Thin spray rock liners with different concentrations of nanoclays

This study investigates the possibility of effectively replacing polymers in thin sprayed liners (TSL’s) with nanoclay particles. In the industry Nano particles are used in many different products to enhance their properties. The strength properties was analysed to see if the addition of nanoclays improve the strengths of the TSL product. Different concentrations of nanoclay were added to a standard TSL mixture in the place of polymer particles. The different composites were tested for Tensile Strength, Compression Strength, Shear Strength and Shear Bond Strength. Though there are other parameters to be tested, the study will only focus on those mentioned above, as they were considered to be the most important. The materials used for testing these characteristics were supplied by Oxyfibre. The mixtures have consisted of four different composites that included the standard mixture, 2% nanoclays, 4% nanoclays and 6% nanoclays

Immune interaction between SARS-CoV-2 and Mycobacterium tuberculosis

SARS-CoV-2 and Mycobacterium tuberculosis (Mtb) are major infectious causes of death, with meta-analyses and population-based studies finding increased mortality in co-infected patients simultaneously diagnosed with COVID-19 and tuberculosis (TB). There is a need to understand the immune interaction between SARS-CoV-2 and Mtb which impacts poor outcomes for those co-infected. We performed a PubMed and preprint search using keywords [SARS-CoV-2] AND [tuberculosis] AND [Immune response], including publications after January 2020, excluding reviews or opinions. Abstracts were evaluated by authors for inclusion of data specifically investigating the innate and/or acquired immune responses to SARS-CoV-2 and Mtb in humans and animal models, immunopathological responses in co-infection and both trials and investigations of potential protection against SARS-CoV-2 by Bacille Calmette Guérin (BCG). Of the 248 articles identified, 39 were included. Incidence of co-infection is discussed, considering in areas with a high burden of TB, where reported co-infection is likely underestimated. We evaluated evidence of the clinical association between COVID-19 and TB, discuss differences and similarities in immune responses in humans and in murine studies, and the implications of co-infection. SARS-CoV-2 and Mtb have both been shown to modulate immune responses, particularly of monocytes, macrophages, neutrophils, and T cells. Co-infection may result in impaired immunity to SARS-CoV-2, with an exacerbated inflammatory response, while T cell responses to Mtb may be modulated by SARS-CoV-2. Furthermore, there has been no proven potential COVID-19 clinical benefit of BCG despite numerous large-scale clinical trials

Saving on household electric water heating : what works best and by how much?

CITATION: Nel, P. J. C., Booysen, M. J. & Van Der Merwe, B. Saving on household electric water heating : what works best and by how much?. In IEEE Innovative Smart Grid Technologies - Asia (ISGT-Asia), 4-7 December 2017, Auckland, New Zealand, doi:10.1109/ISGT-Asia.2017.8378439.The original publication is available at https://ieeexplore.ieee.orgElectric heating of water for domestic use is a substantial component of total household energy costs. Thermal energy in a water heater is either used (as warm water) or lost to the environment. Various approaches to reduce the losses and improve the efficiency of these notoriously inefficient and costly water heaters have been proposed and are employed. However, given the complex factors at play, making sense of the savings approaches and choosing the right one for the right use case is not a simple task and often misunderstood. This paper addresses this problem by comparing some of the commonly employed approaches, including schedule control, change in set temperature, use of thermal insulation, and reduction in consumed volume. We also compare the impact of environmental factors, such as changing the ambient temperature around the water heater and the cold inlet temperature. The results show that for the consumption profiles and use cases evaluated, schedule control is the most effective, followed by insulation of the tank and piping. Combined, these two interventions save up to 25%. We also find that the effect of the temperature of the cold inlet water dwarfs that of the ambient temperature, is in line with other approaches, and means the installation status quo needs to be reconsidered.https://ieeexplore.ieee.org/document/8378439/Preprin

Health and economic impact of HIV/AIDS on South African households: a cohort study

BACKGROUND: South African households are severely affected by human immunodeficiency virus / acquired immunodeficiency syndrome (HIV/AIDS) but health and economic impacts have not been quantified in controlled cohort studies. METHODS: We compared households with an HIV-infected member, and unaffected neighbouring households, in one rural and one urban area in Free State province, South Africa. Interviews were conducted with one key informant in each household, at baseline and six months later. We studied 1913 members of 404 households, with 94% and 96% follow up, respectively. Household and individual level analyses were done. RESULTS: Members of affected households, compared to members of unaffected households, were independently more likely to be continuously ill (adjusted odds ratio (OR) 2.1, 95% CI 1.3–3.4 at follow up), and to die (adjusted OR 3.4, 95% CI 1.0–11), mainly due to infectious diseases. Government clinics and hospitals were the main sources of health care. Affected households were poorer than unaffected households at baseline (relative income per person 0.61, 95% CI 0.49–0.76). Over six months expenditure and income decreased more rapidly in affected than in unaffected households (baseline-adjusted relative expenditure 0.86, 95% CI 0.75–0.99 and income 0.89, 95% CI 0.75–1.05). Baseline morbidity was independently associated with lower income and expenditure at baseline but not with changes over six months. CONCLUSIONS: HIV/AIDS affects the health and wealth of households as well as infected individuals, aggravating pre-existing poverty

Additive Manufacturing of Devices Used for Collection and Application of Cereal Rust Urediniospores

Optimized inoculation procedures are an important consideration in achieving repeatable plant infection when working with biotrophic rust fungi. Several plant pathology laboratories specializing in rust research employ a system where the collection and application of fungal spores are accomplished using an exchangeable gelatin capsule. Urediniospores are collected from erumpent pustules on plant surfaces into a capsule fitted to a cyclone collector controlled by a vacuum pump. By adding light mineral oil to the same capsule, the spore suspension is then sprayed onto plants by means of a dedicated atomizer (inoculator) connected to an air pressure source. Although devices are not commercially available, modern day technologies provide an opportunity to efficiently design and manufacture collectors and inoculators. Using a process called Additive Manufacturing (AM), also known as “3D printing,” the bodies of a collector and inoculator were digitally designed and then laser-sintered in nylon. Depending on availability, copper or aluminum tubes were fitted to the bodies of both devices afterward to either facilitate directed collection of spores from rust pustules on plant surfaces or act as a siphon tube to deliver the spore suspension contained in the capsule. No statistical differences were found between AM and metal inoculators for spray delivery time or spore deposition per unit area. In replicated collection and inoculation tests of wheat seedlings with urediniospore bulks or single pustule collections of Puccinia triticina and P. graminis f. sp. tritici, the causal organisms of leaf rust and stem rust, consistent and satisfactory infection levels were achieved. Immersing used devices in acetone for 60 s followed by a 2 h heat treatment at 75°C produced no contaminant infection in follow-up tests

Additive Manufacturing of Devices Used for Collection and Application of Cereal Rust Urediniospores

Published ArticleOptimized inoculation procedures are an important consideration in achieving repeatable plant infection when working with biotrophic rust fungi. Several plant pathology laboratories specializing in rust research employ a system where the collection and application of fungal spores are accomplished using an exchangeable gelatin capsule. Urediniospores are collected from erumpent pustules on plant surfaces into a capsule fitted to a cyclone collector controlled by a vacuum pump. By adding light mineral oil to the same capsule, the spore suspension is then sprayed onto plants by means of a dedicated atomizer (inoculator) connected to an air pressure source. Although devices are not commercially available, modern day technologies provide an opportunity to efficiently design and manufacture collectors and inoculators. Using a process called Additive Manufacturing (AM), also known as “3D printing,” the bodies of a collector and inoculator were digitally designed and then laser-sintered in nylon. Depending on availability, copper or aluminum tubes were fitted to the bodies of both devices afterward to either facilitate directed collection of spores from rust pustules on plant surfaces or act as a siphon tube to deliver the spore suspension contained in the capsule. No statistical differences were found between AM and metal inoculators for spray delivery time or spore deposition per unit area. In replicated collection and inoculation tests of wheat seedlings with urediniospore bulks or single pustule collections of Puccinia triticina and P. graminis f. sp. tritici, the causal organisms of leaf rust and stem rust, consistent and satisfactory infection levels were achieved. Immersing used devices in acetone for 60 s followed by a 2 h heat treatment at 75 C produced no contaminant infection in follow-up tests

Boekbespreking

No abstract available

Who is accessing public-sector anti-retroviral treatment in the Free State, South Africa? An exploratory study of the first three years of programme implementation

<p>Abstract</p> <p>Background</p> <p>Although South Africa has the largest public-sector anti-retroviral treatment (ART) programme in the world, anti-retroviral coverage in adults was only 40.2% in 2008. However, longitudinal studies of who is accessing the South African public-sector ART programme are scarce. This study therefore had one main research question: who is accessing public-sector ART in the Free State Province, South Africa? The study aimed to extend the current literature by investigating, in a quantitative manner and using a longitudinal study design, the participants enrolled in the public-sector ART programme in the period 2004-2006 in the Free State Province of South Africa.</p> <p>Methods</p> <p>Differences in the demographic (age, sex, population group and marital status) socio-economic (education, income, neo-material indicators), geographic (travel costs, relocation for ART), and medical characteristics (CD4, viral load, time since first diagnosis, treatment status) among 912 patients enrolled in the Free State public-sector ART programme between 2004 and 2006 were assessed with one-way analysis of variance, Bonferroni post-hoc analysis, and cross tabulations with the chi square test.</p> <p>Results</p> <p>The patients accessing treatment tended to be female (71.1%) and unemployed (83.4%). However, although relatively poor, those most likely to access ART services were not the most impoverished patients. The proportion of female patients increased (<it>P </it>< 0.05) and their socio-economic situation improved between 2004 and 2006 (<it>P </it>< 0.05). The increasing mean transport cost (<it>P </it>< 0.05) to visit the facility is worrying, because this cost is an important barrier to ART uptake and adherence. Encouragingly, the study results revealed that the interval between the first HIV-positive diagnosis and ART initiation decreased steadily over time (<it>P </it>< 0.05). This was also reflected in the increasing baseline CD4 cell count at ART initiation (<it>P </it>< 0.05).</p> <p>Conclusions</p> <p>Our analysis showed significant changes in the demographic, socio-economic, geographic, and medical characteristics of the patients during the first three years of the programme. Knowledge of the characteristics of these patients can assist policy makers in developing measures to retain them in care. The information reported here can also be usefully applied to target patient groups that are currently not reached in the implementation of the ART programme.</p

Air transport liberalisation and airport dependency: developing a composite index

Air transport liberalisation in Europe has produced some major changes to the networks operated by airlines and the services available at airports. Within this context the degree of airport dependency in terms of market, spatial and temporal concentration is important to know from an economic geography and risk management perspective. A composite index called the Airport Dependency Index (ADI) is developed to measure airport dependency based on the concept of the relative Gini coefficient. Liberalisation has had varying impacts depending on the size and type of airport and so a comparison is made of the degree of dependency at a large sample of European airports using the ADI. The ADI has the potential to provide insight on the sustainability and worthiness of financing airport projects, and on whether airports should diversify further their activities by investing in the growth and expansion of their network