115 research outputs found
Concrete heritage : challenges in conservation
The development of concrete in the 19th & 20th centuries led to new possibilities and advancement in construction. Concrete was exploited to address the post-war needs for economical and faster construction. Significant reinforced concrete structures are recognized as cultural heritage. Long term durability problems present conservation challenges and the understanding of failure mechanisms is fundamental for restoration. The diagnosis of historic structures, materials investigation, monitoring and assessment are important steps towards the understanding of deterioration and appraisal of concrete heritage. Long-term effects of conservation and repair also need to be considered. The assessment of concrete heritage is addressed through military and industrial heritage concrete structures in Malta, including coastal structures in aggressive environments. A methodology for appraisal is proposed taking into consideration materials and structural performance and degradation mechanisms.peer-reviewe
Creating a roadmap towards circularity in the built environment
Construction and Demolition (C&D) Waste is a priority waste stream due to the substantial amounts of such waste generated. There is a high potential for reuse and recycling of waste and byproducts. The Construction and Demolition Waste Strategy for Malta supports the transition towards a more circular economy and closes the loop of construction products life cycle. The quality of recycling and recovery of this waste stream needs to be improved, for market conditions to be developed to increase the demand for secondary raw materials. The paper reviews the strategic framework leading to the design, development and eventual implementation of National Standards for Excavation, Construction and Demolition Waste in Malta. The Standards presented, consist of two complimentary documents, developed to cover deconstruction, excavation and classification of waste and recycled aggregate. Standard SM810—Recycling-oriented Deconstruction, Controlled Excavation Works and Classification of Waste: Requirements for planning and execution, sets to prioritise the reduction of waste generation and highlights the importance of saving raw material resources. Standard SM820—Classification of Recycled Aggregate, sets out technical engineering attributes for the classification of waste aggregate, enabling its exploitation as a resource. A regulatory and legislative framework was developed for the implementation of the Standards. This important development sets the scene for the effective implementation of Circular Economy in the Construction Industry in the Maltese Islands.peer-reviewe
Early age performance and mechanical characteristics of recycled PET fibre reinforced concrete
In this study the performance of concrete reinforced with fibres produced from waste non-biodegradable plastic, polyethylene terephthalate (PET), has been thoroughly investigated. The novelty of the study, to the authors’ knowledge, consists in the fact that fibres have been employed as directly shredded from collected waste plastic bottles, with no processing through, e.g., plastic melting and fibre spinning. Moreover, a comprehensive investigation has been herein undertaken, which ranges from the identification of the mechanical behaviour of the fibres to the assessment of their bond with the matrix and of the early age and hardened state properties of the recycled PET fibre reinforced concrete.
Different types of shredded recycled PET fibres, straight and deformed, together with different fibre lengths, 30 mm and 50 mm, have been assessed, for varying percentage addition in concrete. The tensile properties and pull out characteristics of the fibres have been determined. The effects of fibres in mitigating plastic and restrained drying shrinkage cracking were then assessed and, finally, the compressive strength and the flexural performance of the fibre concrete were determined. The cracking potential of fibre-reinforced mortar thin slabs was also assessed.
The use of shredded recycled PET fibres in concrete has been shown to lead to interesting improvements in performance for various fibre concrete characteristics and offers a potential alternative for this material
Education for sustainable construction
The COST Action C25 "Sustainability of Constructions - Integrated Approach to Life-time
Structural Engineering" is a network of scientists and researchers from 28 European countries
and the EU Joint Research Centre in Ispra. It was established to promote science-based developments
in sustainable construction in Europe through research on life-time structural engineering.
The COST Action has been active since 2006.COSTEuropean Science Foundatio
THE FIRE PERFORMANCE OF LIMESTONE Characterisation Strategy for the Fire Performance of Maltese & Hungarian Limestone
Abstract Limestone is exploited as dimensional building stones for construction. Fire and high temperatures cause significant changes in physical & mineralogical properties of limestone in buildings and historic monuments. A strategy to investigate limestone is developed with reference to different limestones in Malta and in Hungary. The changes in properties of the limestones are assessed with respect to different test conditions including homogenous heating and the standard fire curve. The startegy includes an assessment of the physical parameters (density, porosity, water absorption, UPV, uniaxial compressive strength and indirect tensile strength); petrographic analysis (polarising microscope, XRD, SEM); colour and durability anlysis. A preliminary investigation of specific properties of limestone exposed to high temperatures is presented
Investigating the potential for passive cooling of ventilated roof systems in Malta
This paper explores the potential for passive cooling by manipulating a traditionally monolithic flat roof structure in Malta. This is investigated by isolating the cast in situ structural concrete slab from the topping screed, typically laid to falls, and ventilating the space. A test rig was set up under laboratory conditions where thermal performance was tested for in summer and winter. Results suggest that there is no significant contribution in winter when vents are kept closed but in summer convective cooling reduces indoor surfaces temperatures, alleviating discomfort conditions in upper floors, thus reducing the demand for cooling.peer-reviewe
Experts versus the public : perceptions of siting wind turbines and performance concerns
Experiences of wind turbines (WT) shape public perception and acceptance of the tech- nology, influencing government policy, deployment, and land-use policies of wind turbines. This paper attempts to find changes in public perceptions over the last three decades and differences between experts and the public over different land-use options. A semi-structured questionnaire that integrates a visual survey of 10 images of WT technology in different urban, landscape and seascape settings was presented to both groups. The perceptions of siting, proximity, landscape type, and maturity of urban wind turbines’ technology in renewable energy generation were con- trasted. The results revealed that both the public and experts alike significantly preferred images of WT inclusion in seascape and landscape settings and responded negatively to images of WT as an addition to buildings in urban contexts. Images of wind turbines around transport settings were ranked in the second set of acceptances, after landscape settings, indicating that closer proximity to WT is acceptable, but for a short duration. The analysis also highlighted a preference by the public for aesthetically engaging WT, even if they resulted in lower energy yields, but were less accepted by the experts who based their judgment on technical performance.peer-reviewe
Possibilities of influencing the crystallization process of bisphenol a- and bisphenol f-based epoxy resins used for hydrophobic coatings on concrete
Crystallization of bisphenol A (DGEBA)- and bisphenol F (DGEBF)-based epoxy resins is a natural property of these oligomers. However, manufacturers of coatings and other systems based on these epoxy resins are making efforts to slow down the crystallization process as much as possible, thereby extending the shelf life and improving the competitiveness of their products. This paper focuses on the kinetics of the crystallization process of epoxy resins and the effect of the presence of a certain degree of crystallinity on selected parameters of epoxy-based materials. Furthermore, an analysis of the impact of a certain degree of crystallinity of the epoxy base on the resulting coating parameters was carried out. The highest value of crystallinity (17%) was achieved in the sample containing the highest proportion of DGEBF in the crystallization phase “c”, and the enthalpy of melting (Ht) of the crystalline DGEBF sample was 6.3 J/g. Mechanical parameters as well as chemical and thermal resistance of hydrophobic epoxy systems were investigated. The best abrasion resistance (1.5 cm3/50 cm2) was achieved with the blend containing only amorphous DGEBA. The adhesion of the epoxy samples on concrete was greater than 6.5 MPa. The chemical resistance tests performed showed that, in general, the chemical resistance of epoxy systems decreases with increasing crystallinity content. The tighter arrangement of molecules in the crystalline regions of the epoxy matrix results in an increase in density, strength and hardness. This study presents a comprehensive examination of the crystallization of DGEBA and DGEBF, which is, as yet virtually unavailable. It also contributes to knowledge by outlining the possibility of speeding up or slowing down the crystallization process of epoxy resins, including the principle of selecting nucleating agents.peer-reviewe
Strategies for waste recycling : the mechanical performance of concrete based on limestone and plastic waste
Recycling is among the best management strategies to avoid dispersion of several types of wastes in the environment. Research in recycling strategies is gaining increased importance in view of Circular Economy principles. The exploitation of waste, or byproducts, as alternative aggregate in concrete, results in a reduction in the exploitation of scarce natural resources. On the other hand, a productive use of waste leads to a reduction in the landfilling of waste material through the transformation of waste into a resource. In this frame of reference, the paper discusses how to use concrete as a container of waste focusing on the waste produced in limestone quarries and taking the challenge of introducing plastic waste into ordinary concrete mixes. To prove the possibility of reaching this objective with acceptable loss of performance, the mechanical characteristics of concrete mixed with additional alternative aggregates classified as waste are investigated and discussed in this paper through the presentation of two experimental campaigns. The first experimental investigation refers to concrete made with fine limestone waste used as a replacement for fine aggregate (sand), while the second experimental program refers to the inclusion of three types of plastic wastes in the concrete. Different mixes with different percentages of wastes are investigated to identify possible fields of application. The experimental results indicate that use of limestone quarry waste and use of plastic waste are possible within significant percentage ranges, having recognized a limited reduction of concrete strength that makes concrete itself appropriate for different practical applications.peer-reviewe
Reduced levels of ALS gene DCTN1 induce motor defects in Drosophila
Amyotrophic lateral sclerosis (ALS) is a rapidly progressive neuromuscular disease that has a strong genetic component. Deleterious variants in the DCTN1 gene are known to be a cause of ALS in diverse populations. DCTN1 encodes the p150 subunit of the molecular motor dynactin which is a key player in the bidirectional transport of cargos within cells. Whether DCTN1 mutations lead to the disease through either a gain or loss of function mechanism remains unresolved. Moreover, the contribution of non-neuronal cell types, especially muscle tissue, to ALS phenotypes in DCTN1 carriers is unknown. Here we show that gene silencing of Dctn1, the Drosophila main orthologue of DCTN1, either in neurons or muscles is sufficient to cause climbing and flight defects in adult flies. We also identify Dred, a protein with high homology to Drosophila Dctn1 and human DCTN1, that on loss of function also leads to motoric impairments. A global reduction of Dctn1 induced a significant reduction in the mobility of larvae and neuromuscular junction (NMJ) deficits prior to death at the pupal stage. RNA-seq and transcriptome profiling revealed splicing alterations in genes required for synapse organisation and function, which may explain the observed motor dysfunction and synaptic defects downstream of Dctn1 ablation. Our findings support the possibility that loss of DCTN1 function can lead to ALS and underscore an important requirement for DCTN1 in muscle in addition to neurons.peer-reviewe
- …