4,142 research outputs found
Silicon Nanocrystal Field-Effect Light-Emitting Devices
We describe the operation of a light-emitting device in which silicon nanocrystals are electrically pumped via the field-effect electroluminescence (EL) mechanism. In contrast to the simultaneous bipolar carrier injection used in conventional p-n junction light-emitting diodes, this device employs sequential unipolar programming of both electrons and holes across a tunneling barrier from the same semiconductor channel. Light emission is strongly correlated with the injection of second carriers into nanocrystals that have been previously programmed with charges of the opposite sign. The properties of this device are well described by the model of a charge injection through Coulomb field modified tunneling processes. We additionally consider limiting performance bounds for potential future devices fabricated from nanocrystals with different radiative emission rates
Spatial and Electronic Manipulation of Silicon Nanocrystals by Atomic Force Microscopy
[As silicon-based devices shnnk, interest is increasing in fast, low-power devices sensitive to small numbers of electrons. Recent work suggests that MOS structures with large arrays of Si nanocrystals comprising a floating gate can be extremely fast, reliable and nonvolatile relative to conventional floating gate memories. In these structures approximately one electron is stored per nanocrystal. Despite promising initial results, current devices have a distribution of charge transit times during writing of nanocrystal ensembles, which limits speed. This behavior is not completely understood, but could be related to a dispersion in oxide thicknesses, nanocrystals interface states, or shifts in the electronic bound states due to size variations. To address these limitations, we have developed an aerosol vapor synthesis/deposition technique for silicon nanocrystals with active size classification, enabling narrow distributions of nanocrystal size (~10-15% of particle in the 2-10 nm size range).
The first goal of these experiments has been to use scanning probe techniques to perform particle manipulation and to characterize particle electronic properties and charging on a single-particle basis. Si nanocrystal structures (lines, arrows and other objects) have been formed by contact-mode operation and subsequently imaged in noncontact mode without additional particle motion. Further, single nanocrystal charging by a conducting AFM tip has been observed, detected as an apparent height change due to electrostatic force, followed by a slow relaxation as the stored charge dissipates. Ongoing and future efforts will also be briefly discussed, including narrowing of nanocrystal size distributions, control of oxide thickness on the nanocrystals, and measurements of electron transport through individual particles and ensembles
Community-engaged research in the St. Louis metropolitan area: Mapping existing relationships
Determination of energy barrier profiles for high-k dielectric materials utilizing bias-dependent internal photoemission
We utilize bias-dependent internal photoemission spectroscopy to determine the metal/dielectric/silicon energy barrier profiles for Au/HfO2/Si and Au/Al2O3/Si structures. The results indicate that the applied voltage plays a large role in determining the effective barrier height and we attribute much of the variation in this case to image potential barrier lowering in measurements of single layers. By measuring current at both positive and negative voltages, we are able to measure the band offsets from Si and also to determine the flatband voltage and the barrier asymmetry at 0 V. Our SiO2 calibration sample yielded a conduction band offset value of 3.03+/-0.1 eV. Measurements on HfO2 give a conduction band offset value of 2.7+/-0.2 eV (at 1.0 V) and Al2O3 gives an offset of 3.3+/-0.1 (at 1.0 V). We believe that interfacial SiO2 layers may dominate the electron transport from silicon for these films. The Au/HfO2 barrier height was found to be 3.6+/-0.1 eV while the Au/Al2O3 barrier is 3.5+/-0.1 eV
Variation in fiberoptic bead-based oligonucleotide microarrays: dispersion characteristics among hybridization and biological replicate samples
BACKGROUND: Gene expression microarray technology continues to evolve and its use has expanded into all areas of biology. However, the high dimensionality of the data makes analysis a difficult challenge. Evaluating measurements and estimating the significance of the observed differences among samples remain important issues that must be addressed for each technology platform. In this work we use a consecutive sampling method to characterize the dispersion patterns of data generated from Illumina fiberoptic bead-based oligonucleotide arrays. RESULTS: To describe general properties of the dispersion we used a linear function SD = a + bY(mean), approximating the standard deviation across arrays (Y(mean )is the mean expression of a given consecutive sample). First we examined three levels of variability: 1) same cell culture, same reverse transcription, duplicate hybridizations; 2) same cell culture, reverse transcription replicates; 3) parallel cultures. Each higher level is expected to introduce a new source of variability. We observed minor differences in the constant term: the mean values are 3.5, 3.1 and 3.5, respectively. However, the mean coefficient b increased from 0.045 to 0.147 and 0.133. We compared the coefficients derived from the consecutive sampling to those obtained from the standard deviation of individual gene expressions and found them in good agreement. In the second experiment samples we detected 11 genes with systematically different expressions between the experiment samples treated with glucose oxidase and controls and corroborated the selection using the Mann-Whitney and other tests. We also compared the consecutive sampling and coincidence method to t-test: the average percentage of consistency was above 80 for the former and below 50 for the latter. CONCLUSION: Our results indicate that the consecutive sampling method and standard deviation function provide a convenient description of the overall dispersion of Illumina arrays. We observed that the constant term of the standard deviation function is at average approximately the same for duplicate hybridization as for the assays with additional sources of variability. Furthermore, among the genes affected by glucose oxidase treatment we identified 6 genes in oxidative stress pathways and 5 genes involved in DNA repair. Finally, we noted that the consecutive sampling and coincidence test provide, under given conditions, more consistent results than the t-test. REVIEWERS: This article was reviewed by Alexander Karpikov (nominated by MarkGerstein), Jordan King and Eugene V. Koonin
Genetic Variation and Antioxidant Response Gene Expression in the Bronchial Airway Epithelium of Smokers at Risk for Lung Cancer
Prior microarray studies of smokers at high risk for lung cancer have demonstrated that heterogeneity in bronchial airway epithelial cell gene expression response to smoking can serve as an early diagnostic biomarker for lung cancer. As a first step in applying functional genomic analysis to population studies, we have examined the relationship between gene expression variation and genetic variation in a central molecular pathway (NRF2-mediated antioxidant response) associated with smoking exposure and lung cancer. We assessed global gene expression in histologically normal airway epithelial cells obtained at bronchoscopy from smokers who developed lung cancer (SC, n=20), smokers without lung cancer (SNC, n=24), and never smokers (NS, n=8). Functional enrichment analysis showed that the NRF2-mediated, antioxidant response element (ARE)-regulated genes, were significantly lower in SC, when compared with expression levels in SNC. Importantly, we found that the expression of MAFG (a binding partner of NRF2) was correlated with the expression of ARE genes, suggesting MAFG levels may limit target gene induction. Bioinformatically we identified single nucleotide polymorphisms (SNPs) in putative ARE genes and to test the impact of genetic variation, we genotyped these putative regulatory SNPs and other tag SNPs in selected NRF2 pathway genes. Sequencing MAFG locus, we identified 30 novel SNPs and two were associated with either gene expression or lung cancer status among smokers. This work demonstrates an analysis approach that integrates bioinformatics pathway and transcription factor binding site analysis with genotype, gene expression and disease status to identify SNPs that may be associated with individual differences in gene expression and/or cancer status in smokers. These polymorphisms might ultimately contribute to lung cancer risk via their effect on the airway gene expression response to tobacco-smoke exposure.Intramural Research Program of the National Institute of Environmental Health Sciences; National Institutes of Health (Z01 ES100475, U01ES016035, R01CA124640
Piezoelectrically enhanced photocathode
A photocathode, for generating electrons in response to incident photons in a photodetector, includes a base layer having a first lattice structure and an active layer having a second lattice structure and epitaxially formed on the base layer, the first and second lattice structures being sufficiently different to create a strain in the active layer with a corresponding piezoelectrically induced polarization field in the active layer, the active layer having a band gap energy corresponding to a desired photon energy
Recommended from our members
A pragmatic patient-reported outcome strategy for rare disease clinical trials: application of the EORTC item library to myelodysplastic syndromes, chronic myelomonocytic leukemia, and acute myeloid leukemia.
BackgroundNovel, pragmatic, patient-centered strategies are needed to ensure fit-for-purpose patient-reported outcomes (PRO) instruments in clinical trial research for rare diseases such as myelodysplastic syndromes (MDS), acute myeloid leukemia (AML), and chronic myelomonocytic leukemia (CMML). The objective of the current study was to select supplemental items to add to the European Organization for Research and Treatment of Cancer (EORTC) Quality of Life-Core 30 (QLQ-C30) to ensure content coverage of all important clinical concepts in patients with higher-risk (HR) MDS, low-blast count (LB) AML, and CMML, thus, improving the instrument's ability to detect clinically meaningful treatment benefit for this context of use.MethodsOur mixed methods approach comprised literature review, clinician consultation (n = 3), and qualitative and quantitative analysis of two stages of patient interview data (n = 14, n = 18) to select library bank items to supplement a generic cancer PRO, the EORTC QLQ-C30.ResultsUnique symptom (n = 54) and impact (n = 72) concepts were organized into conceptual frameworks of treatment benefit, compared with EORTC QLQ-C30 items and conceptual gaps identified. Supplemental items (n = 13) addressing those gaps were selected from the EORTC Item Library and tested with patients. Supplemental item endorsement frequencies met World Health Organization Quality of Life criteria, suggesting good targeting and relevance for this sample. However, three supplemental items were confirmed as problematic based upon cognitive debriefing results, and expert clinical consultations. Ultimately, 10 supplemental items (n = 7 symptom; n = 3 impact) were selected for the MDS/AML/CMML context.ConclusionSupplemental items were selected to enhance the conceptual coverage of the EORTC QLQ-C30 in the areas of fatigue, shortness of breath, and functioning
- …