Models of Social Groups in Blogosphere Based on Information about Comment Addressees and Sentiments

This work concerns the analysis of number, sizes and other characteristics of groups identified in the blogosphere using a set of models identifying social relations. These models differ regarding identification of social relations, influenced by methods of classifying the addressee of the comments (they are either the post author or the author of a comment on which this comment is directly addressing) and by a sentiment calculated for comments considering the statistics of words present and connotation. The state of a selected blog portal was analyzed in sequential, partly overlapping time intervals. Groups in each interval were identified using a version of the CPM algorithm, on the basis of them, stable groups, existing for at least a minimal assumed duration of time, were identified.Comment: Gliwa B., Ko\'zlak J., Zygmunt A., Models of Social Groups in Blogosphere Based on Information about Comment Addressees and Sentiments, in the K. Aberer et al. (Eds.): SocInfo 2012, LNCS 7710, pp. 475-488, Best Paper Awar

Application of Sentinel-2A data for pasture biomass monitoring using a physically based radiative transfer model

A large proportion of the global land surface is covered by pasture. The advent of the Sentinel satellites program provides free datasets with good spatiotemporal resolution that can be a valuable source of information for monitoring pasture resources. We combined optical remote sensing data (proximal hyperspectral and Sentinel 2A) with a radiative transfer model (PROSAIL) to estimate leaf area index (LAI), and biomass, in a dairy farming context. Three sites in Southern England were used: two pasture farms that differed in pasture type and management, and a set of small agronomy trial plots with different mixtures of grasses, legumes and herbs, as well as pure perennial ryegrass. The proximal and satellite spectral data were used to retrieve LAI via PROSAIL model inversion, which were compared against field observations of LAI. The potential of bands of Sentinel 2A that corresponded with a 10 m resolution was studied by convolving narrow spectral bands (from a handheld hyperspectral sensor) into Sentinel 2A bands (10 m). Retrieved LAI, using these spectrally resampled S2A data, compared well with measured LAI, for all sites, even for those with mixed species cover (although retrieved LAI was somewhat overestimated for pasture mixtures with high LAI). This proved the suitability of 10 m Sentinel 2A spectral bands for capturing LAI dynamics for different types of pastures. We also found that inclusion of 20 m bands in the inversion scheme did not lead to any further improvement in retrieved LAI. Sentinel 2A image based retrieval yielded good agreement with LAI measurements obtained for a typical perennial ryegrass based pasture farm. LAI retrieved in this way was used to create biomass maps (that correspond to indirect biomass measurements by Rising Plate Meter (RPM)), for mixed-species paddocks for a farm for which limited field data were available. These maps compared moderately well with farmer-collected RPM measurements for this farm. We propose that estimates of paddock-averaged and within-paddock variability of biomass are more reliably obtained from a combined Sentinel 2A-PROSAIL approach, rather than by manual RPM measurements. The physically based radiative transfer model inversion approach outperformed the Normalised Difference Vegetation Index based retrieval method, and does not require site specific calibrations of the inversion scheme

Modelling of co-rotating twin-screw extruders in the pharmaceutical industry I : single component model

Twin-screw extruders are being increasingly applied in the pharmaceutical industry for the manufacture of solid dispersions. In particular, Hot Melt Extrusion (HME) is a viable manufacturing alternative for poorly soluble drugs that are difficult to process. This is due to the high shear stress applied in the process, which enhances mixing of the base polymer with the dispersed API. Delivery systems that can be obtained using this technology include pellets, granules, sustained release tablets and implants. Experiments for HME are typically very labour-intensive, involving the use of highly viscous polymers, high pressures, and require proper cleaning between runs. Identifying the critical experiments to perform based on model simulations would thus be highly desirable. Single-component modelling of twin-screw extrusion processes could be beneficial in the following areas: identifying optimal screw configurations, tracking the degree of melting and when identifying the area within the extruder where the polymer becomes completely melted

The Environmental Context and Function of Burnt-Mounds : New Studies of Irish Fulachtaí Fiadh

The authors acknowledge funding from The Leverhulme Trust (F/00144/AI) and assistance from a large number of individuals including; Margaret Gowen (access to sites and assistance throughout),A. Ames, H, Essex (pollen processing), S. Rouillard & R. Smith (illustrations), C. McDermott, S. Bergerbrandt, all the staff of Margaret Gowen & Co. Ltd, TVAS Ireland and CRDS. Excavation works and some post-excavation analysis was paid for my Bord Gáis and the National Roads Authority (now Transport Infrastructure Ireland). Thanks also to David Smith for access to the Maureen Girling collection and assistance with identifications.Peer reviewedPostprintPostprin

Randomised controlled trial and health economic evaluation of the impact of diagnostic testing for influenza, respiratory syncytial virus and Streptococcus pneumoniae infection on the management of acute admissions in the elderly and high-risk 18- to 64-year-olds

Please cite the published version which is available via the DOI link in this record.Western industrialised nations face a large increase in the number of older people. People over the age of 60 years account for almost half of the 16.8 million hospital admissions in England from 2009 to 2010. During 2009-10, respiratory infections accounted for approximately 1 in 30 hospital admissions and 1 in 20 of the 51.5 million bed-days.HTA ProgrammeNational Institute for Health Research (NIHR

The environmental context and function of Burnt-Mounds: new studies of Irish Fulachtaí Fiadh

Burnt mounds, or fulachtaí fiadh as they are known in Ireland, are probably the most common prehistoric site type in Ireland and Britain. Typically Middle–Late Bronze Age in age (although both earlier and later examples are known), they are artefact-poor and rarely associated with settlements. The function of these sites has been much debated with the most commonly cited uses being for cooking, as steam baths or saunas, for brewing, tanning, or textile processing. A number of major infrastructural development schemes in Ireland in the years 2002–2007 revealed remarkable numbers of these mounds often associated with wood-lined troughs, many of which were extremely well-preserved. This afforded an opportunity to investigate them as landscape features using environmental techniques – specifically plant macrofossils and charcoal, pollen, beetles, and multi-element analyses. This paper summarises the results from eight sites from Ireland and compares them with burnt mound sites in Great Britain. The fulachtaí fiadh which are generally in clusters, are all groundwater-fed by springs, along floodplains and at the bases of slopes. The sites are associated with the clearance of wet woodland for fuel; most had evidence of nearby agriculture and all revealed low levels of grazing. Multi-element analysis at two sites revealed elevated heavy metal concentrations suggesting that off-site soil, ash or urine had been used in the trough. Overall the evidence suggests that the most likely function for these sites is textile production involving both cleaning and/or dyeing of wool and/or natural plant fibres and as a functionally related activity to hide cleaning and tanning. Whilst further research is clearly needed to confirm if fulachtaí fiadh are part of the ‘textile revolution’ we should also recognise their important role in the rapid deforestation of the wetter parts of primary woodland and the expansion of agriculture into marginal areas during the Irish and British Bronze Ages

Effects of zinc on leaf decomposition by fungi in streams : studies in microcosms

The effect of zinc on leaf decomposition by aquatic fungi was studied in microcosms. Alder leaf disks were precolonized for 15 days at the source of the Este River, and exposed to different zinc concentrations during 25 days. Leaf mass loss, fungal biomass (based on ergosterol concentration), fungal production (rates of [1-14C]acetate incorporation into ergosterol), sporulation rates and species richness of aquatic hyphomycetes were determined. At the source of the Este River decomposition of alder leaves was fast and 50% of the initial mass was lost in 25 days. A total of 18 aquatic hyphomycete species were recorded during 42 days of leaf immersion. Articulospora tetracladia was the dominant species, followed by Lunulospora curvula and two unidentified species with sigmoid conidia. Cluster analysis suggested that zinc concentration and exposure time affected the structure of aquatic hyphomycete assemblages, even though richness had not been severely affected. Both zinc concentration and exposure time significantly affected leaf mass loss, fungal production and sporulation, but not fungal biomass. Zinc exposure reduced leaf mass loss, inhibited fungal production and affected fungal reproduction by either stimulating or inhibiting sporulation rates. The results of this work suggested zinc pollution might depress leaf decomposition in streams due to changes in the structure and activity of aquatic fungi.Fundação para a Ciência e a Tecnologia (FCT) – Programa Operacional “Ciência, Tecnologia, Inovação” (POCTI) - POCTI/34024/BSE/2000

A preliminary study of genetic factors that influence susceptibility to bovine tuberculosis in the British cattle herd

Associations between specific host genes and susceptibility to Mycobacterial infections such as tuberculosis have been reported in several species. Bovine tuberculosis (bTB) impacts greatly the UK cattle industry, yet genetic predispositions have yet to be identified. We therefore used a candidate gene approach to study 384 cattle of which 160 had reacted positively to an antigenic skin test (‘reactors’). Our approach was unusual in that it used microsatellite markers, embraced high breed diversity and focused particularly on detecting genes showing heterozygote advantage, a mode of action often overlooked in SNP-based studies. A panel of neutral markers was used to control for population substructure and using a general linear model-based approach we were also able to control for age. We found that substructure was surprisingly weak and identified two genomic regions that were strongly associated with reactor status, identified by markers INRA111 and BMS2753. In general the strength of association detected tended to vary depending on whether age was included in the model. At INRA111 a single genotype appears strongly protective with an overall odds ratio of 2.2, the effect being consistent across nine diverse breeds. Our results suggest that breeding strategies could be devised that would appreciably increase genetic resistance of cattle to bTB (strictly, reduce the frequency of incidence of reactors) with implications for the current debate concerning badger-culling

Kinase/phosphatase overexpression reveals pathways regulating hippocampal neuron morphology

Kinases and phosphatases that regulate neurite number versus branching versus extension are weakly correlated.The kinase family that most strongly enhances neurite growth is a family of non-protein kinases; sugar kinases related to NADK.Pathway analysis revealed that genes in several cancer pathways were highly active in enhancing neurite growth