Characterization of a Boron Carbide Heterojunction Neutron Detector

New methods for neutron detection have become an important area of research in support of national security objectives. In support of this effort, p-type B5C on n-type Si heterojunction diodes have been built and tested. This research sought to optimize the boron carbide (BC) diode by coupling the nuclear physics modeling capability of GEANT4 and TRIM with the semiconductor device simulation tools. Through an iterative modeling process of controllable parameters, optimal device construction was determined such detection efficiency and charge collection were optimized. This allows an estimation of expected charge collection and efficiency given a set of operating parameters that include: silicon resistivity, BC resistivity, BC thickness, silicon thickness, applied bias, and collection contact. Charge collection was maximized with high bias operation of thin BC layers on thin silicon substrates of low resistivity (\u3c10 Ω-cm), while the capture efficiency was maximized for thicker BC layers. Additionally, the effects of neutron damage on BC diodes were studied to determine damage thresholds and resulting device performance and lifetime. The major limitation found for device performance was the increase in the leakage current (~340% at a thermal fluence of 9.7x1013 n cm-2) in the 8k Ω-cm diode. Type inversion was not measured at the total fluence levels achieved, but the 8k Ω-cm diode effective carrier concentrations (Neff) decreased by 30% at a total thermal fluence of 7.5x1013 n cm-2 (1x1013 1 MeV neutron equivalent). For the same irradiation conditions, the 20k Ω-cm diode Neff decreased by 57%. These results indicate that the hardness of the diodes can be improved with low resistivity silicon substrates

Incentivizing Innovation: Promoting Technical Competency to Win Future Wars.

Despite numerous studies and initiatives, most current Air Force efforts to add science and technology talent have been insufficient. This begs the question: How does the Air Force incentivize and promote the necessary technical competence required to win future competition, conflicts, and wars? Several key initiatives, grounded in behavioral economics, can incentivize innovation and pursue science and technology expertise. Developed in the context of peer adversaries’ actions; global trends in technology, competition, and conflict; and the global competition for science and technology talent, these recommendations have the potential to reform institutional culture and unleash the creativity and talent of the officer corps, thereby strengthening the US military’s technical competency to fight and win future wars

Rotating Scatter Mask For Directional Radiation Detection And Imaging

A radiation imaging system images a distributed source of radiation from an unknown direction by rotating a scatter mask around a central axis. The scatter mask has a pixelated outer surface of tangentially oriented, flat geometric surfaces that are spherically varying in radial dimension that corresponds to a discrete amount of attenuation. Rotation position of the scatter mask is tracked as a function of time. Radiation counts from gamma and/or neutron radiation are received from at least one radiation detector that is positioned at or near the central axis. A rotation-angle dependent detector response curve (DRC) is generated based on the received radiation counts. A reconstruction algorithm for distributed radiation source(s) and/or localized source(s) are applied based on the tracked rotation position and prior characterization of the detector response for a given scatter mask. A two-dimensional image with relative orientation and source distribution is generated from the measured DR

Impact of Neutron Energy on Asteroid Deflection Performance

In the future, a hazardous asteroid will find itself on a collision course with Earth. For asteroids of moderate size or larger, a nuclear device is one of humanity\u27s only technologies capable of mitigating this threat via deflection on a timescale of less than a decade. This work examined how the output neutron energy from a nuclear device standoff detonation affects the deflection of a notional asteroid that is 300 meters in diameter and composed of silicon dioxide at a bulk density of 1.855 g/cm3. 14.1 MeV and 1 MeV neutron energy sources were modeled in MCNP to quantify the energy deposition in the asteroid target. The asteroid\u27s irradiated region was discretized in angle by tracing the rays emanating from the point of detonation and in depth by considering the neutron mean-free-paths. This high-fidelity approach was shown to deviate from previous analytic approximations commonly used for asteroid energy deposition. 50 kt and 1 Mt neutron yields of the energy deposition mappings were imported into a hydrodynamic asteroid model in ALE3D to simulate the deflective response due to blow-off ejecta. Underexplored in literature, changing the neutron energy was found to have up to a 70% impact on deflection performance due to induced differences in the energy deposition profile and in the energy coupling efficiency. The magnitude of energy deposition accounted for most of the observed variation in the asteroid velocity change, making the coupling efficiency more significant than the spatial profile characteristics. These findings are vital for determining the optimal source neutron energy spectrum for asteroid deflection applications

Efficient, Dual-particle Directional Detection System Using A Rotating Scatter Mask

A directional radiation detection system and an omnidirectional radiation detector. The omnidirectional radiation detector detects radiation comprising at least one of: (i) gamma rays; and (ii) neutron particles. A radiation scatter mask (RSM) of the radiation detection system includes a rotating sleeve received over the omnidirectional radiation detector and rotating about a longitudinal axis. The RSM further includes: (i) a fin extending longitudinally from one side of the rotating sleeve; and (ii) a wall extending from the rotating sleeve and spaced apart from the fin having an upper end distally positioned on the rotating sleeve spaced apart or next to from a first lateral side of the fin and a lower end proximally positioned on the rotating sleeve and spaced apart from or next to a second lateral side of the fin

Fast-, Light-Cured Scintillating Plastic for 3D-Printing Applications

Additive manufacturing techniques enable a wide range of possibilities for novel radiation detectors spanning simple to highly complex geometries, multi-material composites, and metamaterials that are either impossible or cost prohibitive to produce using conventional methods. The present work identifies a set of promising formulations of photocurable scintillator resins capable of neutron-gamma pulse shape discrimination (PSD) to support the additive manufacturing of fast neutron detectors. The development of these resins utilizes a step-by-step, trial-and-error approach to identify different monomer and cross-linker combinations that meet the requirements for 3D printing followed by a 2-level factorial parameter study to optimize the radiation detection performance, including light yield, PSD, optical clarity, and hardness. The formulations resulted in hard, clear, PSD-capable plastic scintillators that were cured solid within 10 s using 405 nm light. The best-performing scintillator produced a light yield 83% of EJ-276 and a PSD figure of merit equaling 1.28 at 450–550 keVee

The Nuclear Network: Multiplex Network Analysis for Interconnected Systems

States facing the decision to develop a nuclear weapons program do so within a broader context of their relationships with other countries. How these diplomatic, economic, and strategic relationships impact proliferation decisions, however, remains under-specified. Adding to the existing empirical literature that attempts to model state proliferation decisions, this article introduces the first quantitative heterogeneous network analysis of how networks of conflict, alliances, trade, and nuclear cooperation interact to spur or deter nuclear proliferation. Using a multiplex network model, we conceptualize states as nodes linked by different modes of interaction represented on individual network layers. Node strength is used to quantify factors correlated with nuclear proliferation and these are combined in a weighted sum across layers to provide a metric characterizing the proliferation behavior of the state. This multiplex network modeling approach provides a means for identifying states with the highest relative likelihood of proliferation—based only on their relationships to other states. This work demonstrates that latent conflict and nuclear cooperation are positively correlated with proliferation, while an increased trade dependence suggests a decreased proliferation likelihood. A case study on Iran’s controversial nuclear program and past nuclear activity is also provided. These findings have clear, policy-relevant conclusions related to alliance posture, sanctions policy, and nuclear assistance. Abstract ©The Authors

Intercontinental Movement of Highly Pathogenic Avian Influenza A(H5N1) Clade 2.3.4.4 Virus to the United States, 2021

We detected Eurasian-origin highly pathogenic avian influenza A(H5N1) virus belonging to the Gs/GD lineage, clade 2.3.4.4b, in wild waterfowl in 2 Atlantic coastal states in the United States. Bird banding data showed widespread movement of waterfowl within the Atlantic Flyway and between neighboring flyways and northern breeding grounds

Host Genes Related to Paneth Cells and Xenobiotic Metabolism Are Associated with Shifts in Human Ileum-Associated Microbial Composition

The aim of this study was to integrate human clinical, genotype, mRNA microarray and 16 S rRNA sequence data collected on 84 subjects with ileal Crohn’s disease, ulcerative colitis or control patients without inflammatory bowel diseases in order to interrogate how host-microbial interactions are perturbed in inflammatory bowel diseases (IBD). Ex-vivo ileal mucosal biopsies were collected from the disease unaffected proximal margin of the ileum resected from patients who were undergoing initial intestinal surgery. Both RNA and DNA were extracted from the mucosal biopsy samples. Patients were genotyped for the three major NOD2 variants (Leufs1007, R702W, and G908R) and the ATG16L1T300A variant. Whole human genome mRNA expression profiles were generated using Agilent microarrays. Microbial composition profiles were determined by 454 pyrosequencing of the V3–V5 hypervariable region of the bacterial 16 S rRNA gene. The results of permutation based multivariate analysis of variance and covariance (MANCOVA) support the hypothesis that host mucosal Paneth cell and xenobiotic metabolism genes play an important role in host microbial interactions

Analysis of Interactions of Salmonella Type Three Secretion Mutants with 3-D Intestinal Epithelial Cells

The prevailing paradigm of Salmonella enteropathogenesis based on monolayers asserts that Salmonella pathogenicity island-1 Type Three Secretion System (SPI-1 T3SS) is required for bacterial invasion into intestinal epithelium. However, little is known about the role of SPI-1 in mediating gastrointestinal disease in humans. Recently, SPI-1 deficient nontyphoidal Salmonella strains were isolated from infected humans and animals, indicating that SPI-1 is not required to cause enteropathogenesis and demonstrating the need for more in vivo-like models. Here, we utilized a previously characterized 3-D organotypic model of human intestinal epithelium to elucidate the role of all characterized Salmonella enterica T3SSs. Similar to in vivo reports, the Salmonella SPI-1 T3SS was not required to invade 3-D intestinal cells. Additionally, Salmonella strains carrying single (SPI-1 or SPI-2), double (SPI-1/2) and complete T3SS knockout (SPI-1/SPI-2: flhDC) also invaded 3-D intestinal cells to wildtype levels. Invasion of wildtype and TTSS mutants was a Salmonella active process, whereas non-invasive bacterial strains, bacterial size beads, and heat-killed Salmonella did not invade 3-D cells. Wildtype and T3SS mutants did not preferentially target different cell types identified within the 3-D intestinal aggregates, including M-cells/M-like cells, enterocytes, or Paneth cells. Moreover, each T3SS was necessary for substantial intracellular bacterial replication within 3-D cells. Collectively, these results indicate that T3SSs are dispensable for Salmonella invasion into highly differentiated 3-D models of human intestinal epithelial cells, but are required for intracellular bacterial growth, paralleling in vivo infection observations and demonstrating the utility of these models in predicting in vivo-like pathogenic mechanisms