Aperiodic Array Synthesis for Multi-User MIMO Applications

This paper demonstrates the advantages of aperiodic arrays in multi-user multiple-input multiple-output systems for future mobile communication applications. We propose a novel aperiodic array synthesis method which account for the statistics of the propagation channel and the adaptive beamforming algorithm. Clear performance gains in line-of-sight dominated propagation environments are achieved in terms of the signal-to-interference-plus-noise ratio, the sum rate capacity, as well as the spread of the amplifier output power as compared to their regular counterparts. We also show that the performance is not sacrificed in rich scattering environments. Hence, aperiodic array layouts can provide performance gains in millimeter-wave applications with a dominating line-of-sight component.Comment: Manuscript submitted to IEEE Trans. Antennas Propag. on March 18, 2017; published and defended as part of the PhD dissertation Aperiodic Array Synthesis for Telecommunications on May 31, 2017, Goteborg, Sweden, candidate: Carlo Bencivenni, Chalmers University of Technology, faculty opponent: Andrea Massa, ELEDIA cente

A glass spark counter for high rate environments

The performance of a glass spark counter prototype, built with glass electrodes of about 1010 Ω cm volume resistivity, is described. The measure

u-RANIA: a neutron detector based on \mu -RWELL technology

In the framework of the ATTRACT-uRANIA project, funded by the European Community, we are developing an innovative neutron imaging detector based on micro-Resistive WELL ($\mu$ -RWELL) technology. The $\mu$ -RWELL, based on the resistive detector concept, ensuring an efficient spark quenching mechanism, is a highly reliable device. It is composed by two main elements: a readout-PCB and a cathode. The amplification stage for this device is embedded in the readout board through a resistive layer realized by means of an industrial process with DLC (Diamond-Like Carbon). A thin layer of B$_4$C on the copper surface of the cathode allows the thermal neutrons detection through the release of $^7$Li and $\alpha$ particles in the active volume. This technology has been developed to be an efficient and convenient alternative to the $^3$He shortage. The goal of the project is to prove the feasibility of such a novel neutron detector by developing and testing small planar prototypes with readout boards suitably segmented with strip or pad read out, equipped with existing electronics or readout in current mode. Preliminary results from the test with different prototypes, showing a good agreement with the simulation, will be presented together with construction details of the prototypes and the future steps of the project.Comment: Prepared for the INSTR20 Conference Proceeding for JINS

High-resolution tracking in a GEM-Emulsion detector

SHiP (Search for Hidden Particles) is a beam dump experiment proposed at the CERN SPS aiming at the observation of long lived particles very weakly coupled with ordinary matter mostly produced in the decay of charmed hadrons. The beam dump facility of SHiP is also a copious factory of neutrinos of all three kinds and therefore a dedicated neutrino detector is foreseen in the SHiP apparatus. The neutrino detector exploits the Emulsion Cloud Chamber technique with a modular structure, alternating walls of target units and planes of electronic detectors providing the time stamp to the event. GEM detectors are one of the possible choices for this task. This paper reports the results of the first exposure to a muon beam at CERN of a new hybrid chamber, obtained by coupling a GEM chamber and an emulsion detector. Thanks to the micrometric accuracy of the emulsion detector, the position resolution of the GEM chamber as a function of the particle inclination was evaluated in two configurations, with and without the magnetic fiel

Synthesis of Atropisomeric Hydrazides by One-Pot Sequential Enantio- and Diastereoselective Catalysis

The first catalytic enantioselective and diastereoselective synthesis of atropisomeric hydrazides was achieved using a sequential catalysis protocol. This strategy is based on a one-pot sequence of two organocatalytic cycles featuring the enamine amination of branched aldehydes followed by nitrogen alkylation under phase-transfer conditions. The resulting axially chiral hydrazides were obtained directly from commercially available reagents in high yields and with good stereocontrol. The permutation of organocatalysts allowed easy access to all stereoisomers, enabling a stereodivergent approach to enantioenriched atropisomeric hydrazides

A triple GEM gamma camera for medical application

Abstract A Gamma Camera for medical applications 10 × 10 cm 2 has been built using a triple GEM chamber prototype. The photon converters placed in front of the three GEM foils, has been realized with different technologies. The chamber, High Voltage supplied with a new active divider made in Frascati, is readout through 64 pads, 1 mm 2 wide, organized in a row of 8 cm long, with LHCb ASDQ chip. This Gamma Camera can be used both for X-ray movie and PET-SPECT imaging; this chamber prototype is placed in a scanner system, creating images of 8 × 8 cm 2 . Several measurements have been performed using phantom and radioactive sources of Tc 99 m ( 140 keV ) and Na 22 ( 511 keV ) . Results on spatial resolution and image reconstruction are presented

On the Nature of the Rotational Energy Barrier of Atropisomeric Hydrazides

N-N atropisomers represent a useful class of compounds that has recently received important attention from many research groups. This article presents an in-depth analysis of the energy barrier needed for the racemization process of atropoisomeric hydrazides, combining an experimental and computational approach. The focus is on examining how electronic and steric factors impact the racemization process. The results obtained indicate that the barrier observed during the racemization process mainly arises from an increase in the p-orbital character of the nitrogen atoms

The Extreme Energy Events HECR array: status and perspectives

The Extreme Energy Events Project is a synchronous sparse array of 52 tracking detectors for studying High Energy Cosmic Rays (HECR) and Cosmic Rays-related phenomena. The observatory is also meant to address Long Distance Correlation (LDC) phenomena: the network is deployed over a broad area covering 10 degrees in latitude and 11 in longitude. An overview of a set of preliminary results is given, extending from the study of local muon flux dependance on solar activity to the investigation of the upward-going component of muon flux traversing the EEE stations; from the search for anisotropies at the sub-TeV scale to the hints for observations of km-scale Extensive Air Shower (EAS).Comment: XXV ECRS 2016 Proceedings - eConf C16-09-04.

Study of the a_0(980) meson via the radiative decay phi->eta pi^0 gamma with the KLOE detector

We have studied the phi->a_0(980) gamma process with the KLOE detector at the Frascati phi-factory DAPhNE by detecting the phi->eta pi^0 gamma decays in the final states with eta->gamma gamma and eta->pi^+ pi^- pi^0. We have measured the branching ratios for both final states: Br(phi->eta pi^0 gamma)=(7.01 +/- 0.10 +/- 0.20)x10^-5 and (7.12 +/- 0.13 +/- 0.22)x10^-5 respectively. We have also extracted the a_0(980) mass and its couplings to eta pi^0, K^+ K^-, and to the phi meson from the fit of the eta pi^0 invariant mass distributions using different phenomenological models.Comment: 17 pages, 6 figures, submitted to Physics Letters B. Corrected typos in eq.