A sound card based multi-channel frequency measurement system

For physical processes which express themselves as a frequency, for example magnetic field measurements using optically-pumped alkali-vapor magnetometers, the precise extraction of the frequency from the noisy signal is a classical problem. We describe herein a frequency measurement system based on an inexpensive commercially available computer sound card coupled with a software single-tone estimator which reaches Cram\'er--Rao limited performance, a feature which commercial frequency counters often lack. Characterization of the system and examples of its successful application to magnetometry are presented.Comment: 4 pages, 3 figures, 1 tabl

Sensitivity of double resonance alignment magnetometers

We present an experimental study of the intrinsic magnetometric sensitivity of an optical/rf-frequency double resonance magnetometer in which linearly polarized laser light is used in the optical pumping and detection processes. We show that a semi-empirical model of the magnetometer can be used to describe the magnetic resonance spectra. Then, we present an efficient method to predict the optimum operating point of the magnetometer, i.e., the light power and rf Rabi frequency providing maximum magnetometric sensitivity. Finally, we apply the method to investigate the evolution of the optimum operating point with temperature. The method is very efficient to determine relaxation rates and thus allowed us to determine the three collisional disalignment cross sections for the components of the alignment tensor. Both first and second harmonic signals from the magnetometer are considered and compared

A room temperature 19-channel magnetic field mapping device for cardiac signals

We present a multichannel cardiac magnetic field imaging system built in Fribourg from optical double-resonance Cs vapor magnetometers. It consists of 25 individual sensors designed to record magnetic field maps of the beating human heart by simultaneous measurements on a grid of 19 points over the chest. The system is operated as an array of second order gradiometers using sophisticated digitally controlled feedback loops.Comment: 3 pages, 3 figures, submitted to Applied Physics Letter

A large sample study of spin relaxation and magnetometric sensitivity of paraffin-coated Cs vapor cells

We have manufactured more than 250 nominally identical paraffin-coated Cs vapor cells (30 mm diameter bulbs) for multi-channel atomic magnetometer applications. We describe our dedicated cell characterization apparatus. For each cell we have determined the intrinsic longitudinal, \sGamma{01}, and transverse, \sGamma{02}, relaxation rates. Our best cell shows \sGamma{01}/2\pi\approx 0.5 Hz, and \sGamma{02}/2\pi\approx 2 Hz. We find a strong correlation of both relaxation rates which we explain in terms of reservoir and spin exchange relaxation. For each cell we have determined the optimal combination of rf and laser powers which yield the highest sensitivity to magnetic field changes. Out of all produced cells, 90% are found to have magnetometric sensitivities in the range of 9 to 30 fTHz. Noise analysis shows that the magnetometers operated with such cells have a sensitivity close to the fundamental photon shot noise limit

IR thermography applied to flash experiments of semitransparent TBCs

Abstract Thermal Barrier Coatings (TBC) are applied to protect components of gas turbines from high temperature of combustion gases. ZrO 2 , the material mainly used in TBCs, is semitransparent to near IR radiation that is typically delivered by the laser in the laser flash equipment and also radiated at working temperatures that are grater than 1000 °C. Thermography and radiometers are utilized to measure thermal diffusivity of TBCs. Discussion is done on the countermeasures to obtain correct results in case of semitransparency

Dialelo parcial entre clones de Eucalyptus camaldulensis e clones de E. urophylla, E. grandis e E. saligna.

O objetivo deste trabalho foi identificar combinações híbridas superiores nos cruzamentos entre clones-elite de Eucalyptus grandis, E. urophylla e E. saligna com clones-elite de E. camaldulensis da Aracruz Celulose S.A., por meio de cruzamentos dialélicos parciais. Para isso, as 44 combinações híbridas obtidas e mais quatro testemunhas foram plantadas de setembro a outubro de 2001, em três localidades: Aracruz, ES; São Mateus, ES; e Caravelas, BA, no delineamento de blocos casualizados com 40 repetições e uma planta por parcela. Dois anos após o plantio, foram avaliadas a circunferência à altura do peito (CAP) e a densidade básica da madeira (DEN). Os dados médios foram submetidos à análise dialélica segundo o método de Griffing (1956), adaptado por Geraldi e Miranda Filho (1988). Constatou-se que muitos híbridos foram promissores tanto para a obtenção de ganhos em CAP quanto para obter a densidade da madeira, pois associaram média e variância altas. A maior parte da variação entre os híbridos foi explicada pela capacidade geral de combinação, indicando a predominância de efeitos aditivos no controle dos caracteres. Palavras-chave: Eucalipto, melhoramento e capacidade de combinação

Comparison between open pollinated progenies and hybrids performance in Eucalyptus grandis and Eucalyptus urophylla.

The cellulose industry in Brazil uses, mainly, hybrids between Eucalyptus grandis x E. urophylla. Not only the volume but also the wood density has great influence in the cellulose productivity, therefore a selection for both characteristics should be done as an alternative to increase the improvement program efficiency. The present work has been carried out with the objective of comparison between Open Pollinated progenies (OP) and hybrids performance in E. grandis and E. urophylla. To do so, 15 OP progenies of E. grandis, 15 OP progenies of E. urophylla, and 15 hybrids between E. grandis x E. urophylla, plus four controls were evaluated. The experiment was carried out from October to November 2001, in three sites, Aracruz and São Mateus, in the Espírito Santo State, and Caravelas, Bahia State, Brazil, in a 14 x 14 lattice design, involving the 49 treatments mentioned plus other progenies not considered in this article, with single tree plots and 40 replicates. Two years later the circumference at breast height (CBH) and the basic wood density (BWD) were evaluated. The hybrids performance for CBH was higher, an average, 38,7% than the OP progenies for both species. Part of the heterosis in relation to parental means could be attributed to the inbreeding depression due to selfing that occurred in the OP progenies and the dominance controlling this character. For the BWD the hybrids performance was the same of the OP progenies. Since there was divergence between the parents, it can be inferred that dominance has no importance for this trait. The negative correlation between the CBH and the BWD could impair the simultaneous selection for both traits, depending on the wood basic density range used by the industry

Combining ability of elite clones of Eucalyptus grandisand Eucalyptus urophylla with Eucalyptus globulus.

In Brazil, eucalyptus breeding programs for cellulose production has used two species, Eucalyptus grandis and Eucalyptus urophylla. Nevertheless, it would be useful to introgress alleles from other species to improve wood quality and volume. The objective of this research was to evaluate the hybrid potential of elite clones of E. grandis and E. urophylla from the Aracruz Celulose Company S. A. with Eucalyptus globulus clones. To do so, six elite clones were crossed with ten E. globulus clones in a half-diallel mating design. The resulting hybrid combinations as well as the four check clones were evaluated in randomized complete block experiments with single plant plots and 40 replicates from September to October 2001 at three Brazilian sites, Aracruz and São Mateus in the Espírito Santo state and Caravelas in Bahia State. Two years later the circumference at breast height (CBH) and the wood density (WD) were measured. The means were submitted to diallel analysis according to the Griffing method (1956), adapted by Geraldi and Miranda Filho (1988). Although the number of clones involved was small, the crossings of elite clones of E. grandis and E. urophylla with clones of E. globulus were promising, especially for wood quality gains