Alkaline earth complexes of a sterically demanding guanidinate ligand

The synthesis of the guanidine MesN{C(NCy2)}N(H)Mes (LH; Mes = 2,4,6-Me3C6H2, Cy = cyclohexyl), and its use as a proligand for the synthesis of alkaline earth metal complexes are reported. Described herein are (i) an unusual Hauser base cubane, (ii) a homoleptic and a base-stabilized magnesium complex featuring the same guanidinate ligands, and (iii) the comparison of a series of alkaline earth (Mg, Ca, Sr, Ba) bis(guanidinate) complexes, which allows the opportunity to compare the changing trends in bonding as the Group is descended. The reaction between LH and MeMgI(OEt2)2 yields the Hauser base as a mixture of the tetramer [Mg4L4(μ3-I)4] (1a) and dimer [Mg2L2(μ-I)2(OEt2)2] (1b), and the reaction with two equivalents of MgnBu2 leads to the formation of four-coordinate [MgL2] (2), which features a square-planar geometry for the magnesium cation, or five-coordinate [MgL2(THF)] (3), depending on the solvent used. 1a is the first crystallographically-characterized cubane structure to consist of four LAeX (L = ligand, X = halide) units. The complexes [AeL2(THF)2] (Ae = Ca, 4; Ae = Sr, 5) and [BaL2] (6) were synthesized via redox transmetallation/ligand exchange reactions. Complex 6 is the first example of a homoleptic, monomeric barium complex of the NCN ligand family, with the structure stabilized by a number of barium-arene interactions in the solid state

Bis(1-carbamimidoyl-2-ethyl­isourea)copper(II) bis­(perchlorate)

The title complex, [Cu(C4H10N4O)2](ClO4)2 or [Cu(L 1e)2](ClO4)2, where L 1e is 1-carbamimidoyl-2-ethyl­isourea, was obtained from the ethano­lysis reaction of 2-cyano­guanidine and copper(II) perchlorate hexa­hydrate in a 2:1 molar ratio. The two bidentate L 1e ligands are coordinated to the CuII center through N-donor atoms, leading to the CuN4 chromophore. The CuII environment is slightly distorted square-planar, with a dihedral angle of 5.17 (6)° between the two six-membered chelate rings. One of the ClO4 − anions is disordered over two positions in a 0.6:0.4 ratio

Tuning coordination in s-block carbazol-9-yl complexes

1,3,6,8-Tetra-tert-butylcarbazol-9-yl and 1,8-diaryl-3,6-di(tert-butyl)carbazol-9-yl ligands have been utilized in the synthesis of potassium and magnesium complexes. The potassium complexes (1,3,6,8-tBu4carb)K(THF)4 (1; carb=C12H4N), [(1,8-Xyl2-3,6-tBu2carb)K(THF)]2 (2; Xyl=3,5-Me2C6H3) and (1,8-Mes2-3,6-tBu2carb)K(THF)2 (3; Mes=2,4,6-Me3C6H2) were reacted with MgI2 to give the Hauser bases 1,3,6,8-tBu4carbMgI(THF)2 (4) and 1,8-Ar2-3,6-tBu2carbMgI(THF) (Ar=Xyl 5, Ar=Mes 6). Structural investigations of the potassium and magnesium derivatives highlight significant differences in the coordination motifs, which depend on the nature of the 1- and 8-substituents: 1,8-di(tert-butyl)-substituted ligands gave π-type compounds (1 and 4), in which the carbazolyl ligand acts as a multi-hapto donor, with the metal cations positioned below the coordination plane in a half-sandwich conformation, whereas the use of 1,8-diaryl substituted ligands gave σ-type complexes (2 and 6). Space-filling diagrams and percent buried volume calculations indicated that aryl-substituted carbazolyl ligands offer a steric cleft better suited to stabilization of low-coordinate magnesium complexes

Piperazine-based N4-type 16-membered macroheterocycles and their nickel(II) complexes

Square-planar diamagnetic nickel(II) complexes 5a and 5b containing 16-membered diamino-diimino ligands were prepared from the corresponding open-chain complexes 2a and 2b via condensation with o-phthalic dialdehyde in methanol. The solid-state structure of the starting complex 2b revealed the cisoid conformation of aryl groups compared to the transoid one found in the case of 2a. At the same time, the cisoid conformation is not retained in acetone solution: rather, the tert-Bu-substituted complex 2b was fully transformed into the trans form whereas its analogue 2aexhibits both cis and transforms in acetone solution. The cisoid conformation was also observed for the cyclic structures 5a and 5b by X-ray analysis and VT NMR experiments. The borohydride reduction of 5a with subsequent cyanide-assisted removal of nickel led to a new 16-membered tetraazamacrocycle 6. Its X-ray structure showed a cisoid conformation supported by two intramolecular hydrogen bonds that was also sustained in solution. VT NMR experiments revealed the degenerative interconvertion of a macrocycle with activation energy ca. 41.9±0.8 kJ/mol

A monomeric, heterobimetallic complex with an unsupported Mg−Fe bond

The phosphinimine, trimethylsilyl-substituted BIPM ligand [BIPM = bis(iminophosphorano)methanide] has been used to stabilise CH(Ph2PNSiMe3)2MgFe(η5-C5H5)(CO)2 (1), which is a structurally authenticated complex exhibiting a direct, unsupported bond between an alkaline earth metal and a transition metal. The FTIR-measured carbonyl stretching frequencies for this complex suggest that there is a polarisation of charge from the transition metal fragment to the magnesium centre. The presence of a polar metal-metal bond in 1 is confirmed by DFT calculations, which suggest that the Mg−Fe bond is predominantly ionic in nature

Synthesis and Characterisation of Lanthanide N-Trimethylsilyl and -Mesityl Functionalised Bis(iminophosphorano)methanides and -Methanediides

We report the extension of the series of {BIPMTMSH}− (BIPMR = C{PPh2NR}2, TMS = trimethylsilyl) derived rare earth methanides by the preparation of [Ln(BIPMTMSH)(I)2(THF)] (Ln = Nd, Gd, Tb), 1a–c, in 34–50% crystalline yields via the reaction of [Ln(I)3(THF)3.5] with [Cs(BIPMTMSH)]. Similarly, we have extended the range of {BIPMMesH}− (Mes = 2,4,6-trimethylphenyl) derived rare earth methanides with the preparation of [Gd(BIPMMesH)(I)2(THF)2], 3, (49%) and [Yb(BIPMMesH)(I)2(THF)], 4, (26%), via the reaction of [Ln(I)3(THF)3.5] with [{K(BIPMMesH)}2]. Attempts to prepare dysprosium and erbium analogues of 3 or 4 were not successful, with the ion pair species [Ln(BIPMMesH)2][BIPMMesH] (Ln  = Dy, Er), 5a–b, isolated in 31–39% yield. The TMEDA (N',N',N",N"-tetramethylethylenediamine) adducts [Ln(BIPMMesH)(I)2(TMEDA)] (Ln = La, Gd), 6a–b, were prepared in quantitative yield via the dissolution of [La(BIPMMesH)(I)2(THF)] or 3 in a TMEDA/THF solution. The reactions of [Ln(BIPMMesH)(I)2(THF)] [Ln  = La, Ce, Pr, and Gd (3)] or 6a–b with a selection of bases did not afford [La(BIPMMes)(I)(S)n] (S = solvent) as predicted, but instead led to the isolation of the heteroleptic complexes [Ln(BIPMMes)(BIPMMesH)] (Ln = La, Ce, Pr and Gd), 7a–d, in low yields due to ligand scrambling

Structural aspects of MOF-based energy materials research at Diamond

Large-scale central facilities such as Diamond Light Source fulfil an increasingly pivotal role in many large-scale scientific research programmes. We illustrate these developments by reference to energy-centred projects at the University of Nottingham, the progress of which depends crucially on access to these facilities. Continuing access to beamtime has now become a major priority for those who direct such programme

Understanding the power requirements of autonomous underwater systems, Part I: An analytical model for optimum swimming speeds and cost of transport

Many marine species exhibit capabilities that would be desirable for manmade systems operating in the maritime environment. However, without detracting from the potential, if bioinspiration is to prove beneficial, it is important to have a consistent set of metrics that allow fair comparison, without bias, when comparing the performance of engineered and biological systems. In this study we focus on deriving an unbiased metric of performance applicable to marine animals and engineered subsea vehicles for one of the most fundamental of properties; that of the energy cost of locomotion. We present a rational analytical model of the physics behind the total energy cost of locomotion applicable to both biological and engineered autonomous underwater marine systems. This model proposes the use of an equivalent spheroid efficiency as a fair metric to compare engineered and biological systems. The model is then utilised to identify how changes in mass, speed, spheroid efficiency and hotel load impact the performance of the system

Coordination chemistry of nitrile-functionalized mixed thia-aza macrocycles [9]aneN2S and [9]aneNS2 towards silver(I)

The coordination chemistry towards silver(I) of the small-ring macrocycles [9]aneN2S (1-thia-4,7-di¬aza-cyclo¬nona¬ne) and [9]aneNS2 (1,4-di¬thia-7-aza¬cyclo¬nona¬ne) incorporating nitrile-functionalized pendant arms is considered both in the presence and the absence of exogenous bridging ligands. The aim is to understand the influence of the number and length of the pendant arms on the nuclearity and dimensionality of the resulting com¬plexes. The X-ray crystal structures of the com¬plexes bis¬[4,7-bis-(cyano¬meth¬yl)-1-thia-4,7-di¬aza¬cyclo¬non¬ane-κ3N,N′,S]silver(I) tetra¬fluorido¬borate, [Ag(C10H16N4S)2]BF4 or [Ag(L1)2]BF4, [4,7-bis¬(2-cyano¬eth¬yl)-1-thia-4,7-di¬aza¬cyclo¬nonane-κ3N,N′,S](thio¬cyanato-κS)silver(I), [Ag(C12H20N4S)(NCS)] or [Ag(L2)(SCN)], and μ-thio¬cyanato-κ2S:S-bis¬{[7-(2-cyano¬eth¬yl)-1,4-di¬thia-7-aza-cyclo¬nonane-κ3N,S,S′]silver(I)} tetra¬fluor¬ido¬borate, [Ag2(C9H16N2S2)2(SCN)]BF4 or [Ag2(L3)2(μ-SCN)]BF4, are discus¬sed in relation to analogous com¬pounds in the literature