Solar power satellite rectenna design study: Directional receiving elements and parallel-series combining analysis

Rectenna conversion efficiencies (RF to dc) approximating 85 percent were demonstrated on a small scale, clearly indicating the feasibility and potential of efficiency of microwave power to dc. The overall cost estimates of the solar power satellite indicate that the baseline rectenna subsystem will be between 25 to 40 percent of the system cost. The directional receiving elements and element extensions were studied, along with power combining evaluation and evaluation extensions

Low temperature growth and electrical characterization of insulators for GaAs MISFETS

Progress in the low temperature growth of oxides and layers on GaAs and the detailed electrical characterization of these oxides is reported. A plasma anodization system was designed, assembled, and put into operation. A measurement system was assembled for determining capacitance and conductance as a function of gate voltage for frequencies in the range from 1 Hz to 1 MHz. Initial measurements were carried out in Si-SiO2 capacitors in order to test the system and in GaAs MIS capacitors abricated using liquid anodization

Research on gallium arsenide diffused junction solar cells

The feasibility of using bulk GaAs for the fabrication of diffused junction solar cells was determined. The effects of thermal processing of GaAs was studied, and the quality of starting bulk GaAs for this purpose was assessed. These cells are to be made by open tube diffusion techniques, and are to be tested for photovoltaic response under AMO conditions

Diffused P+-N solar cells in bulk GaAs

Recently melt grown GaAs, made by liquid encapsulation techniques, has become available. This material is of sufficiently good quality to allow the fabrication of solar cells by direct diffusion. Results obtained with p(+)/n junction solar cells made by zinc diffusion are described. The quality of bulk GaAs for this application is evaluated

Encapsulated diffusion of sulphur into InP

This talk outlines a simple process for the fabrication of n(+)-p solar cells in indium phosphide. Large area cells (greater than 0.25 sq cm) have been made by this process, with a photovoltaic conversion efficiency of 15.21 percent under AM0 conditions of illumination. An ideality factor of 1.1 and a saturation current density of 8 x 10 to the minus 15th power A/sq cm have been observed for these cells. The technique for cell fabrication involves the diffusion of sulfur into InP by an open tube process, and gives highly reproducible results from run to run. A vacuum-deposited layer of gallium sulphide (Ga2S3) was used as the source for sulfur diffusion, with a chemically vapor deposited SiO2 cap layer to prevent decomposition of the InP surface during heat treatment. Diffusions were carried out in a flowing nitrogen ambient at 585 to 708 C, and characterized by their surface carrier concentration and the diffusion constant. The diffusion profile for sulfur in InP is estimated to be of the complementary error function type. The activation energy of the diffusion was estimated to be 1.94 eV. The technique described here is ideally suited for the fabrication of shallow n(+)-p junctions in InP, and has been used for space-borne solar cells

Extending Qualitative Spatial Theories with Emergent Spatial Concepts: An Automated Reasoning Approach

Qualitative Spatial Reasoning is an exciting research field of the Knowledge Representation and Reasoning paradigm whose application often requires the extension, refinement or combination of existent theories (as well as the associated calculus). This paper addresses the issue of the sound spatial interpretation of formal extensions of such theories; particularly the interpretation of the extension and the desired representational features. The paper shows how to interpret certain kinds of extensions of Region Connection Calculus (RCC) theory. We also show how to rebuild the qualitative calculus of these extensions.Junta de Andalucía TIC-606

Solar cells in bulk InP using an open tube diffusion process

A simple open tube diffusion technique for the fabrication of n+p junction solar cells is described. Large area (greater than 0.25 square cm) solar cells have been made by this process with a photovoltaic conversion efficiency of 15.2 percent under simulated AMO illumination. An ideality factor is 1.04 and a saturation current density of 9.6 times 10 to the minus 16th power A/square cm have been observed for these cells. These are the lowest (best) values reported to date for diffused structures in bulk InP

Partial crack closure under block loading

Fatigue crack propagation tests under high-low and low-high block loading sequences have been performed in aluminium alloy specimens. The tests were carried out at constant [Delta]K conditions. Two stress ratios were analysed: R = 0.05 and R = 0.4. Crack closure was monitored in all tests by the compliance technique using a pin microgauge. The observed transient post load step behaviour is discussed in terms of the load change magnitude, [Delta]K baseline levels and stress ratio. The crack closure level was obtained and compared with the crack growth transients. A good agreement between experimental and predicted crack growth rates is obtained when the partial crack closure effect is properly taken into account. Therefore, plasticity-induced crack closure plays an important role on the load interaction effects observed in aluminium alloys.http://www.sciencedirect.com/science/article/B6V35-4S01WM6-1/1/55ac18d861098dc98cd7150c4c5fa4d

Allelic variation observed at one microsatellite locus between the two synonym grape cultivars Black Currant and Mavri Corinthiaki

Research NoteBlack Currant and Mavri Corinthiaki are considered synonyms for Corinthe Noir, a parthenocarpic seedless raisin cultivar. No differences between them were found by RAPD analysis with 1 1 primers. They also have the same genotype in 15 out of 16 microsatellite loci, demonstrating the Black Currant and Mavri Corinthiaki are essentially identical. Nevertheless, a difference was observed in one allele at one locus (VVMD7): the Black Currant genotype is 240:246 while the Mavri Corinthiaki genotype is 240:248. A mutation in the microsatellite sequence might be responsible for that difference. Possible consequences of such mutations are discussed