Architecture, Voltage and Components for a Turboelectric Distributed Propulsion Electric Grid

The development of a wholly superconducting turboelectric distributed propulsion system presents hide unique opportunities for the aerospace industry. However, this transition from normally conducting systems to superconducting systems significantly increases the equipment complexity necessary to manage the electrical power systems. Due to the low technology readiness level (TRL) nature of all components and systems, current Turboelectric Distributed Propulsion (TeDP) technology developments are driven by an ambiguous set of system-level electrical integration standards for an airborne microgrid system (Figure 1). While multiple decades' worth of advancements are still required for concept realization, current system-level studies are necessary to focus the technology development, target specific technological shortcomings, and enable accurate prediction of concept feasibility and viability. An understanding of the performance sensitivity to operating voltages and an early definition of advantageous voltage regulation standards for unconventional airborne microgrids will allow for more accurate targeting of technology development. Propulsive power-rated microgrid systems necessitate the introduction of new aircraft distribution system voltage standards. All protection, distribution, control, power conversion, generation, and cryocooling equipment are affected by voltage regulation standards. Information on the desired operating voltage and voltage regulation is required to determine nominal and maximum currents for sizing distribution and fault isolation equipment, developing machine topologies and machine controls, and the physical attributes of all component shielding and insulation. Voltage impacts many components and system performance

Comparison of candidate architectures for future distributed propulsion aircraft

Turbine engine driven distributed electrical aircraft power systems (also referred to as Turboelectric Distributed Propulsion (TeDP)) are proposed for providing thrust for future aircraft with superconducting components operating at 77K in order for performance and emissions targets to be met. The proposal of such systems presents a radical change from current state-of-the-art aero-electrical power systems. Central to the development of such power systems are architecture design trades which must consider system functionality and performance, system robustness and fault ride-through capability, in addition to the balance between mass and efficiency. This paper presents a quantitative comparison of the three potential candidate architectures for TeDP electrical networks. This analysis provides the foundations for establishing the feasibility of these different architectures subject to design and operational constraints. The findings of this paper conclude that a purely AC synchronous network performs best in terms of mass and efficiency, but similar levels of functionality and controllability to an architecture with electrical decoupling via DC cannot readily be achieved. If power electronic converters with cryocoolers are found to be necessary for functionality and controllability purposes, then studies show that a significant increase in the efficiency of solid state switching components is necessary to achieve specified aircraft performance targets

Development of voltage standards for turbo-electric distributed propulsion aircraft power systems

Distributed propulsion is being considered as a possible solution to increase aircraft efficiency, reduce fuel costs and reduce emissions. The size, weight and efficiency of components within a Turbo-electric Distributed Propulsion (TeDP) system are dependent on the voltage level of the electrical power network. Current aircraft voltage standards do not address the architecture of distributed propulsion and so a review of voltage standards from different industries is conducted with areas of commonality addressed. An example of TeDP architecture is presented and analyzed to highlight how current aircraft standards may not apply to TeDP. A summary of challenges in developing standards for a TeDP is compiled with a stakeholder analysis to demonstrate the wide range of industries and personnel with vested interests in the development of voltage standards and recommended practices for TeDP

Architecture, Voltage, and Components for a Turboelectric Distributed Propulsion Electric Grid

The development of a wholly superconducting turboelectric distributed propulsion system presents unique opportunities for the aerospace industry. However, this transition from normally conducting systems to superconducting systems significantly increases the equipment complexity necessary to manage the electrical power systems. Due to the low technology readiness level (TRL) nature of all components and systems, current Turboelectric Distributed Propulsion (TeDP) technology developments are driven by an ambiguous set of system-level electrical integration standards for an airborne microgrid system (Figure 1). While multiple decades' worth of advancements are still required for concept realization, current system-level studies are necessary to focus the technology development, target specific technological shortcomings, and enable accurate prediction of concept feasibility and viability. An understanding of the performance sensitivity to operating voltages and an early definition of advantageous voltage regulation standards for unconventional airborne microgrids will allow for more accurate targeting of technology development. Propulsive power-rated microgrid systems necessitate the introduction of new aircraft distribution system voltage standards. All protection, distribution, control, power conversion, generation, and cryocooling equipment are affected by voltage regulation standards. Information on the desired operating voltage and voltage regulation is required to determine nominal and maximum currents for sizing distribution and fault isolation equipment, developing machine topologies and machine controls, and the physical attributes of all component shielding and insulation. Voltage impacts many components and system performance

An experimental study of frequency droop control in a low-inertia microgrid

The use of distributed generation in microgrid systems is becoming a popular way to provide a reliable source of electricity to critical loads. Efforts in disaster relief operations and national defense applications require a mobile, scalable power grid that is easily constructed and robust enough to handle radical system changes. These microgrids are usually built using low-inertia generators that are portable and can easily adapt to a rapidly changing environment. Despite the benefits of low-inertia generation, the drawback is that large load steps can cause a system to become unstable, losing synchronism and damaging both generators and loads. A control system is necessary to bring stability while providing efficient and robust electricity to the microgrid. A droop control scheme uses only local power to detect changes in the system and adjust the operating points of the generators accordingly. The droop control uses the real power out of a generator to calculate the ideal operating frequency. This relaxing of a stiff frequency allows the microgrid to dampen the fast effects of changing loads, increasing the stability of the system. Droop control is reviewed and simulations will be used to determine the effectiveness of the droop controller as well as alternative forms of the traditional droop control. Experimental results are presented detailing how the droop gain affects power distribution and system stability

Effects of voltage regulation on component size and efficiency during failure and recovery modes of a TeDP microgrid system

Different fault scenarios and how the operational voltage envelope will determine system recovery are explored. The paper will also look at how the size and efficiency of a component in the system is impacted with varying fault parameters