BN-Doped Metal–Organic Frameworks: Tailoring 2D and 3D Porous Architectures through Molecular Editing of Borazines

Building on the MOF approach to prepare porous materials, herein we report the engineering of porous BN-doped materials using tricarboxylic hexaarylborazine ligands, which are laterally decorated with functional groups at the full-carbon ‘inner shell’. Whilst an open porous 3D entangled structure could be obtained from the double interpenetration of two identical metal frameworks derived from the methyl substituted borazine, the chlorine-functionalised linker undergoes formation of a porous layered 2D honeycomb structure, as shown by single-crystal X-ray diffraction analysis. In this architecture, the borazine cores are rotated by 60° in alternating layers, thus generating large rhombohedral channels running perpendicular to the planes of the networks. An analogous unsubstituted full-carbon metal framework was synthesised for comparison. The resulting MOF revealed a crystalline 3D entangled porous structure, composed by three mutually interpenetrating networks, hence denser than those obtained from the borazine linkers. Their microporosity and CO2 uptake were investigated, with the porous 3D BN-MOF entangled structure exhibiting a large apparent BET specific surface area (1091 m2 g−1) and significant CO2 reversible adsorption (3.31 mmol g−1) at 1 bar and 273 K

Development of efficient aqueous organic redox flow batteries using ion-sieving sulfonated polymer membranes

Redox flow batteries using aqueous organic-based electrolytes are promising candidates for developing cost-effective grid-scale energy storage devices. However, a significant drawback of these batteries is the cross-mixing of active species through the membrane, which causes battery performance degradation. To overcome this issue, here we report size-selective ion-exchange membranes prepared by sulfonation of a spirobifluorene-based microporous polymer and demonstrate their efficient ion sieving functions in flow batteries. The spirobifluorene unit allows control over the degree of sulfonation to optimize the transport of cations, whilst the microporous structure inhibits the crossover of organic molecules via molecular sieving. Furthermore, the enhanced membrane selectivity mitigates the crossover-induced capacity decay whilst maintaining good ionic conductivity for aqueous electrolyte solution at pH 9, where the redox-active organic molecules show long-term stability. We also prove the boosting effect of the membranes on the energy efficiency and peak power density of the aqueous redox flow battery, which shows stable operation for about 120 h (i.e., 2100 charge-discharge cycles at 100 mA cm−2) in a laboratory-scale cell

A robust binary supramolecular organic framework (SOF) with high CO2 adsorption and selectivity

A robust binary hydrogen-bonded supramolecular organic framework (SOF-7) has been synthesized by solvothermal reaction of 1,4-bis-(4-(3,5-dicyano-2,6 dipyridyl)dihydropyridyl)benzene (1) and 5,5’-bis-(azanediyl)-oxalyl-diisophthalic acid (2). Single crystal X-ray diffraction analysis shows that SOF-7 comprises 2 and 1,4-bis-(4-(3,5-dicyano-2,6-dipyridyl)pyridyl)benzene (3), the latter formed in situ from the oxidative dehydrogenation of 1. SOF-7 shows a three-dimensional four-fold interpenetrat-ed structure with complementary O−H···N hydrogen bonds to form channels that are decorated with cyano- and amide-groups. SOF-7 exhibits excellent thermal stability and sol-vent and moisture durability, as well as permanent porosity. The activated desolvated material SOF-7a shows high CO2 sorption capacity and selectivity compared with other po-rous organic materials assembled solely through hydrogen bonding

Triptycene-based organic molecules of intrinsic microporosity

Four Organic Molecules of Intrinsic Microporosity (OMIMs) were prepared by fusing triptycene-based components to a biphenyl core. Due to their rigid molecular structures that cannot pack space efficiently, these OMIMs form amorphous materials with significant microporosity as demonstrated by apparent BET surface areas in the range of 515–702 m2 g–1. Bulky cyclic 1′,2′,3′,4′-tetrahydro-1′,1′,4′,4′-tetramethylbenzo units placed on the triptycene termini are especially efficient at enhancing microporosity

Tunable Porous Organic Crystals: Structural Scope and Adsorption Properties of Nanoporous Steroidal Ureas

Previous work has shown that certain steroidal bis-(N-phenyl)ureas, derived from cholic acid, form crystals in the P61 space group with unusually wide unidimensional pores. A key feature of the nanoporous steroidal urea (NPSU) structure is that groups at either end of the steroid are directed into the channels and may in principle be altered without disturbing the crystal packing. Herein we report an expanded study of this system, which increases the structural variety of NPSUs and also examines their inclusion properties. Nineteen new NPSU crystal structures are described, to add to the six which were previously reported. The materials show wide variations in channel size, shape, and chemical nature. Minimum pore diameters vary from ∼0 up to 13.1 Å, while some of the interior surfaces are markedly corrugated. Several variants possess functional groups positioned in the channels with potential to interact with guest molecules. Inclusion studies were performed using a relatively accessible tris-(N-phenyl)urea. Solvent removal was possible without crystal degradation, and gas adsorption could be demonstrated. Organic molecules ranging from simple aromatics (e.g., aniline and chlorobenzene) to the much larger squalene (Mw = 411) could be adsorbed from the liquid state, while several dyes were taken up from solutions in ether. Some dyes gave dichroic complexes, implying alignment of the chromophores in the NPSU channels. Notably, these complexes were formed by direct adsorption rather than cocrystallization, emphasizing the unusually robust nature of these organic molecular hosts

Characterizing the Structure of Organic Molecules of Intrinsic Microporosity by Molecular Simulations and X-ray Scattering

The design of a new class of materials, called organic molecules of intrinsic microporosity (OMIMs), incorporates awkward, concave shapes to prevent efficient packing of molecules, resulting in microporosity. This work presents predictive molecular simulations and experimental wide-angle X-ray scattering (WAXS) for a series of biphenyl-core OMIMs with varying end-group geometries. Development of the utilized simulation protocol was based on comparison of several simulation methods to WAXS patterns. In addition, examination of the simulated structures has facilitated the assignment of WAXS features to specific intra- and intermolecular distances, making this a useful tool for characterizing the packing behavior of this class of materials. Analysis of the simulations suggested that OMIMs had greater microporosity when the molecules were the most shape-persistent, which required rigid structures and bulky end groups. The simulation protocol presented here allows for predictive, presynthesis screening of OMIMs and similar complex molecules to enhance understanding of their structures and aid in future design efforts

Advanced methods for analysis of mixed gas diffusion in polymeric membranes

The rapid advancement of membrane gas separation processes has spurred the development of new and more efficient membrane materials, including polymers of intrinsic microporosity. The full exploitation of such materials requires thorough understanding of their transport properties, which in turn necessitates the use of powerful and reliable characterization methods. Most methods focus on the permeability, diffusivity and solubility of single gases or only the permeability of mixed gases, while studies reporting the diffusion and solubility of gas mixtures are extremely rare. In this paper we report the use of a mass-spectrometric residual gas analyser to follow the transient phase of mixed gas transport through a benzotriptycene-based ultrapermeable polymer of intrinsic microporosity (PIM-DTFM-BTrip) and a polydimethylsiloxane (PDMS) membrane for comparison, via the continuous online analysis of the permeate. Computational analysis of the entire permeation curve allows the calculation of the mixed gas diffusion coefficients for all individual gases present in the mixture and the identification of non-Fickian diffusion or other anomalous behaviour. The mixed gas transport parameters were analysed by three different approaches (integral, differential and pulse signal), and compared with the results of the ‘classical’ time lag method for single gases. PDMS shows very similar results in all cases, while the transport in the PIM gives different results depending on the specific method and instrument used. This comparative study provides deep insight into the strengths and limitations of the different instruments and data elaboration methods to characterize the transport in rubbery and high free volume glassy membranes with fundamentally different properties and will be of help in the development of novel membrane materials

Characterizing the Structure of Organic Molecules of Intrinsic Microporosity by Molecular Simulations and X‑ray Scattering

The design of a new class of materials, called organic molecules of intrinsic microporosity (OMIMs), incorporates awkward, concave shapes to prevent efficient packing of molecules, resulting in microporosity. This work presents predictive molecular simulations and experimental wide-angle X-ray scattering (WAXS) for a series of biphenyl-core OMIMs with varying end-group geometries. Development of the utilized simulation protocol was based on comparison of several simulation methods to WAXS patterns. In addition, examination of the simulated structures has facilitated the assignment of WAXS features to specific intra- and intermolecular distances, making this a useful tool for characterizing the packing behavior of this class of materials. Analysis of the simulations suggested that OMIMs had greater microporosity when the molecules were the most shape-persistent, which required rigid structures and bulky end groups. The simulation protocol presented here allows for predictive, presynthesis screening of OMIMs and similar complex molecules to enhance understanding of their structures and aid in future design efforts