Various methods of manufacturing superconducting accelerating cavities

We report on experience in superconducting cavity production methods gained in shaping, joining and thin film coating with various materials and techniques (Pb, Nb, Nb$_{3}$Sn, NbN, NbTiN) with emphasis on their potential to reduce mass production costs

Metallurgical analysis and RF losses in superconducting niobium thin film cavities

Copper cavities with a thin niobium film as used in the large electron positron collider LEP would be also attractive for future linear colliders, provided the decrease of the Q-value with the accelerating gradient can be reduced. We aim at extracting the important parameters that govern this decrease. The dependence on the RF frequency is studied by exciting 500 MHz and 1500 MHz cavities in different modes. In addition we combined RF measurements for two 1500 MHz cavities of different RF performance with microscopic tests (AFM, TEM) on samples cut out of the same cavities. Their micro-structural characterisation in plan-view allows to extract the grain size and the defect densities

Power-to-heat for renewable energy integration: A review of technologies, modeling approaches, and flexibility potentials

A flexible coupling of power and heat sectors can contribute to both renewable energy integration and decarbonization. We present a literature review of model-based analyses in this field, focusing on residential heating. We compare geographical and temporal research scopes and identify state-of-the-art analytical model formulations, particularly considering heat pumps and thermal storage. While numerical findings are idiosyncratic to specific assumptions, a synthesis of results indicates that power-to-heat technologies can cost-effectively contribute to fossil fuel substitution, renewable integration, and decarbonization. Heat pumps and passive thermal storage emerge as particularly favorable options.EC/H2020/646116/EU/Realising Value from Electricity Markets with Local Smart Electric Thermal Storage Technology/RealValu

Secondary Beam Monitors for the NuMI Facility at FNAL

The Neutrinos at the Main Injector (NuMI) facility is a conventional neutrino beam which produces muon neutrinos by focusing a beam of mesons into a long evacuated decay volume. We have built four arrays of ionization chambers to monitor the position and intensity of the hadron and muon beams associated with neutrino production at locations downstream of the decay volume. This article describes the chambers' construction, calibration, and commissioning in the beam.Comment: Accepted for publication in Nucl. Instr. Meth.

Activation of recombinantly expressed l-Amino Acid Oxidase from Rhizoctonia solani by Sodium Dodecyl Sulfate

Hahn K, Hertle Y, Bloess S, Kottke T, Hellweg T, Fischer von Mollard G. Activation of recombinantly expressed l-Amino Acid Oxidase from Rhizoctonia solani by Sodium Dodecyl Sulfate. Molecules. 2017;22(12): 2272.l-Amino acid oxidases (l-AAO) catalyze the oxidative deamination of l-amino acids to the corresponding α-keto acids. The non-covalently bound cofactor FAD is reoxidized by oxygen under formation of hydrogen peroxide. We expressed an active l-AAO from the fungus Rhizoctonia solani as a fusion protein in E. coli. Treatment with small amounts of the detergent sodium dodecyl sulfate (SDS) stimulated the activity of the enzyme strongly. Here, we investigated whether other detergents and amphiphilic molecules activate 9His-rsLAAO1. We found that 9His-rsLAAO1 was also activated by sodium tetradecyl sulfate. Other detergents and fatty acids were not effective. Moreover, effects of SDS on the oligomerization state and the protein structure were analyzed. Native and SDS-activated 9His-rsLAAO1 behaved as dimers by size-exclusion chromatography. SDS treatment induced an increase in hydrodynamic radius as observed by size-exclusion chromatography and dynamic light scattering. The activated enzyme showed accelerated thermal inactivation and an exposure of additional protease sites. Changes in tryptophan fluorescence point to a more hydrophilic environment. Moreover, FAD fluorescence increased and a lower concentration of sulfites was sufficient to form adducts with FAD. Taken together, these data point towards a more open conformation of SDS-activated l-amino acid oxidase facilitating access to the active site

The Superconducting TESLA Cavities

The conceptional design of the proposed linear electron-positron collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities with an accelerating gradient of Eacc >= 25 MV/m at a quality factor Q0 > 5E+9. The design goal for the cavities of the TESLA Test Facility (TTF) linac was set to the more moderate value of Eacc >= 15 MV/m. In a first series of 27 industrially produced TTF cavities the average gradient at Q0 = 5E+9 was measured to be 20.1 +- 6.2 MV/m, excluding a few cavities suffering from serious fabrication or material defects. In the second production of 24 TTF cavities additional quality control measures were introduced, in particular an eddy-current scan to eliminate niobium sheets with foreign material inclusions and stringent prescriptions for carrying out the electron-beam welds. The average gradient of these cavities at Q0 = 5E+9 amounts to 25.0 +- 3.2 MV/m with the exception of one cavity suffering from a weld defect. Hence only a moderate improvement in production and preparation techniques will be needed to meet the ambitious TESLA goal with an adequate safety margin. In this paper we present a detailed description of the design, fabrication and preparation of the TESLA Test Facility cavities and their associated components and report on cavity performance in test cryostats and with electron beam in the TTF linac. The ongoing R&D towards higher gradients is briefly addressed.Comment: 45 pages (Latex), 39 figures (Encapsulated Postscript), 53 Author