Fiber-top atomic force microscope

We present the implementation of an atomic force microscope (AFM) based on fiber-top design. Our results demonstrate that the performances of fiber-top AFMs in contact mode are comparable to those of similar commercially available instruments. Our device thus represents an interesting\ud alternative to existing AFMs, particularly for applications outside specialized research laboratories, where a compact, user-friendly, and versatile tool might often be preferred

Capillary origami of micro-machined micro-objects: Bi-layer conductive hinges

Recently, we demonstrated controllable 3D self-folding by means of capillary forces of silicon-nitride micro-objects made of rigid plates connected to each other by flexible hinges [1]. In this paper, we introduce platinum electrodes running from the substrate to the plates over these bendable hinges. The fabrication yield is as high as (77 +/- 2) % for hinges with a length less than 75 {\mu}m. The yield reduces to (18 +/- 2) % when the length increases above 100 {\mu}m. Most of the failures in conductivity are due to degradation of the platinum/chromium layer stack during the final plasma cleaning step. The bi-layer hinges survive the capillary folding process, even for extremely small bending radii of 5 {\mu}m, nor does the bending have any impact on the conductivity. Stress in the different layers deforms the hinges, which does not affect the conductivity. Once assembled, the conductive hinges can withstand a current density of (1.6 +/- 0.4) $10^6$ A/cm$^2$ . This introduction of conductive electrodes to elastocapillary self-folded silicon-based micro-objects extends the range of their possible applications by allowing an electronic functionality of the folded parts.Comment: Currently on a peer review process. 13 page

Elastocapillary folding using stop-programmable hinges fabricated by 3D micro-machining

We show elasto-capillary folding of silicon nitride objects with accurate folding angles between flaps of 70.6$\pm$0.1{\deg} and demonstrate the feasibility of such accurate micro-assembly with a final folding angle of 90{\deg}. The folding angle is defined by stop-programmable hinges that are fabricated starting from silicon molds employing accurate three-dimensional corner lithography. This nano-patterning method exploits the conformal deposition and the subsequent timed isotropic etching of a thin film in a 3D shaped silicon template. The technique leaves a residue of the thin film in sharp concave corners which can be used as an inversion mask in subsequent steps. Hinges designed to stop the folding at 70.6{\deg} were fabricated batchwise by machining the V-grooves obtained by KOH etching in (110) silicon wafers; 90{\deg} stop-programmable hinges were obtained starting from silicon molds obtained by dry etching on (100) wafers. The presented technique is applicable to any folding angle and opens a new route towards creating structures with increased complexity, which will ultimately lead to a novel method for device fabrication.Comment: Submitted to a peer reviewed journa

Mechanical tuning of optical race-track ring resonators

This paper presents the fabrication and mechanical characterization of electrostatically actuated micro bimorphs integrated with race-track ring resonators, for optical tuning applications. The bimorphs, having an upward deflection in the off-state, are integrated by surface micromachining techniques with race-track ring resonators fabricated on Silicon On Insulator (SOI) wafers. Using electrostatic actuation, these bimorphs are pulled into the evanescent field of the ring resonator thereby modulating the propagation properties. Pull-in voltages of the bimorphs have been measured statically and the effect of electrostatic spring softening (ESS) on the resonance frequency has been measured dynamically. The resonance wavelength of the optical ring resonator could be tuned by 50 pm by applying an 8.5 V DC voltage to a 40 μm long bimorph, bringing it into close proximity of the ring resonator waveguide. To the best of our knowledge, this is the first experimental demonstration of tuning of race track ring resonators by integrated, electrostatically actuated bimorphs.\ud \u

The Price of Land and the Process of Expropriation

This paper applies a game theoretic model to situations in which the Dutch government expropriates land from some farmers in order to create a new public project. The model is a version of a finite period bargaining model with asymmetric information and one-sided offers. It is shown that the model can explain some casual observations as the fact that usually, but not always, the government and the farmers settle by agreement

Violent Intermediaries and Political Order in Bangladesh

The need for intermediaries to access resources, seek opportunities and mitigate risks has been observed in societies across the world. In poor people’s lives such actors are often violent, however why this is the case remains under examined. This article offers a response to this question from Bangladesh based on an understanding of political order. When violence is not consolidated by a central state, political order stems from balancing the interests of diverse violence specialists dispersed throughout society. In such contexts mediating access to resources can be a means by which these actors accrue power and wealth, helping explain the link between intermediation and violence. This argument is developed through an ethnographic case of labourers in a large bazar at the centre of Dhaka city. The case illuminates the dynamics of political factionalism and violent mobilization within a fractious period in Bangladesh’s recent history