6,260 research outputs found
Examination of coating failure by acoustic emission
Coatings of NiCrAlY bond coat with a zirconia - 12 wt percent yttria overlay were applied to disc-shaped specimens of U-700 alloy. A waveguide of 1 mm diameter platinum was TIG welded to the specimen and allowed it to be suspended in a tubular furnace. The specimen was thermally cycled to 1150 C, and the acoustic emission (AE) monitored. The weight gain per thermal cycle was also measured. A computer system based on the IBM-XT microcomputer was used extensively to acquire the AE data with respect to temperature. This system also controlled the temperature by using a PD software loop. Several different types of AE analyses were performed. A major feature of these tests, not addressed by previous work in this area, was that the coatings covered 100 percent of the specimen and also that the AE was amplified at two different levels. It is believed that this latter feature allows a qualitative appraisal of the relative number of cracks per AE event. The difference in AE counts between the two channels is proportional to the number of cracks per AE event, and this parameter may be thought of as the crack density. The ratio of the AE count difference to the AE count magnitude of one channel is inversely proportional to the crack growth. Both of these parameters allow the crack distribution and crack growth within each specimen to be qualitatively followed during the thermal cycling operation. Recent results which used these principles will be presented
Certain Integrals Arising from Ramanujan's Notebooks
In his third notebook, Ramanujan claims that In a following cryptic line, which
only became visible in a recent reproduction of Ramanujan's notebooks,
Ramanujan indicates that a similar relation exists if were replaced by
in the first integral and were inserted in the integrand of
the second integral. One of the goals of the present paper is to prove this
claim by contour integration. We further establish general theorems similarly
relating large classes of infinite integrals and illustrate these by several
examples
Mechanical behavior of thermal barrier coatings for gas turbine blades
Plasma-sprayed thermal barrier coatings (TBCs) will enable turbine components to operate at higher temperatures and lower cooling gas flow rates; thereby improving their efficiency. Future developments are limited by precise knowledge of the material properties and failure mechanisms of the coating system. Details of this nature are needed for realistic modeling of the coating system which will, in turn, promote advancements in coating technology. Complementary experiments and analytical modeling which were undertaken in order to define and measure the important failure processes for plasma-sprayed coatings are presented. The experimental portion includes two different tests which were developed to measure coating properties. These are termed tensile adhesion and acoustic emission tests. The analytical modeling section details a finite element method which was used to calculate the stress distribution in the coating system. Some preliminary results are presented
Performance of thermal barrier coatings in high heat flux environments
Thermal barrier coatings were exposed to the high temperature and high heat flux produced by a 30 kW plasma torch. Analysis of the specimen heating rates indicates that the temperature drop across the thickness of the 0.038 cm ceramic layer was about 1100 C after 0.5 sec in the flame. An as-sprayed ZrO2-8%Y2O3 specimens survived 3000 of the 0.5 sec cycles with failing. Surface spalling was observed when 2.5 sec cycles were employed but this was attributed to uneven heating caused by surface roughness. This surface spalling was prevented by smoothing the surface with silicon carbide paper or by laser glazing. A coated specimen with no surface modification but which was heat treated in argon also did not surface spall. Heat treatment in air led to spalling in as early as 2 cycle from heating stresses. Failures at edges were investigated and shown to be a minor source of concern. Ceramic coatings formed from ZrO2-12%Y2O3 or ZrO2-20%Y2O3 were shown to be unsuited for use under the high heat flux conditions of this study
Quantum Resonances and Ratchets in Free-Falling Frames
Quantum resonance (QR) is defined in the free-falling frame of the quantum
kicked particle subjected to gravity. The general QR conditions are derived.
They imply the rationality of the gravity parameter , the kicking-period
parameter , and the quasimomentum . Exact results are
obtained concerning wave-packet evolution for arbitrary periodic kicking
potentials in the case of integer (the main QRs). It is shown
that a quantum ratchet generally arises in this case for resonant . The
noninertial nature of the free-falling frame affects the ratchet by effectively
changing the kicking potential to one depending on . For a
simple class of initial wave packets, it is explicitly shown that the ratchet
characteristics are determined to a large extent by symmetry properties and by
number-theoretical features of .Comment: To appear in Physical Review E (Rapid Communications
Two-dimensional series evaluations via the elliptic functions of Ramanujan and Jacobi
We evaluate in closed form, for the first time, certain classes of double
series, which are remindful of lattice sums. Elliptic functions, singular
moduli, class invariants, and the Rogers--Ramanujan continued fraction play
central roles in our evaluationsComment: 12 page
q-Newton binomial: from Euler to Gauss
A counter-intuitive result of Gauss (formulae (1.6), (1.7) below) is made
less mysterious by virtue of being generalized through the introduction of an
additional parameter
Suppression of p-Wave Baryons in Quark Recombination
We show that the observed suppression of the ratio in
central Au + Au collisions at the Relativistic Heavy Ion Collider can be
naturally understood in the constituent quark recombination model.Comment: 3 pages, 1 figur
Kondo effect of a Co atom on Cu(111) in contact with an Fe tip
Single Co atoms, which exhibit a Kondo effect on Cu(111), are contacted with
Cu and Fe tips in a low-temperature scanning tunneling microscope. With Fe
tips, the Kondo effect persists with the Abrikosov-Suhl resonance significantly
broadened. In contrast, for Cu-covered W tips, the resonance width remains
almost constant throughout the tunneling and contact ranges. The distinct
changes of the line width are interpreted in terms of modifications of the Co d
state occupation owing to hybridization with the tip apex atoms.Comment: 4 pages, 3 figure
- …