so-called RXLR effectors. Functional screens have identified RXLR effector repertoires that either compromise or induce plant defense responses. However, limited information is available about the molecular mechanisms underlying the modes of action of these effectors in planta. The perception of highly conserved pathogen- or microbe-associated molecular patterns (PAMPs/MAMPs), such as flg22, triggers converging signaling pathways recruiting MAP kinase cascades and inducing transcriptional re-programming, yielding a generic anti-microbial response. We used a highly synchronizable, pathogen-free protoplast-based assay to identify a set of RXLR effectors from Phytophthora infestans (PiRXLRs), the causal agent of potato and tomato light blight that manipulate early stages of flg22-triggered signaling. Of thirty-three tested PiRXLR effector candidates, eight, called Suppressor of early Flg22-induced Immune response (SFI), significantly suppressed flg22-dependent activation of a reporter gene under control of a typical MAMP-inducible promoter (pFRK1-Luc) in tomato protoplasts. We extended our analysis to Arabidopsis thaliana, a non-host plant species of P. infestans. From the aforementioned eight SFI effectors, three appeared to share similar functions in both Arabidopsis and tomato by suppressing transcriptional activation of flg22-induced marker genes downstream of post-translational MAP kinase activation. A further three effectors interfere with MAMP signaling at, or upstream of, the MAP kinase cascade in tomato, but not in Arabidopsis. Transient expression of the SFI effectors in Nicotiana benthamiana enhances susceptibility to P. infestans and, for the most potent effector, SFI1, nuclear localization is required for both suppression of MAMP signaling and virulence function. The present study provides a framework to decipher the molecular mechanisms underlying the manipulation of host MAMP-triggered immunity (MTI) by P. infestans and to understand the basis of host versus non-host resistance in plants towards P. infestans

The search for transient astrophysical neutrino emission with IceCube-DeepCore

We present the results of a search for astrophysical sources of brief transient neutrino emission using IceCube and DeepCore data acquired between 2012 May 15 and 2013 April 30. While the search methods employed in this analysis are similar to those used in previous IceCube point source searches, the data set being examined consists of a sample of predominantly sub-TeV muon-neutrinos from the Northern Sky (-5 degrees < delta < 90 degrees) obtained through a novel event selection method. This search represents a first attempt by IceCube to identify astrophysical neutrino sources in this relatively unexplored energy range. The reconstructed direction and time of arrival of neutrino events are used to search for any significant self-correlation in the data set. The data revealed no significant source of transient neutrino emission. This result has been used to construct limits at timescales ranging from roughly 1 s to 10 days for generic soft-spectra transients. We also present limits on a specific model of neutrino emission from soft jets in core-collapse supernovae

Individual Variations in Maternal Care Early in Life Correlate with Later Life Decision-Making and c-Fos Expression in Prefrontal Subregions of Rats

Early life adversity affects hypothalamus-pituitary-adrenal axis activity, alters cognitive functioning and in humans is thought to increase the vulnerability to psychopathology–e.g. depression, anxiety and schizophrenia- later in life. Here we investigated whether subtle natural variations among individual rat pups in the amount of maternal care received, i.e. differences in the amount of licking and grooming (LG), correlate with anxiety and prefrontal cortex-dependent behavior in young adulthood. Therefore, we examined the correlation between LG received during the first postnatal week and later behavior in the elevated plus maze and in decision-making processes using a rodent version of the Iowa Gambling Task (rIGT). In our cohort of male and female animals a high degree of LG correlated with less anxiety in the elevated plus maze and more advantageous choices during the last 10 trials of the rIGT. In tissue collected 2 hrs after completion of the task, the correlation between LG and c-fos expression (a marker of neuronal activity) was established in structures important for IGT performance. Negative correlations existed between rIGT performance and c-fos expression in the lateral orbitofrontal cortex, prelimbic cortex, infralimbic cortex and insular cortex. The insular cortex correlations between c-fos expression and decision-making performance depended on LG background; this was also true for the lateral orbitofrontal cortex in female rats. Dendritic complexity of insular or infralimbic pyramidal neurons did not or weakly correlate with LG background. We conclude that natural variations in maternal care received by pups may significantly contribute to later-life decision-making and activity of underlying brain structures

Cross-sectional associations between occupational factors and musculoskeletal pain in women teachers, nurses and sonographers

A. Technical measurements of the physical workload. (DOCX 18 kb

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration