Experimental investigation of outdoor propagation of finite-amplitude noise

The outdoor propagation of finite amplitude acoustic waves was investigated using a conventional electroacoustic transmitter which was mounted on the ground and pointed upward in order to avoid ground reflection effects. The propagation path was parallel to a radio tower 85 m tall, whose elevator carried the receiving microphone. The observations and conclusions are as follows: (1) At the higher source levels nonlinear propagation distortion caused a strong generation of high frequency noise over the propagation path. For example, at 70 m for a frequency 2-3 octaves above the source noise band, the measured noise was up to 30 dB higher than the linear theory prediction. (2) The generation occurred in both the nearfield and the farfield of the transmitter. (3) At no measurement point was small-signal behavior established for the high requency noise. Calculations support the contention that the nonlinearity generated high frequency noise never becomes small-signal in its behavior, regardless of distance. (4) When measured spectra are scaled in frequency and level to make them comparable with spectra of actual jet noise, they are found to be well within the jet noise range. It is therefore entirely possible that nonlinear distortion affects jet noise

Early History Of ISNA

The International Symposia on Nonlinear Acoustics, now referred to as ISNA, have convened regularly since 1968, bringing together scientists and engineers to report and discuss the latest developments in this branch of nonlinear physics. The fact that this series of symposia is still going strong after more than four decades is testimony that nonlinear acoustics has established itself as a distinct, important, and vibrant field of research. In this paper we take a look back at the early years of ISNA to recall how it all began and trace the evolution of the symposia into their current form.Applied Research Laboratorie

An Audible Demonstration Of The Speed Of Sound In Bubbly Liquids

The speed of sound in a bubbly liquid is strongly dependent upon the volume fraction of the gas phase, the bubble size distribution, and the frequency of the acoustic excitation. At sufficiently low frequencies, the speed of sound depends primarily on the gas volume fraction. This effect can be audibly demonstrated using a one-dimensional acoustic waveguide, in which the flow rate of air bubbles injected into a water-filled tube is varied by the user. The normal modes of the waveguide are excited by the sound of the bubbles being injected into the tube. As the flow rate is varied, the speed of sound varies as well, and hence, the resonance frequencies shift. This can be clearly heard through the use of an amplified hydrophone and the user can create aesthetically pleasing and even musical sounds. In addition, the apparatus can be used to verify a simple mathematical model known as Wood's equation that relates the speed of sound of a bubbly liquid to its void fraction. (c) 2008 American Association of Physics Teachers.Mechanical Engineerin

Holograms to Focus Arbitrary Ultrasonic Fields through the Skull

[EN] We report 3D-printed acoustic holographic lenses for the formation of ultrasonic fields of complex spatial distribution inside the skull. Using holographic lenses, we experimentally, numerically and theoretically produce acoustic beams whose spatial distribution matches target structures of the central nervous system. In particular, we produce three types of targets of increasing complexity. First, a set of points are selected at the center of both right and left human hippocampi. Experiments using a skull phantom and 3D printed acoustic holographic lenses show that the corresponding bi-focal lens simultaneously focuses acoustic energy at the target foci, with good agreement between theory and simulations. Second, an arbitrary curve is set as the target inside the skull phantom. Using time-reversal methods the holographic beam bends following the target path, in a similar way as self-bending beams do in free space. Finally, the right human hippocampus is selected as a target volume. The focus of the corresponding holographic lens overlaps with the target volume in excellent agreement between theory in free-media, and experiments and simulations including the skull phantom. The precise control of focused ultrasound into the central nervous system is mainly limited due to the strong phase aberrations produced by refraction and attenuation of the skull. Using the present method, the ultrasonic beam can be focused not only at a single point but overlapping one or various target structures simultaneously using low-cost 3D-printed acoustic holographic lens. The results open new paths to spread incoming biomedical ultrasound applications including blood-brain barrier opening and neuromodulation.This work is supported by the Spanish Ministry of Economy and Innovation (MINECO) through Project No. TEC2016-80976-R. N.J. and S.J. acknowledge financial support from Generalitat Valenciana through Grants No. APOSTD/2017/042, No. ACIF/2017/045, and No. GV/2018/11. F.C. acknowledges financial support from Agencia Valenciana de la Innovacio through Grant No. INNCON00/18/9 and European Regional Development Fund (Grant No. IDIFEDER/2018/022).Jiménez-Gambín, S.; Jimenez, N.; Benlloch Baviera, JM.; Camarena Femenia, F. (2019). Holograms to Focus Arbitrary Ultrasonic Fields through the Skull. Physical Review Applied. 12(1):014016-1-014016-14. https://doi.org/10.1103/PhysRevApplied.12.014016S014016-1014016-14121GABOR, D. (1948). A New Microscopic Principle. Nature, 161(4098), 777-778. doi:10.1038/161777a0Microscopy by reconstructed wave-fronts. (1949). Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 197(1051), 454-487. doi:10.1098/rspa.1949.0075Leith, E. N., & Upatnieks, J. (1962). Reconstructed Wavefronts and Communication Theory*. Journal of the Optical Society of America, 52(10), 1123. doi:10.1364/josa.52.001123Ni, X., Kildishev, A. V., & Shalaev, V. M. (2013). Metasurface holograms for visible light. Nature Communications, 4(1). doi:10.1038/ncomms3807Huang, L., Chen, X., Mühlenbernd, H., Zhang, H., Chen, S., Bai, B., … Zhang, S. (2013). Three-dimensional optical holography using a plasmonic metasurface. Nature Communications, 4(1). doi:10.1038/ncomms3808Ma, G., & Sheng, P. (2016). Acoustic metamaterials: From local resonances to broad horizons. Science Advances, 2(2), e1501595. doi:10.1126/sciadv.1501595Cummer, S. A., Christensen, J., & Alù, A. (2016). Controlling sound with acoustic metamaterials. Nature Reviews Materials, 1(3). doi:10.1038/natrevmats.2016.1Liu, Z. (2000). Locally Resonant Sonic Materials. Science, 289(5485), 1734-1736. doi:10.1126/science.289.5485.1734Fang, N., Xi, D., Xu, J., Ambati, M., Srituravanich, W., Sun, C., & Zhang, X. (2006). Ultrasonic metamaterials with negative modulus. Nature Materials, 5(6), 452-456. doi:10.1038/nmat1644Yang, M., Ma, G., Yang, Z., & Sheng, P. (2013). Coupled Membranes with Doubly Negative Mass Density and Bulk Modulus. Physical Review Letters, 110(13). doi:10.1103/physrevlett.110.134301Li, Y., Liang, B., Gu, Z., Zou, X., & Cheng, J. (2013). Reflected wavefront manipulation based on ultrathin planar acoustic metasurfaces. Scientific Reports, 3(1). doi:10.1038/srep02546Xie, Y., Wang, W., Chen, H., Konneker, A., Popa, B.-I., & Cummer, S. A. (2014). Wavefront modulation and subwavelength diffractive acoustics with an acoustic metasurface. Nature Communications, 5(1). doi:10.1038/ncomms6553Jiménez, N., Cox, T. J., Romero-García, V., & Groby, J.-P. (2017). Metadiffusers: Deep-subwavelength sound diffusers. Scientific Reports, 7(1). doi:10.1038/s41598-017-05710-5Jiménez, N., Romero-García, V., Pagneux, V., & Groby, J.-P. (2017). Rainbow-trapping absorbers: Broadband, perfect and asymmetric sound absorption by subwavelength panels for transmission problems. Scientific Reports, 7(1). doi:10.1038/s41598-017-13706-4Qi, S., Li, Y., & Assouar, B. (2017). Acoustic Focusing and Energy Confinement Based on Multilateral Metasurfaces. Physical Review Applied, 7(5). doi:10.1103/physrevapplied.7.054006Bok, E., Park, J. J., Choi, H., Han, C. K., Wright, O. B., & Lee, S. H. (2018). Metasurface for Water-to-Air Sound Transmission. Physical Review Letters, 120(4). doi:10.1103/physrevlett.120.044302Li, Y., Jiang, X., Liang, B., Cheng, J., & Zhang, L. (2015). Metascreen-Based Acoustic Passive Phased Array. Physical Review Applied, 4(2). doi:10.1103/physrevapplied.4.024003Li, Y., & Assouar, M. B. (2015). Three-dimensional collimated self-accelerating beam through acoustic metascreen. Scientific Reports, 5(1). doi:10.1038/srep17612Kaina, N., Lemoult, F., Fink, M., & Lerosey, G. (2015). Negative refractive index and acoustic superlens from multiple scattering in single negative metamaterials. Nature, 525(7567), 77-81. doi:10.1038/nature14678Li, J., Fok, L., Yin, X., Bartal, G., & Zhang, X. (2009). Experimental demonstration of an acoustic magnifying hyperlens. Nature Materials, 8(12), 931-934. doi:10.1038/nmat2561Melde, K., Mark, A. G., Qiu, T., & Fischer, P. (2016). Holograms for acoustics. Nature, 537(7621), 518-522. doi:10.1038/nature19755Xie, Y., Shen, C., Wang, W., Li, J., Suo, D., Popa, B.-I., … Cummer, S. A. (2016). Acoustic Holographic Rendering with Two-dimensional Metamaterial-based Passive Phased Array. Scientific Reports, 6(1). doi:10.1038/srep35437Zhu, Y., Hu, J., Fan, X., Yang, J., Liang, B., Zhu, X., & Cheng, J. (2018). Fine manipulation of sound via lossy metamaterials with independent and arbitrary reflection amplitude and phase. Nature Communications, 9(1). doi:10.1038/s41467-018-04103-0Memoli, G., Caleap, M., Asakawa, M., Sahoo, D. R., Drinkwater, B. W., & Subramanian, S. (2017). Metamaterial bricks and quantization of meta-surfaces. Nature Communications, 8(1). doi:10.1038/ncomms14608Brown, M. D., Cox, B. T., & Treeby, B. E. (2017). Design of multi-frequency acoustic kinoforms. Applied Physics Letters, 111(24), 244101. doi:10.1063/1.5004040Hertzberg, Y., & Navon, G. (2011). Bypassing absorbing objects in focused ultrasound using computer generated holographic technique. Medical Physics, 38(12), 6407-6415. doi:10.1118/1.3651464Zhang, P., Li, T., Zhu, J., Zhu, X., Yang, S., Wang, Y., … Zhang, X. (2014). Generation of acoustic self-bending and bottle beams by phase engineering. Nature Communications, 5(1). doi:10.1038/ncomms5316Marzo, A., Seah, S. A., Drinkwater, B. W., Sahoo, D. R., Long, B., & Subramanian, S. (2015). Holographic acoustic elements for manipulation of levitated objects. Nature Communications, 6(1). doi:10.1038/ncomms9661Ter Haar, >Gail, & Coussios, C. (2007). High intensity focused ultrasound: Physical principles and devices. International Journal of Hyperthermia, 23(2), 89-104. doi:10.1080/02656730601186138Gélat, P., ter Haar, G., & Saffari, N. (2014). A comparison of methods for focusing the field of a HIFU array transducer through human ribs. Physics in Medicine and Biology, 59(12), 3139-3171. doi:10.1088/0031-9155/59/12/3139Fry, F. J., & Barger, J. E. (1978). Acoustical properties of the human skull. The Journal of the Acoustical Society of America, 63(5), 1576-1590. doi:10.1121/1.381852Thomas, J.-L., & Fink, M. A. (1996). Ultrasonic beam focusing through tissue inhomogeneities with a time reversal mirror: application to transskull therapy. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 43(6), 1122-1129. doi:10.1109/58.542055Hynynen, K., & Jolesz, F. A. (1998). Demonstration of Potential Noninvasive Ultrasound Brain Therapy Through an Intact Skull. Ultrasound in Medicine & Biology, 24(2), 275-283. doi:10.1016/s0301-5629(97)00269-xSun, J., & Hynynen, K. (1998). Focusing of therapeutic ultrasound through a human skull: A numerical study. The Journal of the Acoustical Society of America, 104(3), 1705-1715. doi:10.1121/1.424383Aubry, J.-F., Tanter, M., Pernot, M., Thomas, J.-L., & Fink, M. (2003). Experimental demonstration of noninvasive transskull adaptive focusing based on prior computed tomography scans. The Journal of the Acoustical Society of America, 113(1), 84-93. doi:10.1121/1.1529663Tanter, M., Thomas, J.-L., & Fink, M. (1998). Focusing and steering through absorbing and aberrating layers: Application to ultrasonic propagation through the skull. The Journal of the Acoustical Society of America, 103(5), 2403-2410. doi:10.1121/1.422759Hertzberg, Y., Volovick, A., Zur, Y., Medan, Y., Vitek, S., & Navon, G. (2010). Ultrasound focusing using magnetic resonance acoustic radiation force imaging: Application to ultrasound transcranial therapy. Medical Physics, 37(6Part1), 2934-2942. doi:10.1118/1.3395553Jolesz, F. A. (Ed.). (2014). Intraoperative Imaging and Image-Guided Therapy. doi:10.1007/978-1-4614-7657-3Shen, C., Xu, J., Fang, N. X., & Jing, Y. (2014). Anisotropic Complementary Acoustic Metamaterial for Canceling out Aberrating Layers. Physical Review X, 4(4). doi:10.1103/physrevx.4.041033Maimbourg, G., Houdouin, A., Deffieux, T., Tanter, M., & Aubry, J.-F. (2018). 3D-printed adaptive acoustic lens as a disruptive technology for transcranial ultrasound therapy using single-element transducers. Physics in Medicine & Biology, 63(2), 025026. doi:10.1088/1361-6560/aaa037Ferri, M., Bravo, J. M., Redondo, J., & Sánchez-Pérez, J. V. (2019). Enhanced Numerical Method for the Design of 3-D-Printed Holographic Acoustic Lenses for Aberration Correction of Single-Element Transcranial Focused Ultrasound. Ultrasound in Medicine & Biology, 45(3), 867-884. doi:10.1016/j.ultrasmedbio.2018.10.022Hynynen, K., McDannold, N., Vykhodtseva, N., & Jolesz, F. A. (2001). Noninvasive MR Imaging–guided Focal Opening of the Blood-Brain Barrier in Rabbits. Radiology, 220(3), 640-646. doi:10.1148/radiol.2202001804Tyler, W. J., Tufail, Y., Finsterwald, M., Tauchmann, M. L., Olson, E. J., & Majestic, C. (2008). Remote Excitation of Neuronal Circuits Using Low-Intensity, Low-Frequency Ultrasound. PLoS ONE, 3(10), e3511. doi:10.1371/journal.pone.0003511Schneider, U., Pedroni, E., & Lomax, A. (1996). The calibration of CT Hounsfield units for radiotherapy treatment planning. Physics in Medicine and Biology, 41(1), 111-124. doi:10.1088/0031-9155/41/1/009Mast, T. D. (2000). Empirical relationships between acoustic parameters in human soft tissues. Acoustics Research Letters Online, 1(2), 37-42. doi:10.1121/1.1336896Mazziotta, J. C., Toga, A. W., Evans, A., Fox, P., & Lancaster, J. (1995). A Probabilistic Atlas of the Human Brain: Theory and Rationale for Its Development. NeuroImage, 2(2), 89-101. doi:10.1006/nimg.1995.1012Yushkevich, P. A., Piven, J., Hazlett, H. C., Smith, R. G., Ho, S., Gee, J. C., & Gerig, G. (2006). User-guided 3D active contour segmentation of anatomical structures: Significantly improved efficiency and reliability. NeuroImage, 31(3), 1116-1128. doi:10.1016/j.neuroimage.2006.01.015Treeby, B. E., & Cox, B. T. (2010). Modeling power law absorption and dispersion for acoustic propagation using the fractional Laplacian. The Journal of the Acoustical Society of America, 127(5), 2741-2748. doi:10.1121/1.3377056Treeby, B. E., Jaros, J., Rendell, A. P., & Cox, B. T. (2012). Modeling nonlinear ultrasound propagation in heterogeneous media with power law absorption using a k-space pseudospectral method. The Journal of the Acoustical Society of America, 131(6), 4324-4336. doi:10.1121/1.4712021Jiménez, N., Camarena, F., Redondo, J., Sánchez-Morcillo, V., Hou, Y., & Konofagou, E. E. (2016). Time-Domain Simulation of Ultrasound Propagation in a Tissue-Like Medium Based on the Resolution of the Nonlinear Acoustic Constitutive Relations. Acta Acustica united with Acustica, 102(5), 876-892. doi:10.3813/aaa.919002Jiménez, N., Romero-García, V., Pagneux, V., & Groby, J.-P. (2017). Quasiperfect absorption by subwavelength acoustic panels in transmission using accumulation of resonances due to slow sound. Physical Review B, 95(1). doi:10.1103/physrevb.95.014205Tsang, P. W. M., & Poon, T.-C. (2013). Novel method for converting digital Fresnel hologram to phase-only hologram based on bidirectional error diffusion. Optics Express, 21(20), 23680. doi:10.1364/oe.21.023680Lirette, R., & Mobley, J. (2017). Focal zone characteristics of stepped Fresnel and axicon acoustic lenses. doi:10.1121/2.0000703Gatto, M., Memoli, G., Shaw, A., Sadhoo, N., Gelat, P., & Harris, R. A. (2012). Three-Dimensional Printing (3DP) of neonatal head phantom for ultrasound: Thermocouple embedding and simulation of bone. Medical Engineering & Physics, 34(7), 929-937. doi:10.1016/j.medengphy.2011.10.012Robertson, J., Martin, E., Cox, B., & Treeby, B. E. (2017). Sensitivity of simulated transcranial ultrasound fields to acoustic medium property maps. Physics in Medicine and Biology, 62(7), 2559-2580. doi:10.1088/1361-6560/aa5e98Hill, C. R., Bamber, J. C., & ter Haar, G. R. (Eds.). (2004). Physical Principles of Medical Ultrasonics. doi:10.1002/0470093978O’Neil, H. T. (1949). Theory of Focusing Radiators. The Journal of the Acoustical Society of America, 21(5), 516-526. doi:10.1121/1.1906542Chen, D.-C., Zhu, X.-F., Wei, Q., Wu, D.-J., & Liu, X.-J. (2018). Broadband acoustic focusing by Airy-like beams based on acoustic metasurfaces. Journal of Applied Physics, 123(4), 044503. doi:10.1063/1.501070

Acoustic metamaterial absorbers based on multilayered sonic crystals

Through the use of a layered arrangement, it is shown that lossy sonic crystals can be arranged to create a structure with extreme acoustic properties, namely, an acoustic metamaterial. This artificial structure shows different effective fluids and absorptive properties in different orientations. Theoretical, numerical, and experimental results examining thermoviscous losses in sonic crystals are presented, enabling the fabrication and characterization of an acoustic metamaterial absorber with complex-valued anisotropic inertia. To accurately describe and fabricate such an acoustic metamaterial in a realizable experimental configuration, confining structures are needed which modify the effective properties, due to the thermal and viscous boundary layer effects within the sonic crystal lattice. Theoretical formulations are presented which describe the effects of these confined sonic crystals, both individually and as part of an acoustic metamaterial structure. Experimental demonstrations are also reported using an acoustic impedance tube. The formulations developed can be written with no unknown or empirical coefficients, due to the structured lattice of the sonic crystals and organized layering scheme; and it is shown that higher filling fraction arrangements can be used to provide a large enhancement in the loss factor. (C) 2015 AIP Publishing LLC.This work was supported by the U.S. Office of Naval Research (Award No. N000141210216) and by the Spanish Ministerio de Economia y Competitividad (MINECO) under Contract No. TEC2010-19751.Guild, M.; García Chocano, VM.; Kan, W.; Sánchez-Dehesa Moreno-Cid, J. (2015). Acoustic metamaterial absorbers based on multilayered sonic crystals. Journal of Applied Physics. 117(11):114902-1-114902-14. https://doi.org/10.1063/1.4915346S114902-1114902-1411711Dowling, J. P. (1992). Sonic band structure in fluids with periodic density variations. The Journal of the Acoustical Society of America, 91(5), 2539-2543. doi:10.1121/1.402990Sigalas, M. M., & Economou, E. N. (1992). Elastic and acoustic wave band structure. Journal of Sound and Vibration, 158(2), 377-382. doi:10.1016/0022-460x(92)90059-7Sánchez-Pérez, J. V., Caballero, D., Mártinez-Sala, R., Rubio, C., Sánchez-Dehesa, J., Meseguer, F., … Gálvez, F. (1998). Sound Attenuation by a Two-Dimensional Array of Rigid Cylinders. Physical Review Letters, 80(24), 5325-5328. doi:10.1103/physrevlett.80.5325Kock, W. E., & Harvey, F. K. (1949). Refracting Sound Waves. The Journal of the Acoustical Society of America, 21(5), 471-481. doi:10.1121/1.1906536Cervera, F., Sanchis, L., Sánchez-Pérez, J. V., Martínez-Sala, R., Rubio, C., Meseguer, F., … Sánchez-Dehesa, J. (2001). Refractive Acoustic Devices for Airborne Sound. Physical Review Letters, 88(2). doi:10.1103/physrevlett.88.023902Torrent, D., Håkansson, A., Cervera, F., & Sánchez-Dehesa, J. (2006). Homogenization of Two-Dimensional Clusters of Rigid Rods in Air. Physical Review Letters, 96(20). doi:10.1103/physrevlett.96.204302Torrent, D., & Sánchez-Dehesa, J. (2008). Anisotropic mass density by two-dimensional acoustic metamaterials. New Journal of Physics, 10(2), 023004. doi:10.1088/1367-2630/10/2/023004Cummer, S. A., Popa, B.-I., Schurig, D., Smith, D. R., Pendry, J., Rahm, M., & Starr, A. (2008). Scattering Theory Derivation of a 3D Acoustic Cloaking Shell. Physical Review Letters, 100(2). doi:10.1103/physrevlett.100.024301Torrent, D., & Sánchez-Dehesa, J. (2008). Acoustic cloaking in two dimensions: a feasible approach. New Journal of Physics, 10(6), 063015. doi:10.1088/1367-2630/10/6/063015Li, J., Fok, L., Yin, X., Bartal, G., & Zhang, X. (2009). Experimental demonstration of an acoustic magnifying hyperlens. Nature Materials, 8(12), 931-934. doi:10.1038/nmat2561Pendry, J. B., & Li, J. (2008). An acoustic metafluid: realizing a broadband acoustic cloak. New Journal of Physics, 10(11), 115032. doi:10.1088/1367-2630/10/11/115032Popa, B.-I., & Cummer, S. A. (2009). Design and characterization of broadband acoustic composite metamaterials. Physical Review B, 80(17). doi:10.1103/physrevb.80.174303Torrent, D., & Sánchez-Dehesa, J. (2010). Anisotropic Mass Density by Radially Periodic Fluid Structures. Physical Review Letters, 105(17). doi:10.1103/physrevlett.105.174301Gumen, L. N., Arriaga, J., & Krokhin, A. A. (2011). Metafluid with anisotropic dynamic mass. Low Temperature Physics, 37(11), 975-978. doi:10.1063/1.3672821Zigoneanu, L., Popa, B.-I., Starr, A. F., & Cummer, S. A. (2011). Design and measurements of a broadband two-dimensional acoustic metamaterial with anisotropic effective mass density. Journal of Applied Physics, 109(5), 054906. doi:10.1063/1.3552990Reyes-Ayona, E., Torrent, D., & Sánchez-Dehesa, J. (2012). Homogenization theory for periodic distributions of elastic cylinders embedded in a viscous fluid. The Journal of the Acoustical Society of America, 132(4), 2896-2908. doi:10.1121/1.4744933Naify, C. J., Chang, C.-M., McKnight, G., & Nutt, S. (2010). Transmission loss and dynamic response of membrane-type locally resonant acoustic metamaterials. Journal of Applied Physics, 108(11), 114905. doi:10.1063/1.3514082Yang, Z., Dai, H. M., Chan, N. H., Ma, G. C., & Sheng, P. (2010). Acoustic metamaterial panels for sound attenuation in the 50–1000 Hz regime. Applied Physics Letters, 96(4), 041906. doi:10.1063/1.3299007Naify, C. J., Chang, C.-M., McKnight, G., Scheulen, F., & Nutt, S. (2011). Membrane-type metamaterials: Transmission loss of multi-celled arrays. Journal of Applied Physics, 109(10), 104902. doi:10.1063/1.3583656Hussein, M. I., & Frazier, M. J. (2013). Metadamping: An emergent phenomenon in dissipative metamaterials. Journal of Sound and Vibration, 332(20), 4767-4774. doi:10.1016/j.jsv.2013.04.041Zhang, Y., Wen, J., Zhao, H., Yu, D., Cai, L., & Wen, X. (2013). Sound insulation property of membrane-type acoustic metamaterials carrying different masses at adjacent cells. Journal of Applied Physics, 114(6), 063515. doi:10.1063/1.4818435Manimala, J. M., & Sun, C. T. (2014). Microstructural design studies for locally dissipative acoustic metamaterials. Journal of Applied Physics, 115(2), 023518. doi:10.1063/1.4861632Oudich, M., Zhou, X., & Badreddine Assouar, M. (2014). General analytical approach for sound transmission loss analysis through a thick metamaterial plate. Journal of Applied Physics, 116(19), 193509. doi:10.1063/1.4901997Christensen, J., Romero-García, V., Picó, R., Cebrecos, A., de Abajo, F. J. G., Mortensen, N. A., … Sánchez-Morcillo, V. J. (2014). Extraordinary absorption of sound in porous lamella-crystals. Scientific Reports, 4(1). doi:10.1038/srep04674Sánchez-Dehesa, J., Garcia-Chocano, V. M., Torrent, D., Cervera, F., Cabrera, S., & Simon, F. (2011). Noise control by sonic crystal barriers made of recycled materials. The Journal of the Acoustical Society of America, 129(3), 1173-1183. doi:10.1121/1.3531815García-Chocano, V. M., Cabrera, S., & Sánchez-Dehesa, J. (2012). Broadband sound absorption by lattices of microperforated cylindrical shells. Applied Physics Letters, 101(18), 184101. doi:10.1063/1.4764560Climente, A., Torrent, D., & Sánchez-Dehesa, J. (2012). Omnidirectional broadband acoustic absorber based on metamaterials. Applied Physics Letters, 100(14), 144103. doi:10.1063/1.3701611Allard, J., & Champoux, Y. (1992). New empirical equations for sound propagation in rigid frame fibrous materials. The Journal of the Acoustical Society of America, 91(6), 3346-3353. doi:10.1121/1.402824Johnson, D. L., Koplik, J., & Dashen, R. (1987). Theory of dynamic permeability and tortuosity in fluid-saturated porous media. Journal of Fluid Mechanics, 176(-1), 379. doi:10.1017/s0022112087000727Tarnow, V. (1996). Compressibility of air in fibrous materials. The Journal of the Acoustical Society of America, 99(5), 3010-3017. doi:10.1121/1.414790Peyrega, C., & Jeulin, D. (2013). Estimation of acoustic properties and of the representative volume element of random fibrous media. Journal of Applied Physics, 113(10), 104901. doi:10.1063/1.4794501Perrot, C., Chevillotte, F., & Panneton, R. (2008). Dynamic viscous permeability of an open-cell aluminum foam: Computations versus experiments. Journal of Applied Physics, 103(2), 024909. doi:10.1063/1.2829774Perrot, C., Chevillotte, F., & Panneton, R. (2008). Bottom-up approach for microstructure optimization of sound absorbing materials. The Journal of the Acoustical Society of America, 124(2), 940-948. doi:10.1121/1.2945115Perrot, C., Chevillotte, F., Tan Hoang, M., Bonnet, G., Bécot, F.-X., Gautron, L., & Duval, A. (2012). Microstructure, transport, and acoustic properties of open-cell foam samples: Experiments and three-dimensional numerical simulations. Journal of Applied Physics, 111(1), 014911. doi:10.1063/1.3673523Tarnow, V. (1996). Airflow resistivity of models of fibrous acoustic materials. The Journal of the Acoustical Society of America, 100(6), 3706-3713. doi:10.1121/1.417233Kuwabara, S. (1959). The Forces experienced by Randomly Distributed Parallel Circular Cylinders or Spheres in a Viscous Flow at Small Reynolds Numbers. Journal of the Physical Society of Japan, 14(4), 527-532. doi:10.1143/jpsj.14.527Tournat, V., Pagneux, V., Lafarge, D., & Jaouen, L. (2004). Multiple scattering of acoustic waves and porous absorbing media. Physical Review E, 70(2). doi:10.1103/physreve.70.026609Martin, P. A., Maurel, A., & Parnell, W. J. (2010). Estimating the dynamic effective mass density of random composites. The Journal of the Acoustical Society of America, 128(2), 571-577. doi:10.1121/1.3458849Attenborough, K. (1983). Acoustical characteristics of rigid fibrous absorbents and granular materials. The Journal of the Acoustical Society of America, 73(3), 785-799. doi:10.1121/1.389045Evans, J. M., & Attenborough, K. (2002). Sound propagation in concentrated emulsions: Comparison of coupled phase model and core-shell model. The Journal of the Acoustical Society of America, 112(5), 1911-1917. doi:10.1121/1.1510142Schoenberg, M., & Sen, P. N. (1983). Properties of a periodically stratified acoustic half‐space and its relation to a Biot fluid. The Journal of the Acoustical Society of America, 73(1), 61-67. doi:10.1121/1.388724Arnott, W. P., Bass, H. E., & Raspet, R. (1991). General formulation of thermoacoustics for stacks having arbitrarily shaped pore cross sections. The Journal of the Acoustical Society of America, 90(6), 3228-3237. doi:10.1121/1.401432Fokin, V., Ambati, M., Sun, C., & Zhang, X. (2007). Method for retrieving effective properties of locally resonant acoustic metamaterials. Physical Review B, 76(14). doi:10.1103/physrevb.76.144302Baccigalupi, A. (1999). ADC testing methods. Measurement, 26(3), 199-205. doi:10.1016/s0263-2241(99)00033-0Salissou, Y., & Panneton, R. (2010). Wideband characterization of the complex wave number and characteristic impedance of sound absorbers. The Journal of the Acoustical Society of America, 128(5), 2868-2876. doi:10.1121/1.3488307Song, B. H., & Bolton, J. S. (2000). A transfer-matrix approach for estimating the characteristic impedance and wave numbers of limp and rigid porous materials. The Journal of the Acoustical Society of America, 107(3), 1131-1152. doi:10.1121/1.428404Guild, M. D., Garcia-Chocano, V. M., Kan, W., & Sánchez-Dehesa, J. (2014). Enhanced inertia from lossy effective fluids using multi-scale sonic crystals. AIP Advances, 4(12), 124302. doi:10.1063/1.490188

Levy stable distribution and [0,2] power law dependence of acoustic absorption on frequency

The absorption of acoustic wave propagation in a broad variety of lossy media is characterized by an empirical power law function of frequency, w^y. It has long been noted that exponent y ranges from 0 to 2 for diverse media. Recently, the present author developed a fractional Laplacian wave equation to accurately model the power law dissipation, which can be further reduced to the fractional Laplacian diffusion equation. The latter is known underlying the Levy stable distribution theory. Consequently, the parameters y is found to be the Levy stability index, which is known bounded within 0<y\le2. This finding first provides a theoretical explanation of empirical observations 0<y<=2. Statistically, the frequency-dependent absorption can thus be understood a Levy stable process, where the parameter y describes the fractal nature of attenuative media.Comment: Welcome any comments to [email protected]

Equation level matching: An extension of the method of matched asymptotic expansion for problems of wave propagation

We introduce an alternative to the method of matched asymptotic expansions. In the "traditional" implementation, approximate solutions, valid in different (but overlapping) regions are matched by using "intermediate" variables. Here we propose to match at the level of the equations involved, via a "uniform expansion" whose equations enfold those of the approximations to be matched. This has the advantage that one does not need to explicitly solve the asymptotic equations to do the matching, which can be quite impossible for some problems. In addition, it allows matching to proceed in certain wave situations where the traditional approach fails because the time behaviors differ (e.g., one of the expansions does not include dissipation). On the other hand, this approach does not provide the fairly explicit approximations resulting from standard matching. In fact, this is not even its aim, which to produce the "simplest" set of equations that capture the behavior

Aerogel as a Soft Acoustic Metamaterial for Airborne Sound

Soft acoustic metamaterials utilizing mesoporous structures have been proposed recently as a means for tuning the overall effective properties of the metamaterial and providing better coupling to the surrounding air. In this paper, the use of silica aerogel is examined theoretically and experimentally as part of a compact soft acoustic metamaterial structure, which enables a wide range of exotic effective macroscopic properties to be demonstrated, including negative density, density near zero, and nonresonant broadband slow-sound propagation. Experimental data are obtained on the effective density and sound speed using an air-filled acoustic impedance tube for flexural metamaterial elements, which have been investigated previously only indirectly due to the large contrast in acoustic impedance compared to that of air. Experimental results are presented for silica aerogel arranged in parallel with either one or two acoustic ports and are in very good agreement with the theoretical model.This work is supported by the U.S. Office of Naval Research. M. D. G., V. M. G.-C. and J. S.-D. also acknowledge the support by the Spanish Ministerio de Economia y Competitividad, and the European Union Fondo Europeo de Desarrollo Regional (FEDER) through Project No. TEC2014-53088-C3-1-R. The authors wish to acknowledge Encarna G. Villora and Kiyoshi Shimamura for their help in aerogel fabrication and handling.Guild, M.; García Chocano, VM.; Sánchez-Dehesa Moreno-Cid, J.; Martin, TP.; Calvo, DC.; Orris, GJ. (2016). Aerogel as a Soft Acoustic Metamaterial for Airborne Sound. Physical Review Applied. 5(3):034012-1-034012-13. https://doi.org/10.1103/PhysRevApplied.5.034012S034012-1034012-135

The Lore of Low Methane Livestock:Co-Producing Technology and Animals for Reduced Climate Change Impact

Methane emissions from sheep and cattle production have gained increasing profile in the context of climate change. Policy and scientific research communities have suggested a number of technological approaches to mitigate these emissions. This paper uses the concept of co-production as an analytical framework to understand farmers’ evaluation of a 'good animal’. It examines how technology and sheep and beef cattle are co-produced in the context of concerns about the climate change impact of methane. Drawing on 42 semi-structured interviews, this paper demonstrates that methane emissions are viewed as a natural and integral part of sheep and beef cattle by farmers, rather than as a pollutant. Sheep and beef cattle farmers in the UK are found to be an extremely heterogeneous group that need to be understood in their specific social, environmental and consumer contexts. Some are more amenable to appropriating methane reducing measures than others, but largely because animals are already co-constructed from the natural and the technical for reasons of increased production efficiency

Acoustic Metameterial with Negative Modulus

We present experimental and theoretical results on an acoustic metamaterial that exhibits negative effective modulus in a frequency range from 0 to 450 Hz. One-dimensional acoustic metamaterial with an array of side holes on a tube was fabricated. We observed that acoustic waves above 450 Hz propagated well in this structure, but no sound below 450 Hz passed through. The frequency characteristics of the metamaterial has the same form as that of the permittivity in metals due to the plasma oscillation. We also provide a theory to explain the experimental results