11 research outputs found

    Effects of pretreatment on morphology, chemical composition and enzymatic digestibility of eucalyptus bark: a potentially valuable source of fermentable sugars for biofuel production - part 1

    Get PDF
    Background: In recent years, the growing demand for biofuels has encouraged the search for different sources of underutilized lignocellulosic feedstocks that are available in sufficient abundance to be used for sustainable biofuel production. Much attention has been focused on biomass fromgrass. However, large amounts of timber residues such as eucalyptus bark are available and represent a potential source for conversion to bioethanol. In the present paper, we investigate the effects of a delignification process with increasing sodium hydroxide concentrations, preceded or not by diluted acid, on the bark of two eucalyptus clones: Eucalyptus grandis (EG) and the hybrid, E. grandis x urophylla (HGU). The enzymatic digestibility and total cellulose conversion were measured, along with the effect on the composition of the solid and the liquor fractions. Barks were also assessed using Fourier-transform infrared spectroscopy (FTIR), solid-state nuclear magnetic resonance (NMR), X-Ray diffraction, and scanning electron microscopy (SEM). Results: Compositional analysis revealed an increase in the cellulose content, reaching around 81% and 76% of glucose for HGU and EG, respectively, using a two-step treatment with HCl 1%, followed by 4% NaOH. Lignin removal was 84% (HGU) and 79% (EG), while the hemicellulose removal was 95% and 97% for HGU and EG, respectively. However, when we applied a one-step treatment, with 4% NaOH, higher hydrolysis efficiencies were found after 48 h for both clones, reaching almost 100% for HGU and 80% for EG, in spite of the lower lignin and hemicellulose removal. Total cellulose conversion increased from 5% and 7% to around 65% for HGU and 59% for EG. NMR and FTIR provided important insight into the lignin and hemicellulose removal and SEM studies shed light on the cell-wall unstructuring after pretreatment and lignin migration and precipitation on the fibers surface, which explain the different hydrolysis rates found for the clones. Conclusion: Our results show that the single step alkaline pretreatment improves the enzymatic digestibility of Eucalyptus bark. Furthermore, the chemical and physical methods combined in this study provide a better comprehension of the pretreatment effects on cell-wall and the factors that influence enzymatic digestibility of this forest residue.FAPESP (10/11135-6, 09/18354-8, 10/08370-3, 08/56255-9, 10/52362-5)CNPq (159341/2011-6, 482166/2010-0, 490022/2009-0)European Community’s Seventh Framework Programme SUNLIBB (FP7/2007-2013)INCT do BioetanolNúcleo de Apoio à Pesquisa em Bioenergia e Sustentabilidade (NAPBS)Centro de Instrumentação para Estudos Avançados de Materiais Nanoestruturados e Biossistemas (CIEA_MNB

    Effects of pretreatment on morphology, chemical composition and enzymatic digestibility of eucalyptus bark: a potentially valuable source of fermentable sugars for biofuel production – part 1

    Get PDF
    Abstract\ud \ud \ud \ud Background\ud \ud In recent years, the growing demand for biofuels has encouraged the search for different sources of underutilized lignocellulosic feedstocks that are available in sufficient abundance to be used for sustainable biofuel production. Much attention has been focused on biomass from grass. However, large amounts of timber residues such as eucalyptus bark are available and represent a potential source for conversion to bioethanol. In the present paper, we investigate the effects of a delignification process with increasing sodium hydroxide concentrations, preceded or not by diluted acid, on the bark of two eucalyptus clones: Eucalyptus grandis (EG) and the hybrid, E. grandis x urophylla (HGU). The enzymatic digestibility and total cellulose conversion were measured, along with the effect on the composition of the solid and the liquor fractions. Barks were also assessed using Fourier-transform infrared spectroscopy (FTIR), solid-state nuclear magnetic resonance (NMR), X-Ray diffraction, and scanning electron microscopy (SEM).\ud \ud \ud \ud Results\ud \ud Compositional analysis revealed an increase in the cellulose content, reaching around 81% and 76% of glucose for HGU and EG, respectively, using a two-step treatment with HCl 1%, followed by 4% NaOH. Lignin removal was 84% (HGU) and 79% (EG), while the hemicellulose removal was 95% and 97% for HGU and EG, respectively. However, when we applied a one-step treatment, with 4% NaOH, higher hydrolysis efficiencies were found after 48 h for both clones, reaching almost 100% for HGU and 80% for EG, in spite of the lower lignin and hemicellulose removal. Total cellulose conversion increased from 5% and 7% to around 65% for HGU and 59% for EG. NMR and FTIR provided important insight into the lignin and hemicellulose removal and SEM studies shed light on the cell-wall unstructuring after pretreatment and lignin migration and precipitation on the fibers surface, which explain the different hydrolysis rates found for the clones.\ud \ud \ud \ud Conclusion\ud \ud Our results show that the single step alkaline pretreatment improves the enzymatic digestibility of Eucalyptus bark. Furthermore, the chemical and physical methods combined in this study provide a better comprehension of the pretreatment effects on cell-wall and the factors that influence enzymatic digestibility of this forest residue.The authors are grateful to FAPESP and CNPq for the financial support for this work via grants # 2010/11135-6; 2009/18354-8; 2010/08370-3; 2008/ 56255-9 and 2010/52362-5 (FAPESP); grants # 159341/2011-6; 482166/ 2010-0 and 490022/2009-0 (CNPq), Projeto INCT do Bioetanol (CNPq/ FAPESP), to USP for the financial via NAP Centro de Instrumentação para Estudos Avançados de Materiais Nanoestruturados e Biossistemas and NAP de Bioenergia e Sustentabilidade, and European Community’s Seventh Framework Programme SUNLIBB (FP7/2007-2013) under the grant agreement n° 251132. We are also grateful to Valeria Gazda for the help with furfural and 5-HMF chromatographic analysis and Caragh Whitehead for the paper review. The electron microscopy work has been performed on the microscopes JSM-5900LV and Quanta 650-FEG at LME/LNNano/ CNPEM, Campinas

    Using inulin‐based emulsion gels as fat substitute in salt reduced Bologna sausage

    No full text
    [Background]: A high‐fiber emulsion gel (EG) containing inulin, soy protein isolate, and soybean oil was applied as animal fat replacer in reduced salt and fat Bologna sausage containing mechanically deboned chicken meat, pork meat, and pork back fat. Technological and microbiological properties were evaluated for 60 days at 4 °C.[Results]: A reduction of 11 to 34% and 35 to 45% of fat and sodium were obtained in reformulated products, respectively. An increase in fiber content and polyunsaturated fatty acid was noticed in the formulations with EG. The addition of EG in Bologna increased L* (lightness) values and reduced a* (redness/greenness) values comparing to control treatment. Microstructural properties of sausages exhibited a denser network with the presence of EG. Softer, more elastic, cohesive and resilient samples with a higher intensity of lipid oxidation (P < 0.05) were observed in EG added sausages. The nuclear magnetic resonance (NMR) data shows that the presence of EG recovers the matrix that has been weakened due to reduction of fat and salt. Sensory evaluation showed that the incorporation of the EGs resulted in acceptable scores.[Conclusion]: These results suggest that inulin‐based EG is a potential fat substitute for developing healthier meat products, with better fatty acids composition and stable to chilled storage.The authors are thankful to CNPq (140 531/2015‐7), CAPES (140 531/2015‐7), and FAPESP (2016/19 967‐7) for providing financial support and scholarships that sustained this study.Peer reviewe

    Using inulin‐based emulsion gels as fat substitute in salt reduced Bologna sausage

    No full text
    [Background]: A high‐fiber emulsion gel (EG) containing inulin, soy protein isolate, and soybean oil was applied as animal fat replacer in reduced salt and fat Bologna sausage containing mechanically deboned chicken meat, pork meat, and pork back fat. Technological and microbiological properties were evaluated for 60 days at 4 °C.[Results]: A reduction of 11 to 34% and 35 to 45% of fat and sodium were obtained in reformulated products, respectively. An increase in fiber content and polyunsaturated fatty acid was noticed in the formulations with EG. The addition of EG in Bologna increased L* (lightness) values and reduced a* (redness/greenness) values comparing to control treatment. Microstructural properties of sausages exhibited a denser network with the presence of EG. Softer, more elastic, cohesive and resilient samples with a higher intensity of lipid oxidation (P < 0.05) were observed in EG added sausages. The nuclear magnetic resonance (NMR) data shows that the presence of EG recovers the matrix that has been weakened due to reduction of fat and salt. Sensory evaluation showed that the incorporation of the EGs resulted in acceptable scores.[Conclusion]: These results suggest that inulin‐based EG is a potential fat substitute for developing healthier meat products, with better fatty acids composition and stable to chilled storage.The authors are thankful to CNPq (140 531/2015‐7), CAPES (140 531/2015‐7), and FAPESP (2016/19 967‐7) for providing financial support and scholarships that sustained this study.Peer reviewe

    Evaluating the composition and processing potential of novel sources of Brazilian biomass for sustainable biorenewables production

    No full text
    Abstract Background The search for promising and renewable sources of carbohydrates for the production of biofuels and other biorenewables has been stimulated by an increase in global energy demand in the face of growing concern over greenhouse gas emissions and fuel security. In particular, interest has focused on non-food lignocellulosic biomass as a potential source of abundant and sustainable feedstock for biorefineries. Here we investigate the potential of three Brazilian grasses (Panicum maximum, Pennisetum purpureum and Brachiaria brizantha), as well as bark residues from the harvesting of two commercial Eucalyptus clones (E. grandis and E. grandis x urophylla) for biofuel production, and compare these to sugarcane bagasse. The effects of hot water, acid, alkaline and sulfite pretreatments (at increasing temperatures) on the chemical composition, morphology and saccharification yields of these different biomass types were evaluated. Results The average yield (per hectare), availability and general composition of all five biomasses were compared. Compositional analyses indicate a high level of hemicellulose and lignin removal in all grass varieties (including sugarcane bagasse) after acid and alkaline pretreatment with increasing temperatures, whilst the biomasses pretreated with hot water or sulfite showed little variation from the control. For all biomasses, higher cellulose enrichment resulted from treatment with sodium hydroxide at 130°C. At 180°C, a decrease in cellulose content was observed, which is associated with high amorphous cellulose removal and 5-hydroxymethyl-furaldehyde production. Morphological analysis showed the effects of different pretreatments on the biomass surface, revealing a high production of microfibrillated cellulose on grass surfaces, after treatment with 1% sodium hydroxide at 130°C for 30 minutes. This may explain the higher hydrolysis yields resulting from these pretreatments, since these cellulosic nanoparticles can be easily accessed and cleaved by cellulases. Conclusion Our results show the potential of three Brazilian grasses with high productivity yields as valuable sources of carbohydrates for ethanol production and other biomaterials. Sodium hydroxide at 130°C was found to be the most effective pretreatment for enhanced saccharification yields. It was also efficient in the production of microfibrillated cellulose on grass surfaces, thereby revealing their potential as a source of natural fillers used for bionanocomposites production

    Effects of pretreatment on morphology, chemical composition and enzymatic digestibility of eucalyptus bark: a potentially valuable source of fermentable sugars for biofuel production – part 1

    No full text
    Abstract Background In recent years, the growing demand for biofuels has encouraged the search for different sources of underutilized lignocellulosic feedstocks that are available in sufficient abundance to be used for sustainable biofuel production. Much attention has been focused on biomass from grass. However, large amounts of timber residues such as eucalyptus bark are available and represent a potential source for conversion to bioethanol. In the present paper, we investigate the effects of a delignification process with increasing sodium hydroxide concentrations, preceded or not by diluted acid, on the bark of two eucalyptus clones: Eucalyptus grandis (EG) and the hybrid, E. grandis x urophylla (HGU). The enzymatic digestibility and total cellulose conversion were measured, along with the effect on the composition of the solid and the liquor fractions. Barks were also assessed using Fourier-transform infrared spectroscopy (FTIR), solid-state nuclear magnetic resonance (NMR), X-Ray diffraction, and scanning electron microscopy (SEM). Results Compositional analysis revealed an increase in the cellulose content, reaching around 81% and 76% of glucose for HGU and EG, respectively, using a two-step treatment with HCl 1%, followed by 4% NaOH. Lignin removal was 84% (HGU) and 79% (EG), while the hemicellulose removal was 95% and 97% for HGU and EG, respectively. However, when we applied a one-step treatment, with 4% NaOH, higher hydrolysis efficiencies were found after 48 h for both clones, reaching almost 100% for HGU and 80% for EG, in spite of the lower lignin and hemicellulose removal. Total cellulose conversion increased from 5% and 7% to around 65% for HGU and 59% for EG. NMR and FTIR provided important insight into the lignin and hemicellulose removal and SEM studies shed light on the cell-wall unstructuring after pretreatment and lignin migration and precipitation on the fibers surface, which explain the different hydrolysis rates found for the clones. Conclusion Our results show that the single step alkaline pretreatment improves the enzymatic digestibility of Eucalyptus bark. Furthermore, the chemical and physical methods combined in this study provide a better comprehension of the pretreatment effects on cell-wall and the factors that influence enzymatic digestibility of this forest residue

    Inulin gelled emulsion as a fat replacer and fiber carrier in healthier Bologna sausage

    No full text
    The effects of gelled emulsions (GE) used as animal fat replacers in terms of the nutritional, technological, and sensory properties of Bologna sausages during 60 days of chilled storage have been studied. Samples with GE added exhibited a fat reduction of 31%. Sausages with GE had higher values of L* and lower values of a* compared to the control. Harder sausages were obtained by the addition of GE. Higher lipid oxidation rates were found with increasing amounts of GE in the reformulated products. In addition, the relaxation time was not affected by the reformulation. All samples were deemed acceptable by consumer tests. However, CATA (Check-all-that-apply) tests showed that Bolognas formulated with partial or total pork fat replaced with GE were described as rubbery, not very spicy and firm, appeared to be dry and opaque, and had an aftertaste. Chilled storage significantly affected the Thiobarbituric Acid Reactive Substances (TBARS) values and slightly affected the pH values, texture, color, and NMR data. An important result is that the panelists did not detect the oxidation results in relation to the TBARS values, and the addition of a GE with inulin as dietary fiber may be a good strategy to make Bologna sausage healthier.Peer reviewe

    sj-pdf-1-fst-10.1177_1082013220980586 - Supplemental material for Inulin gelled emulsion as a fat replacer and fiber carrier in healthier Bologna sausage

    No full text
    Supplemental material, sj-pdf-1-fst-10.1177_1082013220980586 for Inulin gelled emulsion as a fat replacer and fiber carrier in healthier Bologna sausage by Camila de Souza Paglarini, Vitor Andre Silva Vidal, Maristela Midori Ozaki, Ana Paula Badan Ribeiro, Oigres Daniel Bernardinelli, Ana Karoline Ferreira Ignácio Câmara, Ana M Herrero, Claudia Ruiz-Capillas, Edvaldo Sabadini and Marise Aparecida Rodrigues Pollonio in Food Science and Technology International.Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorPeer reviewe
    corecore