Lime stabilisation for earthworks: a UK perspective

Lime stabilisation is a versatile technique applied during earthworks operations. Modern soil recycling units are much more efficient at pulverising fill material and intermixing the added binder/water than machinery available 20 years ago. While supplier innovation adds flexibility to the site working method, specifications have not been sufficiently updated to permit optimal application. This review paper details the physico-chemical changes instigated through the lime-clay soil reaction, updating previous reviews. It aims to assist scientific debate, current practitioners and future specification changes. For example, the application of the minimum 24 h mellowing periods (mandatory to UK specifications) with high reactivity, quicklime powders is concluded to cause increased air voids in the compacted fill. Increased air voids are associated with reduced long-term strength and potential volume change from water ingress, which is of particular concern for sulfate swelling. Shorter mellowing periods and/or use of hydrated lime may lesson this issue; however, a 'one size fits all' approach is discouraged in preference to site-specific methodologies refined to suit the fill material and project requirements. The discussion also summarises working methods which may lower the risk of sulfate swell and defines areas requiring further practical research

Bearing capacity charts of soft soil reinforced by deep mixing

A series of preliminary design charts were developed to predict the bearing capacity of fully and partially penetrated deep mixing (DM) of soft soil. The charts were produced by a new numerical analysis tool based on discontinuity layout optimisation (DLO) in which a previously proposed homogenisation method was used to define the improvement area. To measure the applicability of implementation of the homogenisation method in the DLO, a series of validation processes was performed against several previous studies under uniform soil strength. A new empirical solution was developed from the DLO method using the homogenisation method for the bearing capacity of soft ground under uniform soil strength, improved by the fully penetrated DM method. Results produced by the DLO approach were compared with existing analytical solutions and better agreement was found from the present model. The charts consider variation in improvement area ratio, column length and strength, and foundation width for the fully and partially penetrated DM cases. The simulations were related to real field cases in which the strength characteristics of soft soil increase with depth. An example is given to demonstrate use of the charts