New Earth-Abundant Thin Film Solar Cells Based on Chalcogenides.

At the end of 2017 roughly 1.8% of the worldwide electricity came from solar photovoltaics (PV), which is foreseen to have a key role in all major future energy scenarios with an installed capacity around 5 TW by 2050. Despite silicon solar cells currently rule the PV market, the extremely more versatile thin film-based devices (mainly Cu(In,Ga)Se2 and CdTe ones) have almost matched them in performance and present room for improvement. The low availability of some elements in the present commercially available PV technologies and the recent strong fall of silicon module price below 1 $/Wp focused the attention of the scientific community on cheap earth-abundant materials. In this framework, thin film solar cells based on Cu2ZnSnS4 (CZTS) and the related sulfur selenium alloy Cu2ZnSn(S,Se)4 (CZTSSe) were strongly investigated in the last 10 years. More recently, chalcogenide PV absorbers potentially able to face TW range applications better than CZTS and CZTSSe due to the higher abundance of their constituting elements are getting considerable attention. They are based on both MY2 (where M = Fe, Cu, Sn and Y = S and/or Se) and Cu2XSnY4 (where X = Fe, Mn, Ni, Ba, Co, Cd and Y = S and/or Se) chalcogenides. In this work, an extensive review of emerging earth-abundant thin film solar cells based on both MY2 and Cu2XSnY4 species is given, along with some considerations on the abundance and annual production of their constituting elements

AUTOMATIC LINECARD (LC) CAPABILITY DETECTION

Presented herein are techniques to reduce software development code and allow software to automatically detect and adapt the code to the capabilities of a linecard (LC)

Influence of Rare Earth Doping on Microstructure and Luminescence Behaviour of Sodium Sulphate

Na2SO4, Na2SO4: Li, and Na2SO4: Li, Eu, Dy phosphors were prepared by using slow evaporation technique followed by subsequent calcination at 400°C for 4 h. Doping with Li+ ion stabilized the thenardite phase of host matrix, while codoping with RE3+ stabilized the phase transformation from stable thenardite to metastable mirabilite crystal structure. The microstructure and morphology were studied by using scanning electron microscopy and transmission electron microscopy. The thermoluminescence studies revealed that isovalent doping of Li+ served as a quencher and addition of codopant introduces the additional trap sites in the host matrix. The room temperature emission spectra of Li-doped, RE3+-codoped, and undoped Na2SO4 were studied under ultraviolet radiation. For pure Na2SO4 the two peaks which appeared are at 364 and 702 nm, respectively. The emission intensities of RE3+-codoped samples increase with increase in dopant concentration

Key Success Factors and Future Perspective of Silicon-Based Solar Cells

Today, after more than 70 years of continued progress on silicon technology, about 85% of cumulative installed photovolatic (PV) modules are based on crystalline silicon (c-Si). PV devices based on silicon are the most common solar cells currently being produced, and it is mainly due to silicon technology that the PV has grown by 40% per year over the last decade. An additional step in the silicon solar cell development is ongoing, and it is related to a further efficiency improvement through defect control, device optimization, surface modification, and nanotechnology approaches. This paper attempts to briefly review the most important advances and current technologies used to produce crystalline silicon solar devices and in the meantime the most challenging and promising strategies acting to increase the efficiency to cost/ratio of silicon solar cells. Eventually, the impact and the potentiality of using a nanotechnology approach in a silicon-based solar cell are also described

state of the art and perspectives of inorganic photovoltaics

In the last decade, the fast increase of the global energy consumption, mainly related to the strong economic growth in the Far East, and the progressive depletion of the fossil fuels induced a run-up in the world oil price. Both these economic concerns and the growing global pollution pointed out that a transition toward renewable energies is mandatory. Among renewables, the conversion of sunlight into electricity by photovoltaic (PV) devices is a reliable choice to cope the growing energy consumption, due to the huge potentially extractable power (up to 120000 TW). The most important classes of inorganic PV devices developed in the last sixty years will be reviewed in this paper, in order to depict the state of the art of the technologies which dominate the PV market. Some novel concepts which could have an important role in the future of PV will be also described

Assessment of the composition of Silicon-Rich Oxide films for photovoltaic applications by optical techniques

Abstract The deposition of sub-stoichiometric silicon rich oxide (SRO) is the first step to obtain well ordered silicon Quantum Dots (QDs) in a dielectric matrix. This structure is used also for third generation photovoltaic devices operating in a tandem architecture. A precise control and assessment of the stoichiometry of these films is crucial to tune the electrical and optical properties of the device. In this paper we discuss two optical techniques to assess the composition of such films and we compare their results

Quasi-Zero Dimensional Halide Perovskite Derivates: Synthesis, Status, and Opportunity

In recent decades, many technological advances have been enabled by nanoscale phenomena, giving rise to the field of nanotechnology. In particular, unique optical and electronic phenomena occur on length scales less than 10 nanometres, which enable novel applications. Halide perovskites have been the focus of intense research on their optoelectronic properties and have demonstrated impressive performance in photovoltaic devices and later in other optoelectronic technologies, such as lasers and light-emitting diodes. The most studied crystalline form is the three-dimensional one, but, recently, the exploration of the low-dimensional derivatives has enabled new sub-classes of halide perovskite materials to emerge with distinct properties. In these materials, low-dimensional metal halide structures responsible for the electronic properties are separated and partially insulated from one another by the (typically organic) cations. Confinement occurs on a crystal lattice level, enabling bulk or thin-film materials that retain a degree of low-dimensional character. In particular, quasi-zero dimensional perovskite derivatives are proving to have distinct electronic, absorption, and photoluminescence properties. They are being explored for various technologies beyond photovoltaics (e.g. thermoelectrics, lasing, photodetectors, memristors, capacitors, LEDs). This review brings together the recent literature on these zero-dimensional materials in an interdisciplinary way that can spur applications for these compounds. The synthesis methods, the electrical, optical, and chemical properties, the advances in applications, and the challenges that need to be overcome as candidates for future electronic devices have been covered

Growth and Characterization of Cu2Zn1-xFexSnS4 Thin Films for Photovoltaic Applications.

Photovoltaics is a promising technology to produce sustainable energy, thanks to the high amount of energy emitted by the sun. One way of having solar cells with low production costs is to apply thin-film technology and with earth-abundant raw materials. A keen interest is arising in kesterite compounds, which are chalcogenides composed of abundant and non-toxic elements. They have already achieved excellent performance at the laboratory level. Here, we report the synthesis and characterization of mixed chalcogenides based on copper, zinc, iron, and tin. Solutions have been studied with different zinc and iron ratios. The distortion of the elementary cell of kesterite increases with the addition of iron until a phase transition to stannite occurs. The process of synthesis and deposition proposed herein is cheap and straightforward, based on the sol-gel technique. These thin films are particularly attractive for use in cheap and easily processable solar cells. The synthesized layers have been characterized by X-ray diffraction, UV-Vis absorption, and Raman, X-ray photoelectron, and energy-dispersive X-ray spectroscopy measurements

Hybrid sputtering/evaporation deposition of Cu(In,Ga)Se2 thin film solar cells

n/