Persistent organochlorine compounds in fetal and maternal tissues: evaluation of their potential influence on several indicators of fetal growth and health

Some organochlorine compounds, such as polychlorinated biphenyls (PCBs), have a tendency to bioaccumulate in humans and predators at the top of the food chain. We have recently confirmed the transplacental transfer of these compounds and the present study has been designed on the same material with the aim of investigating their potential health effects on newborns from 70 pregnant women, resident in a Northern Italy industrial town. Organochlorine compounds [namely, p,p'-dichlorodiphenyltrichloroethane (p,p'-DDT), p,p'-dichlorodiphenyldichloroethene (p,p'-DDE), hexachlorobenzene (HCB), and PCBs] have been analyzed both in cord and maternal serum, placenta, and maternal subcutaneous adipose tissue by GC-MSD. p,p'-DDT levels in the adipose tissue resulted significantly (p<0.05) related to birth length. Mothers of neonates born by preterm programmed caesarean delivery showed significantly (p<0.005 for both) higher serum p,p'-DDE serum concentrations and p,p'-DDT levels in the adipose tissue, as compared to mothers delivering at term

Rapid chemical analysis and antiprotozoal effect of the solvent extracts and the essential oil of Artemisia indica

Artemisia indica is used as antipyretic in malarial fevers during malaria outbreaks in India [1]. We selected this plant because reports concerning the presence of artemisinin is contradictory, the content of methoxyflavonoids that potentiate the antimalarial efficacy of artemisinin has remained unstudied and the essential oil of the plant from different regions shows great chemical variations. Solvent extracts [petroleum ether, n-hexane, dichloromethane, acetone, MeOH or EtOH (96, 80 or 60% v/v), and hot water] of A. indica leaves originated from the West Bengal region (India) were assessed by HPLC-DAD and HPLC-MS for the content of artemisinin and the characteristic Artemisia methoxyflavonoids, eupatin, casticin, chrysoplenetin, cirsilineol, chrysosphenol-D and artemetin. None of the extracts contained artemisinin or the methoxyflavonoids chrysosphenol-D and artemetin, while all extracts contained chrysoplenetin. Eupatin, casticin and cirsilineol were found in all extracts except for the p. ether, n-hexane and hot water infusion. The acetone and EtOH extracts contained the highest levels of polymethoxyflavonoids (1.15 – 1.17%), whereas the infusion was devoid of them. The essential oil of the plant was obtained by hydrodistillation and analyzed by GC and GC-MS simultaneously. Of the 92 compounds detected in the oil, camphor (13.0%) and caryophyllene oxide (10.87%) were the major components. All solvent extracts and the volatile oil showed in vitro antimalarial activity (1.8 – 20 µg/mL). Except for the infusion, all extracts were also active against other parasitic protozoa (Trypanosoma b. rhodesiense, T. cruzi, Leishmania donovani). This is the first study investigating both artemisinin and polymethoxyflavonoid content and detailed in vitro antiprotozoal potential of A. indica extracts and the essential oil

Bionics-based surgical training using 3D printed photopolymers and smart devices

Additive manufacturing technologies support the realization of surgical training devices using, typically, photopolymers-based materials. Unfortunately, the material jetting family, able to print a large range of soft and hard polymers, requires expensive machines and materials, which are not always available. On the other hand, vat polymerization fails in the resolution/volume ratio and in the mechanical properties reconstruction. Stereolithographic 3D printers, mostly used in dental surgery, make possible to realize cheap and sustainable models for training activity using only one material, reducing the possibility to obtain different mechanical characteristics. Moreover, the printed objects have to be treated (i.e. curing post-processing) in order to obtain the required performances, that could be preserved for long term storing. The aim of the proposed approach is to assure the surgeons' skills improvement through bionic-based surgical 3D printed models and smart devices, able to reproduce the same perception of a real surgical activity. We demonstrated how it is possible develop smart devices capable to take into account the same characteristics of different materials (i.e. bone and spongy bone) even if stored for a long time

Long-term survival of stage I multiple myeloma given chemotherapy just after diagnosis or at progression of the disease: a multicentre randomized study

We conducted a randomized trial to evaluate whether melphalan-prednisone (MPH-P) treatment administered just after diagnosis improves survival of stage I multiple myeloma (MM). Between January 1987 and March 1993, 145 consecutive previously untreated patients with stage I MM were randomized between treatment with MPH-P (administered for 4 days every 6 weeks) just after diagnosis and treatment only at disease progression. Survival was not influenced by MPH-P treatment either administered just after diagnosis or at disease progression (64 vs 71 months respectively). Comparing the first with the second group the odds ratio of death is 1.17 (95% confidence interval 0.57–2.42;P = 0.64). Disease progression occurred within a year in about 50% of patients who were initially untreated. Response rate was similar in both groups, but duration of response was shorter in patients who were treated at disease progression (48 vs 79 months, P = 0.044). Patients actually treated at disease progression (34/70) survived shorter than those who had neither disease progression nor treatment (56 vs > 92 months;P = 0.005). Starting MPH-P just after diagnosis does not improve survival and response rate in stage I MM, with respect to deferring therapy until disease progression. However, patients with stage I MM randomized to have treatment delayed and who actually progressed and were treated had shorter survival than those with stable disease and no treatment. Biologic or other disease features could identify these subgroups of patients. © 2000 Cancer Research Campaig

3D printed masks for powders and viruses safety protection using food grade polymers: Empirical tests

The production of 3D printed safety protection devices (SPD) requires particular attention to the material selection and to the evaluation of mechanical resistance, biological safety and surface roughness related to the accumulation of bacteria and viruses. We explored the possibility to adopt additive manufacturing technologies for the production of respirator masks, responding to the sudden demand of SPDs caused by the emergency scenario of the pandemic spread of SARS‐COV‐ 2. In this study, we developed different prototypes of masks, exclusively applying basic additive manufacturing technologies like fused deposition modeling (FDM) and droplet‐based precision extrusion deposition (db‐PED) to common food packaging materials. We analyzed the resulting mechanical characteristics, biological safety (cell adhesion and viability), surface roughness and resistance to dissolution, before and after the cleaning and disinfection phases. We showed that masks 3D printed with home‐grade printing equipment have similar performances compared to the industrial‐grade ones, and furthermore we obtained a perfect face fit by customizing their shape. Finally, we developed novel approaches to the additive manufacturing post‐processing phases essential to assure human safety in the production of 3D printed custom medical devices

Distant echoes: evoking the soundscapes of the past in the radio documentary series Noise: a human history

This article asks whether radio can ever successfully evoke an accurate sense of the sound of the past. It does so through a reflective critical analysis of the 2013 BBC Radio 4 documentary series, Noise: A Human History, by its own writer and presenter. It explores how the ‘sound design’ of the series met the challenge of providing a longue durée history of sound without having recourse to authentic sound archive recordings for most of the period being covered. Through an analysis of key sequences, and by highlighting the significance of the broader context of production, it argues that it is possible for epistemologically valuable history to emerge, even via a medium that treats sound more as a device for evoking the imagination than as something possessing evidential status in itself. The article does this by invoking the series as a practical example of ‘historical acoustemology’, and by suggesting that in radio notions of subjectivity and perceptual mimesis are key to understanding the medium's success. In doing so, the article calls for a redefinition of the notion of the radiogenic – arguing for a move away from seeing ‘raw’ sound as the key ingredient of sound design, and towards greater attention to the influence of radio's other characteristics as a time-based, institutionally-produced mass medium

‘Savage times come again’ : Morel, Wells, and the African Soldier, c.1885-1920

The African soldier trained in western combat was a figure of fear and revulsion in the late nineteenth and early twentieth centuries. My article examines representations of African soldiers in nonfictional writings by E.D. Morel about the Congo Free State (1885-1908), the same author’s reportage on African troops in post-First World War Germany, and H.G. Wells’s speculative fiction When the Sleeper Wakes (1899, 1910). In each text racist and anti-colonialist discourses converge in representing the African soldier as the henchman of corrupt imperialism. His alleged propensity for taboo crimes of cannibalism and rape are conceived as threats to white safety and indeed supremacy. By tracing Wells’s connections to the Congo reform campaign and situating his novel between two phases of Morel’s writing career, I interpret When the Sleeper Wakes as neither simply a reflection of past events in Africa or as a prediction of future ones in Europe. It is rather a transcultural text which reveals the impact of European culture upon the ‘Congo atrocities’, and the inscription of this controversy upon European popular cultural forms and social debates