Localization of light on a cone: theoretical evidence and experimental demonstration for an optical fiber

The classical motion at a conical surface is bounded at one (narrower) side of the cone and unbounded at the other. However, it is shown here that a dielectric cone with a small half-angle gamma can perform as a high Q-factor optical microresonator which completely confines light. The theory of the discovered localized conical states is in excellent agreement with experimental data. It provides both a unique approach for extremely accurate local characterization of optical fibers (which usually have gamma ~10^-5 or less) and a new paradigm in the field of high Q-factor resonators

Streamlined life cycle assessment of transparent silica aerogel made by supercritical drying

This is the post-print version of the Article. The official published version can be accessed from the link below - Copyright @ 2011 ElsevierWhen developing sustainable building fabric technologies, it is essential that the energy use and CO2 burden arising from manufacture does not outweigh the respective in-use savings. This study investigates this paradigm by carrying out a streamlined life cycle assessment (LCA) of silica aerogel. This unique, nanoporous translucent insulation material has the lowest thermal conductivity of any solid, retaining up to four times as much heat as conventional insulation, whilst being highly transparent to light and solar radiation. Monolithic silica aerogel has been cited as the ‘holy grail’ of future glazing technology. Alternatively, translucent granular aerogel is now being produced on a commercial scale. In each case, many solvents are used in production, often accompanied by intensive drying processes, which may consume large amounts of energy and CO2. To date, there has been no peer-reviewed LCA of this material conducted to the ISO 14000 standard. Primary data for this ‘cradle-to-factory gate’ LCA is collected for silica aerogel made by low and high temperature supercritical drying. In both cases, the mass of raw materials and electricity usage for each process is monitored to determine the total energy use and CO2 burden. Findings are compared against the predicted operational savings arising from retrofitting translucent silica aerogel to a single glazed window to upgrade its thermal performance. Results should be treated as a conservative estimate as the aerogel is produced in a laboratory, which has not been developed for mass manufacture or refined to reduce its environmental impact. Furthermore, the samples are small and assumptions to upscale the manufacturing volume occur without major changes to production steps or equipment used. Despite this, parity between the CO2 burden and CO2 savings is achieved in less than 2 years, indicating that silica aerogel can provide a measurable environmental benefit.This work is funded by the EPSRC, Brunel University and Buro Happold Ltd, the University of Bath is funded by the EPSRC grant EP/F018622/1

Channeling Effect and Improvement of the Efficiency of Charged Particle Registration with Crystal Scintillators

The importance is emphasized of taking into account the channeling along the low index crystallographic axes and planes of a part of low-energy (1-10 keV) recoil ions in measurements of their parameters with crystal scintillators of the type of NaI(Tl) etc. Because the nucleus stopping power in channels is low as compared with electronic stopping power, the light yield of the scintillator must be, accordingly, higher in the given case than that for ions having higher energy (tens keV and more), which lose most part of their energy via nuclear collisions outside channels. Hence, in particular, it follows that the DAMA/NaI observations in Gran Sasso of the annual modulation of the signal frequency in a narrow range of scintillations with an amplitude of 2-6 keV electron equivalent may be due to incidence onto the Earth of exceedingly massive particles (of the type of Planckian objects) from elongated Earth-crossing heliocentric orbits at a velocity of 30-50 km/s. In NaI(Tl), these particles create the iodine recoil ions with just the energy of 2-6 keV.Comment: 10 page

The high-lying 6^6Li levels at excitation energy around 21 MeV

The $^3$H+$^3$He cluster structure in $^6$Li was investigated by the $^3$H($\alpha$,$^3$H $^3$He)n kinematically complete experiment at the incident energy $E_\alpha$ = 67.2 MeV. We have observed two resonances at $E_x^*$ = 21.30 and 21.90 MeV which are consistent with the $^3$He($^3$H, $\gamma$)$^6$Li analysis in the Ajzenberg-Selove compilation. Our data are compared with the previous experimental data and the RGM and CSRGM calculations.Comment: 12 pages, 6 figures. Accepted for publication in J. Phys. Soc. Jp

Improved large-mode area endlessly single-mode photonic crystal fibers

We numerically study the possibilities for improved large-mode area endlessly single mode photonic crystal fibers for use in high-power delivery applications. By carefully choosing the optimal hole diameter we find that a triangular core formed by three missing neighboring air holes considerably improves the mode area and loss properties compared to the case with a core formed by one missing air hole. In a realized fiber we demonstrate an enhancement of the mode area by ~30 % without a corresponding increase in the attenuation.Comment: 3 pages including 3 eps-figures. Accepted for Optics Letter

Practice pointer: Using the new UK-WHO growth charts

The new UK growth charts for children aged 0-4 years (designed using data from the new WHO standards) describe the optimal pattern of growth for all children, rather than the prevailing pattern in the UK (as with previous charts). The new charts are suitable for all ethnic groups and set breast feeding as the norm. UK children match the new charts well for length and height, but after age 6 months fewer children will be below the 2nd centile for weight or show weight faltering, and more will be above the 98th centile. The new charts look different: they have a separate preterm section, no lines between 0 and 2 weeks, and the 50th percentile is no longer emphasised. The charts give clear instructions on gestational correction, and there is a new chart for infants born before 32 weeks’ gestation. The instructions advise on when and how to measure and when a measurement or growth pattern is outside the normal range. The charts include a “look-up” tool for determining the body mass index centile from height and weight centiles without calculation and aid for predicting adult height. The charts and supporting educational materials can be downloaded from www.growthcharts.rcpch.ac.u

Full-vector analysis of a realistic photonic crystal fiber

We analyze the guiding problem in a realistic photonic crystal fiber using a novel full-vector modal technique, a biorthogonal modal method based on the nonselfadjoint character of the electromagnetic propagation in a fiber. Dispersion curves of guided modes for different fiber structural parameters are calculated along with the 2D transverse intensity distribution of the fundamental mode. Our results match those achieved in recent experiments, where the feasibility of this type of fiber was shown.Comment: 3 figures, submitted to Optics Letter

Managing the mutations: Academic misconduct Australia, New Zealand and the UK

Academic misconduct is a problem of growing concern across the tertiary education sector. While plagiarism has been the most common form of academic misconduct, the advent of software programs to detect plagiarism has seen the problem of misconduct simply mutate. As universities attempt to function in an increasingly complex environment, the factors that contribute to academic misconduct are unlikely to be easily mitigated. A multiple case study approach examined how academic misconduct is perceived in universities in in Australia, New Zealand and the United Kingdom via interviews with academics and administrators. The findings show that academic misconduct is a systemic problem that manifests in various ways and requires similarly diverse approaches to management. Greater consistency in policies and procedures, including a focus on preventative education for both staff and students, is key, to managing the mutations of academic misconduct that continue to plague the higher education sector globally

Bearing witness and being bounded; the experiences of nurses in adult critical care in relation to the survivorship needs of patients and families

Aim: To discern and understand the responses of nurses to the survivorship needs of patients and family members in adult critical care units. Background: The critical care environment is a demanding place of work which may limit nurses to immediacy of care, such is the proximity to death and the pressure of work. Design: A constructivist grounded theory approach with constant comparative analysis. Methods: As part of a wider study and following ethical approval, eleven critical care nurses working within a general adult critical care unit were interviewed with respect to their experiences in meeting the psychosocial needs of patients and family members. Through the process of constant comparative analysis an overarching selective code was constructed. EQUATOR guidelines for qualitative research (COREQ) applied. Results: The data illuminated a path of developing expertise permitting integration of physical, psychological and family care with technology and humanity. Gaining such proficiency is demanding and the data presented reveals the challenges that nurses experience along the way. Conclusion: The study confirms that working within a critical care environment is an emotionally charged challenge and may incur an emotional cost. Nurses can find themselves bounded by the walls of the critical care unit and experience personal and professional conflicts in their role. Nurses bear witness to the early stages of the survivorship trajectory but are limited in their support of ongoing needs. Relevance to Clinical Practice: Critical care nurses can experience personal and professional conflicts when caring for both patients and families. This can lead to moral distress and may contribute to compassion fatigue. Critical care nurses appear bounded to the delivery of physiological and technical care, in the moment, as demanded by the patient's acuity. Consequentially this limits nurses’ ability to support the onward survivorship trajectory. Increased pressure and demands on critical care beds has contributed further to occupational stress in this care setting